Light Duty Wrecker Cylinder & Pin Replacement | Seals & Cylinders

Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan

This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload wreckers by Miller Industries. This cylinder will fit Century Express 300 Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL, Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part schematics click the Brochures tab.

$860.99

Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan

This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller Industries. This extend cylinder will fit on the following models. The Century 300 Express Series, The Century 300 Modular Express Series, The Challenger 4300 Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810 Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part schematics click the Brochure Tab.

$817.99

Miller Seal Kit Swing L-Arm Cylinder 12-0303844

This is a replacement seal kit for the swing L-arm cylinder for autoload wreckers by Miller Industries. This seal kit if for cylinder part number: 12-0303844.

$88.99

Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

$93.99

Miller Roll Pin 1/4" x 1 3/4"

This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.

$0.29

Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

$43.19

Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"

This is the rear extend cylinder pin for many light duty wreckers by Miller Industries. This pin will work with most Century, Challenger, Champion, Holmes and Vulcan light duty wreckers. This pin measure 6" long with a diamter of 7/8". To view specific wrecker models this pin fits see Features below.

$31.49

Miller Right Wheel Cylinder Retainer

This is a replacement auto grip claw cylinder for second generation auto grip autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that moves your right wheel retainer on your wheel lift.

$1,458.99

Miller Seal Kit Wheel-Lift Extend Cylinder

This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger, Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

$54.99

Chevron Auto Grip Claw Cylinder, Left, 2nd Generation

Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up. Left hand claw cylinder.

$1,458.99

Miller Front Wheel Lift Extend Cylinder Pin Vulcan 880 / 890 Series

This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This pin is used to connect the wheel lift extend cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

$32.39

Miller Wheel Lift Fold Cylinder 2.5" Century Holmes Vulcan

This is a 2.5" Wheel Lift Fold Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab. This part can be used to replace Part Number, 810700000.

$1,088.99

Miller Fold Cylinder Rod Pin Century Midnight Express

This is a Fold Cylinder Pin for the Wheel Lift of a Century Midnight Express by Miller Industries. This is the rod end pin which is connected to the wheel lift. This pin is used with fold cylinder part number, 12-0715886. To view the part schematic click the Brochure tab.

$119.99

Miller Rear Wheel Lift Extend Cylinder Pin Century Holmes Vulcan 5.88" x 7/8"

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

$102.99

Miller Upper Tilt Cylinder Pin Century Challenger Champion

This is the Upper Tilt Cylinder Pin on the wrecker boom of Miller Industries Light Duty Wreckers. This pin fits the Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series and the Champion Model 101. To view related parts see Features below. To view part schematics click the Brochures Tab.

$170.99

Miller Boom Lift Cylinder Pin Century Challenger Champion Holmes

This is a clevis pin that attaches the boom lift cylinder to both the boom and the wrecker itself. This pin is used to attach boom lift cylinder IT27B on Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series, Champion 101 Series, and Holmes 440 Series. To view part schematics Click on the Brochures tab.

$59.09

Miller Wheel Lift Extend Cylinder Base Pin Century Holmes Vulcan

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

$37.79

Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$11.09

Miller Boom Lift Cylinder 3.5" Bore x 10.44" Stroke Holmes Vulcan

This is the Wrecker Boom Lift Cylinder on the Holmes 440SL, Vulcan 810 Intruder, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 3.5" bore with a 10.44" stroke. This lift cylinder connects to the subframe weldment and to the outer wrecker boom weldment. This is the cylinder that raises the boom of the wrecker up and down. This lift cylinder is also referred to as the boom elevation cylinder. To see which specific models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

$1,318.99

Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes

This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty Wreckers. This seal kit is for cylinder part number 12-0301755. To view what models this will fit see Features below. To view part schematics click the Brochures tab.

$23.39

Miller Lift Cylinder Century Challenger Holmes

This is the base lift cylinder pin on the wheel lift of Century, Challenger and Holmes wreckers by Miller Industries. This pin replaces part number 12-0801012. This cylinder pin will fit the following wreckers: Century Formula I - Duplex Tilt 411 & 412, Formula I - Duplex Tilt Super Six & 500, Formula 6000 - 600 Series, Formula 6500 - 600 Series, Metro I - Duplex Tilt, Challenger 4700 Series, and the Holmes 440 Series. To view year ranges see Features below. To view part schematics click on the Brochures tab.

$86.99

Miller Fold Cylinder Lower Pin Century Midnight Express / Vulcan 807

This is the fold cylinder lower pin on the wrecker boom of the Century Midnight Express and Vulcan 807 by Miller Industries. See Brochures for reference chart and Features for related parts.

$115.99

Miller Pin - Multi-Position

This is a multi-position pin.

$242.99

Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. This cylinder fits the wheel-lift lift cylinder used on both car carriers and light duty wreckers. See Features below to view specific models of each. To view part schematics click the Brochures tab. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

$58.99

Miller Base End Boom Lift Cylinder Pin Holmes Vulcan

This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.

$71.99

Miller Rod End Boom Lift Cylinder Pin Century Vulcan

This is the Boom Lift Cylinder Upper Pin on the Century Modular 211, Modular 400 & 600 Series, Vulcan Modular 804, Vulcan 880/890 Series and the Vulcan 896/897 Series light duty wreckers by Miller Industries. This is the pin that goes through the rod end of the cylinder and connects the lift cylinder to the boom of the wrecker. To view specific wrecker models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$90.99

Miller Cylinder 812 Claw Generation 3

This is a Miller cylinder, 812 claw. generation 3.

$1,550.99

Miller Hair Pin for Boom Lift Cylinder Pin Challenger 4300 Express

This is the Hair Pin for the Boom Lift Cylinder Pin. This hair pin keeps the clevis pin from pulling out and letting the cylinder fall off the boom.

$2.39

Miller Hydraulic Lift Cylinder Century Formula I and Formula 6500 Wheel Lifts

Note: Special Handling Fees Apply

This is the Lift Cylinder on the Wheel Lift of Century Wreckers with the Formula I and Formula 6500 Wheel Lifts. It is used on the Century Formula 6500 - 600 Series and the Modular 400 & 600 Series with these wheel lift options. To view part schematics click the Brochure tab.

Uses holding valve part number 12-0304567

Fits:
Century Formula 6500, 600 Series REV A
Century Modular 400 & 600 (01/2009 - Current)

$1,689.99

Miller Wheel Lift Cylinder Vulcan 880 / 890 Series

This is the Lift Cylinder on the Wheel Lift of the Vulcan 880 / 890 Series and Modular 880 / 890 Series light duty wreckers by Miller Industries. This cylinder attaches to the wheel lift tilt column weldment and to the wheel lift outer boom weldment. This is the cylinder that raises your wheel lift on your wrecker up and down. To see which specific wrecker models this cylinder fits please see Features below. To view the part schematics click on the Brochure tab.

$1,079.99

Miller Boom Lift Cylinder Century Formula 6500

This is the Boom Lift Cylinder on the Century Formula 6500 - 600 Series light duty wrecker by Miller Industries. This cylinder raises and lowers the boom on your wrecker. To view the part schematic click on the Brochure tab.

$2,051.99

Miller Boom Lift Cylinder Seal Kit Century and Holmes

This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty Wreckers by Miller Industries. This seal kit will fit the lift cylinder on Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view part schematics click on the Brochures tab.

$46.99

MILLER BOOM LIFT CYLINDER 408

$1,125.99

Miller Wheel Lift Upper Arm Boom Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the outer boom weldment of the wheel lift. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$65.99

Miller Rod End Wheel Lift Extend Cylinder Pin Vulcan 805

This is the Wheel Lift Extend Cylinder Pin for the Wheel Lift of the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the rod end of the cylinder. This pin is used to attach the wheel lift extend cylinder to the wheel lift inner boom weldment. To view the part schematic click on the Brochure tab.

$81.99

Miller Boom Lift Cylinder Century 211 / 212 300 Series Challenger 4300 Express Champion 101 Eagle (replaced by 12-0303992)

This is a replacement wrecker boom lift cylinder for light duty wreckers by Miller Industries. This lift cylinder will fit Century 211/212, 300 Series, Challenger 4300 Express Series, Champion Model 101 and the Eagle light duty wreckers. To view the specific models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

$910.99

Miller Wheel Lift Tilt Cylinder Century Challenger Champion Holmes Vulcan 10 Series Carrier Gen II

This hydraulic wheel lift lift cylinder is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Standard cylinder color is black. This tilt cylinder will fit both car carriers and light duty wreckers. It will fit Gen II 10 Series Miller Carriers, which includes Century, Holmes, Vulcan, Champion and Challenger including Right Approach Models.

$1,249.99

Miller Snap Ring 1" External Vulcan Modular 880 / 890

This is a 1" Snap Ring by Miller Industries. This snap ring is used on the wheel lift extend cylinder pin. This snap ring secures the pin in place. To view the part schematic click on the Brochure tab.

$2.39

Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919

This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.

$102.99

Miller Wheel Lift Fold Cylinder 4" Bore x 19.5" Stroke Vulcan 812 and 810

This is the Wheel Lift Fold Cylinder for the Wheel Lift on the Vulcan 812 Intruder and Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 4" bore with a 19.5" stroke. This cylinder attaches to the wrecker outer boom weldment and to the wheel lift outer boom weldment. This is the cylinder that folds the wheel lift up against the boom of the wrecker for travel. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$2,151.99

Miller Wheel Lift Tilt Cylinder Upper Pin Century Holmes Vulcan

This is the Upper Pin for the Wheel Lift Tilt Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin is used to connect the tilt cylinder to the subframe assembly. To view the specific wrecker models see Features below. To view part schematics click on the Brochures tab.

$68.99

Miller Wheel Lift Upper Arm Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the frame weldment. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$78.99

Miller Rod End Boom Lift Cylinder Pin Vulcan 805 / 806 / 807 / 810

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$93.99

Miller Wheel Lift Tilt Cylinder Seal Kit Century 6500

This is the seal kit for the wheel lift tilt cylinder on the Century Formula 6500 - 600 Series light duty wrecker by Miller Industries. To view part schematic click on the Brochure tab.

$109.99

Miller Lower Parrallel Arm Pin 411 / 412

This is the weldment pin that connects the outer stinger to the parallel arms on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.

$218.99

Miller Boom Lift Cylinder Seal Kit Century 712 and 716 Holmes MD616T

This is a Seal Kit for the Boom Lift Cylinder on Century 712 and 716 Series wreckers and the Holmes MD616T wrecker by Miller Industries. The part number for the boom lift cylinder that this seal kit is used on is 12-0302720. To see which specific models this seal kit will fit please see Features below. To view part schematics click on the Brochure tab.

$446.99

Miller Fold Cylinder Upper Pin Century Vulcan

This is the Fold Cylinder Upper Pin for the base end of the cylinder on Century Modular 211, Vulcan Modular 804, Modular 806 and Modular 807 light duty wreckers by Miller Industries. This is the pin that connects the fold cylinder to the boom of the wrecker. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$97.99

Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes

This is a Pin that is used in different locations on the Wheel Lift of Century Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty wreckers by Miller Industries. This pin is used to hold the tilt cylinders on to the wheel lift frame weldment. This pin also is used to attach the upper arm weldments to the wheel lift frame weldment also. To view part schematics click on the Brochure tab.

$99.99

Miller Wheel Lift Tilt Cylinder Vulcan 806 / 807 Auto Grip

This is the Wheel Lift Tilt Cylinder for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This is the cylinder that tilts the wheel lift of your wrecker up and down. This cylinder is attached to the wrecker outer boom weldment and the wheel lift outer boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$2,084.99

Miller Wheel Lift Extend Cylinder Rod Pin Century

This is the Wheel Lift Extend Cylinder Pin for the Century Modular 400 & 600 Series and the 614 Formula IIT light duty wreckers by Miller Industries. This pin is for the rod end of the extend cylinder. To see which wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$65.99

Miller Rear Wheel Lift Extend Cylinder Pin Vulcan 800 Series

This is the Wheel Lift Extend Cylinder Rear Pin for the Vulcan 800 Series light duty wreckers by Miller Industries. This includes the 880 / 890 Series, Modular 880 / 890 Series and the 896 / 897 Series. This pin is used to connect the wheel lift extend cylinder to the wheel lift inner boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

$69.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 810 Intruder

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 810 Intruder light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the wheel lift tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$85.99

Miller Wheel Lift Cylinder Seal Kit Century F6500 Holmes DFT650

This is the Seal Kit for the Lift Cylinder on the wheel lift of the Century Formula 6500 - 600 Series and Holmes 552 / DFT 650 light duty wreckers by Miller Industries. The part number for the lift cylinder is 12-0303065. To see which specific models this seal kit fits please see Features below. To view part schematics click on the Brochure tab.

$117.99

Seal Kit, ASHUN Cylinder 0303844

ASHUN cylinder 0303844 seal kit. (MTC)

$136.99

Miller Boom Lift Cylinder Seal Kit Century

This is a seal kit for the boom lift cylinder on Century Light Duty Wreckers by Miller Industries. This seal kit will fit the Century Formula I Duplex Tilt Super Six and 500 Series, and The Formula 6000 - 600 Series. To view part schematics click on the Brochures tab.

$157.99

Miller Base End Wheel Lift Tilt Cylinder Pin Vulcan 810 Power Tilt

This is the Wheel Lift Tilt Cylinder Pin for the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.

$216.99

Miller Extend Cylinder Pivot Pin Century Challenger Eagle Holmes Vulcan

This is a pivot pin for the Boom Extend Cylinder on many Miller Industries Light Duty Wreckers. This pin fits the Century 300 Express Series, Century Formula 6000 - 600 Series, Century Formula 6500 - 600 Series, Century Modular 400 & 600, Challenger 4300 Express Series, Challenger 4700 Series, Challenger 4800 Series, Eagle EB-3 Series, Holmes 440 Series, Holmes HP 552 & DFT 650, Vulcan Modular 806, 807, 880/890 wreckers. See Features below to view models this pin fits. To view part schematics click on the Brochures tab.

$75.99

Miller Lower Tilt and Lift Cylinder Pin Vulcan 800 Series

This is the Wheel Lift Tilt Cylinder Lower Pin on the Vulcan 880 / 890 Series and the Vulcan 896 / 897 Series light duty wreckers by Miller Industries. This pin is also used to attach the wrecker boom lift cylinder to the subframe weldment on the Vulcan 896 / 897 Series wrecker. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$123.99

Miller Boom Lift Cylinder Century Midnight Express

This is the Boom Lift Cylinder on Century Midnight Express Series by Miller Industries. This is the cylinder that lifts your wrecker's boom up and down. To view part schematics click on the Brochure tab.

$1,533.99

Miller Boom Lift Cylinder Base Pin Century Vulcan

This is the Boom Lift Cylinder Base Pin on the Century Modular 211, Vulcan Modular 804 and Vulcan Modular 806 light duty wreckers by Miller Industries. This pin connects the Boom Lift Cylinder to the subframe assembly. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab.

$60.99

Cylinder and Pin Replacement