Boom End Sheaves, Guides, & Hardware

The Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This wire rope guide cover comes off with one hand, allowing for easy wire rope installation.

This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.

This is the boom end cable guide for many light duty wreckers by Miller Industries. This cable guide replaces part number 12-0800735. See Brochures for a reference chart and Features for related parts and wrecker models this cable guide will fit.

This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2". This sheave is used on the Boom Assembly of many Century, Challenger, Holmes, and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies and parts schematics.

This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 - Current), and it will also fit on the Modular Midnight Express (2010 - Current) as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480 Wreckers.

This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes Light Duty Wreckers by Miller Industries. See Brochures for part schematics and Features for related parts and to see what models this boom end sheave will fit.

Miller Cast Iron D-ring commonly used with small wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin for Installation (Part #BA0259).

The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.

Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.

This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference charts and Features for related parts and wrecker models this shaft will fit.

This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP Wrecker by Miller Industries. It will also fit on the Modular Midnight Express. This boom sheave yoke holds the sheave which helps guide your cable from the winch to the boom. See Brochures for reference charts and Features for related parts and models this part will fit.

Note: Special Handling Fees Apply

This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.

Fits:

Vulcan 880 / 890 (03/2008 - Current)

Vulcan Modular 880 / 890 (06/1999 - Current)

These are the roll pins for the sheave boom yoke shaft on the Midnight Express by Miller Industries. Click on the brochure tab for a reference chart.

This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing cable guides will help guide the winch cable from the boom end back to the winch without it hanging down and scratching up your boom. This kit consists of 2 boom wings, one measures 27" and the other measures 32" long.

This is the Boom End Swivel for many light duty wreckers by Miller Industries. It will fit on most Century, Challenger, Champion and Holmes wreckers. See Brochures for a reference chart and Features for related parts and what models this part fits on.

This is the hydraulic hose tension pulley on the Century 300 Express, EB4 Express, and Challenger 4300 Express Series by Miller Industries. See Brochures for part schematics and Features for related parts and to see what models this fits.

This Plunger Pin from Miller Industries is used on the Subframe Assembly of Holmes DTU Generation II Wreckers. See the brochure tab for a breakdown.

This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing cable guides will help guide the winch cable from the boom end back to the winch without it hanging down and scratching up your boom. This kit consists of 2 boom wings, one measures 13" and the other measures 16" long.

This is the hydraulic hose tension track cover on the Century 300 Express, EB4 Express, and Challenger 4300 Express Series by Miller Industries. See Brochures for part schematics and Features for related parts and to see what models this fits.

This is a replacement tensioner cover for 810 P/T boom from Miller Industries.

This is the recover boom cable guide for a Century Modular 400 & 600 and also a Vulcan Modular 806, 880/890 by Miller Industries. See Brochures for reference charts and Features to see what models this guide will fit.

This is a recovery boom cable guide for the Century Modular 300 Series and Vulcan 807 and 806 by Miller Industries. See Brochures for a reference chart and Features for related parts and to see what models this guide will fit.