Overstock Products

This Pioneer Nano series work/scene light has an, injection molded, optic lens that is hard-coated to minimize enviromental damage. The base on this light is a cie-casted aluminum that is powder coated either in black or white. It is rated IP67 for dust and water resistance but the optic lens still changes easily. This tough nano uses 6 Super-LEDs, that are reliable and efficient.

The 6" Ultra-Thin Low-Profile Surface Mount Warning Series easily mounts to flat surfaces with two screws. Screws and caps come with the lights.

"LED" represent the cutting edge of lighting technology, LED lights operate on a totally different concept than traditional incandescent or bulb style lights. Instead of using a brittle metal filament that is susceptible to road shock and vibration. LEDs are solid-state devices utilizing an electronic chip that is encapsulated in an epoxy substrate. This design provides increased durability and a protective seal from road elements like dirt moisture and other corrosive agents.

400 Series Directional Lightheads are the perfect compact sized lighthead for lower level lighting on utility and service vehicles.

Tests for 6, 12, or 24V presence. Screw cap protects insulation probe. Chrome plated solid brass body.

Ghost LED Single Surface Mount Warning Light with black housing.

These work lights offer a high performance solution which exceeds Xenon performance and efficiency. This heavy duty range of products offers the

These V-Bar Tire Chains bite into snow and ice, giving you the traction you need to get the job done. These heavy-duty tire chains are commercial grade and feature a special V-Bar lug reinforced design from maximum strength and durability. Available in single or dual styles to fit a variety of common truck tire sizes.

Single-convoluted springs are shorter and wider, designed to resist weight more aggressively. The hollow rubber springs deliver a progressive spring rate. The more weight that pushes down on the springs the harder they work to prevent rear end sag. Whether you?re pulling a trailer or carrying a heavy load in the bed of your truck, the springs adjust automatically to keep the vehicle level at all times. Ideal for tractor trailers, tow trucks, trucks with spreaders, dump boxes, cranes or aerial devices. If your vehicle is not listed, please call our technical department at 1-800-243-3194.

Tomar's RECT-14LS dual channel, ultra high intensity, LED warning light delivers a huge impact in a small footprint. Dual channels offer independent function of up to two lamp colors with dozens of user-selectable modes. The RECT-14LS's compact size makes it the perfect auxiliary light for all the hard to fit locations. Mount directly to the body, the rearview mirror, grille or the license plate. A complete line of brackets means you can mount this light practically anywhere.

The RECT25 is the first of TOMAR's new Low-Profile series. Designed using the latest in LED technology, the RECT25 is unsurpassed in brightness and light distribution. The RECT25 is available in High Power, Standard Power and Low Current configurations and has 11 different flash rates. Standard flange mounting or optional rail mounting is available.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Dual-color lightheads can flash one color or alternate between each color. Provide multiple options in a single package. 19 selectable flash patterns can be programmed to operate independently or sync with multiple light heads. Wiring: Red = +VDC for memory 1, White = +VDC for memory 2, Black = +Chassis ground, Yellow = Synchronization wire for connecting multiple light heads.

• 12 LEDs per light
• Completely sealed to prevent water ingression
• Include mounting bezel and gasket, gasket for headlight/tailight mounting and mounting screws
• 19 flash patterns including random and steady
• 230245 Amber/Clear Blue/Amber Red/Amber
• 230245 Amber-Red-Clear
• Dia. 1.5" x H 0.9"
• 12/24 VDC

Please Note: Product Discontinued - ALL SALES FINAL!

These spotlights mount with the head on the outside of the vehicle and handle inside for easy aiming. The 6" dia. lens with high imp act PC/ABS plastic head rotates 360? and tilts 120?. A switch on the rubber grip handle turns the light on/off. Mounts through the post, door or cowl of your truck. Halogen produces 160,000 candlepower. 12V DC.

These spotlights mount with the head on the outside of the vehicle and handle inside for easy aiming. The 6" dia. lens with high impact PC/ABS plastic head rotates 360? and tilts 120?. A switch on the rubber grip handle turns the light on/off. Mounts through the post, door or cowl of your truck. LED produces 215,000-candlepower. 12V DC.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

The HighLighter? LED mini-light bar features Federal Signals patented Solaris?LED reflector technology to redirect light for substantially improved off-axiswarning. Solaris reflectors provide 360-degree of light output for work zonewarning.The HighLighter LED suction-cup and magnet mount models include acigarette lighter plug and built-in ON-OFF switch that makes them simple toinstall and just as simple to operate.

• 26 LEDS
• 2.7"H x 15.3"L x 8.4"W
• FD55PCR: Clear Lens/Red LEDs
• FS-454201-02: Amber Lens & LEDs
• 360-Degree of Light
• Built-In On/Off Switch
• Easy Installation
• Pattern Selection

Rectangular, twin beam, halogen flood work lamp uses 55-watt H3 halogen bulbs. These twin beam work lamps produce all the light you need to get the job done safely. Ideal for fleet, emergency and utility vehicles.

The M42221 is a 1.4" Thin Low Profile Design Combination Stop/Tail/Turn and Back-Up Lamp. Mounts the same as the original M42220 with Three Studs and Blunt 3 Wire Leads. Durable ABS Housing and High Impact Acrylic Lens.

This effective warning light draws instant attention. 6-LED light assembly provides maximum visibility.

This is a Whelen Pioneer SlimLine Single Flood Light that is installed in a die-cast white powder coated aluminum housing. This flood light consists of 12 white Super-LEDs with a TIR reflector. This light has a standard 8? spot light lens with the ability to change to a 40? x 20? flood lens provided with the SlimeLine Pioneer. It includes a white powder coated bail bracket with mounting hardware. The universal bail bracket has the ability to be installed either vertical or horizontal. This SlimLine Pioneer light has 3,600 usable lumens. This is a 12 volt DC light that measures 3.25" H x 6.88" W x 2.13" D. It has a 3 Amp draw and has a clear lens. All mounting hardware is included.

This battery-powered all LED Dual-Light Flashlight from Bayco Products has changed the idea of what a flashlight should be. Utilizing Bayco s exclusive Dual-Light design, this light combines a tight-beam long-throw flashlight, with a wide-beam non-focused floodlight. Flashlights are designed for illuminating distant objects. Rated at 150 lumens, and with both a momentary and constant-on functionality, the flashlight beam on this light does an excellent job of just that. However a flashlight, because of its bright center spot, is too bright to use close up. This is where the similarity to a conventional flashlight ends. In addition to the flashlight beam, this light incorporates a non-focused 120 lumens floodlight into the handle. Because the floodlight does not have a reflector, the light is unfocused and spreads out in a wide even pattern of light expressly for the purpose of providing illumination of areas that are close by. The floodlight even has a half-power mode for really close work. Additionally, both the flashlight and the floodlight can be turned on at the same time, thus allowing for dual illumination of both distant objects and ones that are close. That's the idea behind Dual Light. Powered by 4 included AA batteries, this Dual Light will run for 10 hours in Flashlight Mode, 4 hours in full-power Floodlight Mode, 10 hours in half-power Floodlight Mode and 3 hours in Dual Light Mode.

These V-Bar Tire Chains bite into snow and ice, giving you the traction you need to get the job done. These heavy-duty tire chains are commercial grade and feature a special V-Bar lug reinforced design from maximum strength and durability. Available in single or dual styles to fit a variety of common truck tire sizes.

Ghost LED Single Surface Mount Warning Light with a chrome Die Cast Aluminum Housing.

Include stop/tail/turn lights and work lights. Feature Windows based PC application to simplify programming and enhance configurability and control. Include cruise mode, nighttime manual dimming mode and other configurable options. Aluminum base and polycarbonate lenses. Include headache rack mount, 15'L power cable and 25'L controller cable.

Eliminates having to hold the wheel up while aligning and threading the bolts. Prevents the wheel from falling and causing damage.

4" Signalstat backup light. 1 Wire, replaces 3606 Chrome.

This tall Class 2 Red Beacon from Star Headlight features 26 customer-selectable flash patterns. The LED light can be left lit with the Steady-On function as well. The lens is fully encapsulated to protect light circuitry from weather and shock. The durable, lightweight polycarbonate, universal flange base can be vacuum- or magnet-mounted or permanently mounted with two or three holes or on 1 pipe.

Stud mount included for easy grille installation. Wiring: Red = +12V DC, Black = Chassis Ground, Yellow = Sync and pattern select. Single/multi-unit synchronization.

This is a 24" wide tunnel toolbox by Zip's Truck Equipment. It is constructed from aluminum and is powder-coated oxford white. This toolbox is commonly used on Zip's Battery Service trucks.

The 4 LED Cluster Lights come in a beautiful oval case which measures 1 1/2" long, 3/4" high and 1/2" deep. The LEDs are arranged in a diamond pattern for maximum brightness. Runs off of 12 volts and needs no driver.

This is an optional 12 VDC charging base for the LF35 Pioneer Life Battery Operated Portable Area Light. This base is perfect for securing your LF35 while it charges.

Extra access to rear dual tires up to 19".

Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy

Mounts to hub with pop rivet over axle cover

Choose reinforced braided stainless steel or 2-ply rubber Each set includes mounting hardware and valve caps for attaching the extenders to the hub.

Length: 9"

Width: 0.5"

Height: 1"

Old Part Number: WSR20

Designed to ensure a visible sharp-edged blue LED warning signal on the floor for increased safety. Heavy duty housing.

The Beam 325 Series post-mount spotlights from Unity Manufacturing are the only auxiliary lighting products that offer the convenience and safety of instant aimable light when and where you want it. The interior control handle with fingertip switch provides 360-degree continuous horizontal rotation and up to 120-degree vertical adjustment. These spotlights are designed to complement both modern and classic vehicles and provide long service life.

This SES Suspension Upgrade fits the rear suspension of a Ford F-350 cab & chassis. Each laser cut piece of steel is precision bent and powder-coated to ensure a quality fit. We've engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs the harder they work to prevent rear end sag. Whether you're pulling a trailer or carrying a heavy load in the bed of your truck, our hollow rubber springs adjust automatically to keep the vehicle level at all times. This SES Suspension Upgrade replaces the jounce stop on the frame. Its unique design provides superb ride quality - loaded or unloaded. (There should be a ?" to 1 ?" gap between rubber spring and axle to ensure unloaded ride quality. If the truck body is heavy, no clearance is necessary.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.

A low profile mini-light bar that provides all the high performance LED warningand signaling benefits, in a smaller size that fits all your specialapplications. Super-LED linear modules in a rugged polycarbonate base are builtto take the roughest conditions and long hours of use. They're road tested,vibration and moisture resistant and use a much lower current draw than halogenmodels. The dual switch cigarette plug has on/off and pattern control switches.Magnetic/Suction mount has (4) 50lbs pull magnets built into rubber suctioncups.

This Push Bumper from Diversified Products Mfg. is built for Ford F-250/350 2x4 Super Duty model years 2005-2007. It comes with a grille guard. This model requires OEM bumper valance for a proper fit.

This is a type 3 LED cargo light with illuminated on/off switch with a high and low brightness setting.

The JR Reach flashlight from Streamlight is a handheld unit featuring a flexible extension cable that provides 14” of overall adjustable light direction.Now shining brighter, the LED delivers 115 lumens with a beam distance of 77 meters. Powered by two AA alkaline batteries, the flashlight is controlled by a push-button tail switch and offers 7.5 hours of overall run time.

After over 15 years of research Pro-Lok introduces "The Best Damn Car Opening Manual Period!" One Book - All New - All In One - All You Need. Easy to find by manufacturer, Easy page numbering format, Easy to update, Alternate methods, 3 Ring binder, Entire book in full color, Durable Gloss Paper, Cross reference index, Tool index.

SoundOff's Universal Undercover LED Inserts are a unique and innovative customization of light output with flexible mounting options. Insert is a quick and easy retrofit as it fits into existing 1 inch strobe tube cutouts in headlight, taillight and corner lights. Insert has a super efficient heat sink, waterproof o-ring seal. Insert is self-contained with in-line flasher (10 feet wire length).

This 18-LED perimeter light draws instant attention to your truck s location. Each light assembly uses 18 LEDs - 9 of each color - for maximum visibility. This light features 18 different flash patterns and uses standard 12V DC power.

Eliminate bottoming out and broken springs. Increase overall stability. Eliminate sway. Great for work vans or suvs, utility trucks and trucks that tow trailers. Rubber springs are double-convoluted, providing a perfect blend of capacity and ride quality.

This SES Suspension Upgrade fits the front suspension of a Dodge Ram 1500/2500/3500 pickup truck. We've engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs (weight from a snowplow or heavy aftermarket accessories - such as a steel bumper) the harderthey work to prevent front-end sag.

Eliminate bottoming out and broken springs. Increase overall stability. Eliminate sway. Great for work vans or suvs, utility trucks and trucks that tow trailers. Rubber springs are double-convoluted, providing a perfect blend of capacity and ride quality.

Custer's 23" Roof-mounted light bar contains 40 high-intensity amber LEDs with amber lenses and has 360 Degrees of coverage. This unit includes a controller box which can be mounted inside the cab.

Eliminate bottoming out and broken springs. Increase overall stability. Eliminate sway. Great for work vans or suvs, utility trucks and trucks that tow trailers. Rubber springs are double-convoluted, providing a perfect blend of capacity and ride quality.

This SES Suspension Upgrade fits the rear suspension of a Dodge Ram 2500 & 3500pickup truck & cab & chassis truck. Each laser cut piece of steel is precision bent and powder-coated to ensure a quality fit. We've engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs the harder they work to prevent rear end sag. Whether you're pulling a trailer or carrying a heavy load in the bed of your truck, our hollow rubber springs adjust automatically to keep the vehicle level at all times. This SES Suspension Upgrade replaces the jounce stop on the frame. Its unique design ensures superb ride quality - loaded or unloaded. (There should be a ?" to 1 ?" gap between rubber spring and axle to ensure unloaded ride quality. If the truck body is heavy, no clearance is necessary.)

The 2500 Series ABL Halogen work lamp with heavy duty mounting bracket. Hardened glass face with impact protected optics. Low draw 2.4A at 24V.

These V-Bar Tire Chains bite into snow and ice, giving you the traction you need to get the job done. These heavy-duty tire chains a re commercial grade and feature a special V-Bar lug reinforced design from maximum strength and durability. Available in single or d ual styles to fit a variety of common truck tire sizes.

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Light up your cab or cargo area with this frosted square courtesy light from Maxxima. The stack-free, flat-screen LED design provides even light dispersion with no hot spots.

• 500 lumens
• 2 wire leads
• Surface mount
• Ultra thin 1/2" profile
• Powder-coated aluminum frame

This unique trailer rack features a hook design that lets you hang this rack from the wall of your trailer or box truck for added strength. Pre-drilled so you can anchor it to the wall for added stability.

This unique trailer rack features a hook design that lets you hang this rack from the wall of your trailer or box truck for added strength. Pre-drilled so you can anchor it to the wall for added stability.

21" LOW PROFILE RED & WHITE INTERIOR LIGHT - 1,000 LUMENS - TOUCH SENSITIVE ON/OFF SWITCH.

Please Note: Product Discontinued- ALL SALES ARE FINAL!

Kit includes two bulbs and two drivers to plug into factory wiring harness. Headlights feature integral structure molding to help en sure maximum heat conduction and an embedded cooling system to help provide optimal heat dissipation. Rocker-reflector technology he lps maximize light reflection.

Kit includes two bulbs and two drivers to plug into factory wiring harness. Headlights feature integral structure molding to help en sure maximum heat conduction and an embedded cooling system to help provide optimal heat dissipation. Rocker-reflector technology he lps maximize light reflection.

Kit includes two bulbs and two drivers to plug into factory wiring harness. Headlights feature integral structure molding to help en sure maximum heat conduction and an embedded cooling system to help provide optimal heat dissipation. Rocker-reflector technology he lps maximize light reflection.