Wiring Harnesses

Phoenix Two Prong Pig Tail

This Phoenix two-prong pig tail is the plug-in for GP-131 and

$2.49

Phoenix 3 Wire Clip On Pig Tail

This three-prong, right angle clip pigtail provides power connection for sealed lights, specifically combination stop, turn and tail lights. The red and black lead wires are bare for making power connection. Red is turn signal, and black is tail signal. The white ground wire has #10 ring terminal at the end.

$2.79

Maxxima Continuous Harness

These are Continuous Wire Harness Rolls, by Maxxima. These Harnesses come with various connects an different length leads. These light harness leads are sold as each. Enter the number of leads into the quantity field then add to your cart.

$0.99 – $1.92

Maxxima Electrical Resistor Load Equalizer

3-Pin Load Equalizer by Maxxima. When replacing an incandescent turn signal or other flashing light with an LED light, the amp draw of the LED light is so low that sometimes it will flash too slow or too fast, or not flash at all. This load equalizer will level out the amp draw with the flasher module to allow the LED light to flash at the correct speed.

$9.89

Truck-Lite Marker Clearance Fit 'N Forget M/C .180 Bullet Plug

Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps for Lifetime Lighting Warranty eligibility. 5" 16 gauge GPT wire with tin plated brass bullets/receptacles. Built as a Fit 'N Forget M/C .180 bullet terminal plug.

$3.79

Maxxima Two Prong Pig Tail

2 Pin Clearance Marker Connector, from Maxxima.

$1.59

Maxxima Electrical PL-3 Right Angle Stop / Tail / Turn

3-Pin Right Angle STT Plug with 10" Leads from Maxxima. This part can be used to replace Part Number M50900-X.

$1.59

Maxxima Electrical PL-2 Right Angle 2 Male 180 Bullet

2 Pin Right Angle Connector with Two .180 Male Bullet Connectors, from Maxxima.

$1.79

Truck-Lite Marker Clearance PL-10 Right Angle Stripped End/Ring Terminal Plug

Right angle design for use in limited space areas. 6.5" 16 gauge GPT wire with tin plated brass terminals. Built as a marker clearance PL-10 right angle plug with a stripped end and ring terminal connection.

$2.79

Truck-Lite Stop/Turn/Tail PL-3 Stripped End/Ring Terminal Plug

For use with double contact sealed incandescent lamps. Built as an 11" 16 gauge GPT wire with tin plated brass terminals. PL-3 stripped end and ring terminal plug.

$2.49

Maxxima 3-Pin Male / Male Electrical Grote Adapter

3 Pin Male to Male Grote Adapter Harness, from Maxxima.

$4.49

Truck-Lite Stop/Turn/Tail Fit 'N Forget S.S. Plug

Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire; tin plated brass terminals. Stripped end and ring terminal Fit 'N Forget S.S. plug.

$4.99

Double Female Bullet Plug W/ 4 Inch Spacing- Each

Grand General 0.180 diameter female double bullet receptacle wiring harnesses with 4 inch spacing per plug and designed for use with 0.180 diameter male bullet plugs on most lights.

$5.49

Truck-Lite Stop/Turn/Tail Stripped End/Ring Terminal Plug

For use with double contact sealed incandescent lamps. Plug is a 11" of 16 gauge GPT wire with tin plated brass terminals.

$2.49

Truck-Lite Marker Clearacne Fit 'N Forget M/C .180 Bullet/Ring Plug

Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps for Lifetime Lighting Warranty eligibility. 5" 16 gauge GPT wire with tin plated brass bullets/receptacles. Built as a Fit 'N Forget M/C .180 bullet terminal and ring terminal plug.

$3.09

Truck-Lite Marker Clearance Female PL-10 Fit 'N Forget Plug

Keeps water, salt and other corrosives from LED lamps. Combine with LED lamps for Lifetime Lighting Warranty eligibility. Used to Adapt LED lamps to conventional plug harness systems. 4" 16 gauge GPT wire with tin plated brass terminals. Built with Fit 'N Forget M/C and female PL-10 connections.

$5.09

Race Sport 4-Pack 9ft Extension Cable for RGBW Smart Rock Light Kit

Cable extension fits exclusively to the Race Sport Light RGB+W Rock Light Kits for extending LED ColorSmart pods on larger vehicles.

$89.99

Truck-Lite Stop/Turn/Tail Fit 'N Forget S.S. Plug

Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire; tin plated brass terminals. Female PL-3 Fit 'N Forget plug.

$7.19

Truck-Lite Marker Clearance .180 Bullet/Ring Terminal Fit 'N Forget Plug

Keeps water, salt and other corrosives from LED lamps. 8" 16 gauge GPT wire; tin plated brass terminals. The connector is a .180 bullet and ring terminal Fit 'N Forget S.S. plug.

$2.79

Power Up Products Resistor Load Kit (Pair)

Power Up Products resistor load kit produces the same draw as an incandescent lamp. Set to flash at a rate determined by the direct current drawn by the lamp load. Flashes at a rapid rate to indicate the burned out lamp. Each resistor is rated to 30 watts. Mounting brackets included.

$34.99