Control Handle Assemblies and Hardware

Sort by

Rub-A-Fender Fenderette Fender Flare 2-1/4" Wide

Special high grade weather-resistant industrial rubber fender for trucks, busses, tankers and trailers. After a brush against a wall, loading dock, or another vehicle, rub-a-fenders return to original shape. Solve legal width problem - easily installed - always attractive. Approved for use by leading truck and bus body fabricators. They are commonly used in applications where there is no inner fender lip on which to fasten the fenderette.

$4.90

Century Seal Kit Bed Slide or Bed Tilt

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0304219, 12-0304190, and 12-0306388.

$130.99

B/A Products 5/8" Pretzel Stay Lock Pin

These lock pins are a quick and easy way to set your deck height. Available in both left- and right-angled pins. Can be used almost anywhere on your trailer.

$10.99

Miller Roll Pin 1/4" x 1 3/4"

This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.

$0.29

Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

$93.99

Miller Seal Kit Swing L-Arm Cylinder 12-0303844

This is a replacement seal kit for the swing L-arm cylinder for autoload wreckers by Miller Industries. This seal kit if for cylinder part number: 12-0303844.

$88.99

Miller 4 Spool Control Valve

This 4 Spool Hydraulic Control Valve from Miller Industries fits on Miller 10 Series Car Carriers (Prior to 2001) and Miller 30 Seri es Car Carriers (2005-Current). It is also used on most twin line Century/Vulcan Wreckers. See the attached brochures for related pa rts data. This part can be used to replace Part Number 12-0303093.

$1,080.99

Miller Fold Cylinder Pin Weldment Base End Century / Challenger

This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.

$140.99

Century Seal Kit 20 Series Century Holmes and Champion W/L In / Out

This seal kit fits, Century, Holmes, and Champion Wheel-lift In/Out cylinders afer December 2002. It is a universal kit that will fit Texas (marked TH) ot Green manufactures cylinders. Please remember that seal kits may fit different c ylinders of the same diameter. See the chart below for more information. This part can be used to replace Part Numbers: 12-0308388 and 12-0308896.

$143.99

Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"

This is the rear extend cylinder pin for many light duty wreckers by Miller Industries. This pin will work with most Century, Challenger, Champion, Holmes and Vulcan light duty wreckers. This pin measure 6" long with a diamter of 7/8". To view specific wrecker models this pin fits see Features below.

$31.49

Miller Wheel Lift Extend Cylinder Shaft Base End LCG Carriers

This is a replacement wheel lift extend cylinder shaft on LCG car carriers by Miller Industries. This is the shaft attaches the base end of the cylinder to the wheel lift outer boom weldment. To view specific models see Features below. To view the part schematics see the Brochure tab.

$29.39

Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

$43.19

Rub-A-Fender Fenderette Fender Flare 4-1/4" Wide

Special high grade weather-resistant industrial rubber fender for trucks, busses, tankers and trailers. After a brush against a wall, loading dock, or another vehicle, rub-a-fenders return to original shape. Solve legal width problem - easily installed - always attractive. Approved for use by leading truck and bus body fabricators. The fenderette extends 2 1/4 inches beyond the body side.

$7.99

Miller Seal Kit Wheel-Lift Extend Cylinder

This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger, Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

$54.99

Miller Stainless Steel Fender Flare Century Heavy Duty Wreckers

This stainless steel fenderette from Miller Industries is specifically designed for the Aluminum Body Sides of the Century Heavy Duty Wrecker Line. This fenderette is sold in one dimension and requires trimming to the proper length to fit each individual wheel well. Fits Century Integrated Wrecker Models 4024, 5130, 5230, 7035 and 9055. Also Fits Miller Industries Complete Rotator Models 1135, 1140, 1140RXP, 1150, 1150RXP, 1150R, and 1075S. This stainless steel fenderette also is compatible with Miller Industries Poly Body Line. These will also fit on some front axles of class 8 trucks, but not all. Sold Each.

$485.99

Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes

This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty Wreckers. This seal kit is for cylinder part number 12-0301755. To view what models this will fit see Features below. To view part schematics click the Brochures tab.

$23.39

Rub-A-Fender Fenderette Fender Flare 5-3/4" Wide

$8.99

Miller Wheel Lift Extend Cylinder Base Pin Century Holmes Vulcan

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

$37.79

Miller Rear Wheel Lift Extend Cylinder Pin Century Holmes Vulcan 5.88" x 7/8"

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

$102.99

Miller Fold Cylinder Rod Pin Century Midnight Express

This is a Fold Cylinder Pin for the Wheel Lift of a Century Midnight Express by Miller Industries. This is the rod end pin which is connected to the wheel lift. This pin is used with fold cylinder part number, 12-0715886. To view the part schematic click the Brochure tab.

$119.99

Phoenix Fender Flare 4.5" Chevron '97 - Current

These 4.5" Fender Flares from Phoenix USA are for a 1997 - Current, Chevron Wrecker Body. They will add the finishing touch to your wrecker while giving it a custom appearance. These fender flares also provide excellent coverage over your rear tires. They keep mud and debris from being kicked up onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Pairs (One Left & One Right).

$320.99

Jerr-Dan Pin Weldment 1.246/1.247 DIA X5

$59.99

Miller Seal Kit Challenger 6807 T50 Wrecker

This Seal Kit from Miller Industries is used with Underlift Tilt Cylinder

$135.99

Miller Upper Tilt Cylinder Pin Century Challenger Champion

This is the Upper Tilt Cylinder Pin on the wrecker boom of Miller Industries Light Duty Wreckers. This pin fits the Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series and the Champion Model 101. To view related parts see Features below. To view part schematics click the Brochures Tab.

$170.99

Miller Boom Lift Cylinder Pin Century Challenger Champion Holmes

This is a clevis pin that attaches the boom lift cylinder to both the boom and the wrecker itself. This pin is used to attach boom lift cylinder IT27B on Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series, Champion 101 Series, and Holmes 440 Series. To view part schematics Click on the Brochures tab.

$59.09

Century Seal Kit Wheel Lift Cylinder

$154.99

Miller Fold Cylinder Lower Pin Century Midnight Express / Vulcan 807

This is the fold cylinder lower pin on the wrecker boom of the Century Midnight Express and Vulcan 807 by Miller Industries. See Brochures for reference chart and Features for related parts.

$115.99

Century Seal Kit Holmac Trailer Cylinder Titan

This Seal Kit from Miller Industries is used with a Holmac Trailer Cylinder that has a 2" Bore. This Cylinder is us commonly used on Titan T5, T7 and T8 Trailers. Please see the brochure tab for breakdowns.

$132.99

Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$11.09

Miller Boom Lift Lower Cylinder Pin Century Wreckers

This is a replacement boom lift cylinder lower pin for the Century 1130/1140, 7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$301.99

Miller Boom Lift Cylinder Pin Century 3212 HD Wrecker

This is a replacement boom lift cylinder pin for the Century 3212 heavy duty integrated wrecker by Miller Industries. This pin attaches the lift cylinder to the main recovery boom outer weldment. To view the part schematics, see the Brochure tab.

$99.99

Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan

This seal kit is designed to withstand the temperatures and pressures of hydraulic cylinders and can help operators get the maximum productivity out of their machine. Resealing cylinders is one way to help lower operating costs and improve the performance of your machines hydraulic system. This cylinder fits the wheel-lift lift cylinder used on both car carriers and light duty wreckers. See Features below to view specific models of each. To view part schematics click the Brochures tab. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

$58.99

Miller Rod End Boom Lift Cylinder Pin Century Vulcan

This is the Boom Lift Cylinder Upper Pin on the Century Modular 211, Modular 400 & 600 Series, Vulcan Modular 804, Vulcan 880/890 Series and the Vulcan 896/897 Series light duty wreckers by Miller Industries. This is the pin that goes through the rod end of the cylinder and connects the lift cylinder to the boom of the wrecker. To view specific wrecker models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$90.99

Miller Hair Pin for Boom Lift Cylinder Pin Challenger 4300 Express

This is the Hair Pin for the Boom Lift Cylinder Pin. This hair pin keeps the clevis pin from pulling out and letting the cylinder fall off the boom.

$2.39

Miller Boom Lift Cylinder Seal Kit Century and Holmes

This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty Wreckers by Miller Industries. This seal kit will fit the lift cylinder on Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view part schematics click on the Brochures tab.

$46.99

Miller Lift Cylinder Weldment Pin 15 / 20 / 30 Series Car Carriers

This is a replacement lift cylinder pin weldment for the 15 , 20, and 30 series car carriers by Miller Industries.

$86.99

Miller Valve 6 Spool Wavoil 311 Century Express

This is a Century Express valve 6 spool Wavoil 311 from Miller Industries.

$5,430.99

Miller Wheel Lift Extend Cylinder Shaft Rod End LCG Carriers

This is a replacement wheel lift extend cylinder shaft on LCG car carriers by Miller Industries. This is the shaft attaches the rod end of the cylinder to the wheel lift inner boom weldment. To view specific models see Features below. To view the part schematics see the Brochure tab.

$43.09

Miller Base End Boom Lift Cylinder Pin Holmes Vulcan

This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.

$71.99

Phoenix 3" Fender Flare Century 400 and 600 Series

Note: Special Handling Fees Apply

These 3" wide Fender Flares from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. They will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the towed vehicle. The addition of fender flares will help the truck comply with certain state tire exposure regulations. These fender flares do not fit the early 401-402 or other straight sided Century bodies. Sold as Pairs (One Left & One Right).

Cannot ship by mail.

Here's the finishing touch for your wrecker!
Custom designed for a perfect fit on a variety of popular wrecker body styles
These flares can be painted to match
Easy installation
Create a clean custom look
They fit light and medium duty wrecker bodies
Priced per pair
3" wide
Body Accessory for Century 411-412 & 601-602
Do Not Fit the Early 401-402 or Other Straight Sided Century Bodies
Old Part Number: PBF10

$320.99

Phoenix 2.5" Fender Flare Jerr-Dan '93 - Current

This Phoenix Fiberglass Rear Body Fender Flare is a body accessory for Jerr-Dan - 1993 to Current.

$320.99

Miller Wheel Lift Upper Arm Boom Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the outer boom weldment of the wheel lift. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$65.99

Miller Boom Elevation Cylinder Seal Kit Century Wreckers

This Boom Elevation Cylinder from Miller Industries is used on the Hydraulic Cylinders Assembly of Century 5025 and 5030 Wreckers. It is also used on the Hydraulic Cylinders Assembly of Challenger CH-30T/CH-30T3 Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

$78.99

Miller Fold Cylinder Upper Pin Century Vulcan

This is the Fold Cylinder Upper Pin for the base end of the cylinder on Century Modular 211, Vulcan Modular 804, Modular 806 and Modular 807 light duty wreckers by Miller Industries. This is the pin that connects the fold cylinder to the boom of the wrecker. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$97.99

Miller Base End Wheel Lift Tilt Cylinder Pin Vulcan 810 Power Tilt

This is the Wheel Lift Tilt Cylinder Pin for the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.

$216.99

Miller Rod End Wheel Lift Extend Cylinder Pin Vulcan 805

This is the Wheel Lift Extend Cylinder Pin for the Wheel Lift of the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the rod end of the cylinder. This pin is used to attach the wheel lift extend cylinder to the wheel lift inner boom weldment. To view the part schematic click on the Brochure tab.

$81.99

Phoenix Old Style Fender Flare 3.5" Chevron '97 - Current

These 3.5" wide Fiberglass Fender Flares from Phoenix USA for a Chevron ('97 - Current) body will add a custom look to your wrecker. This is an old style medium width fender flare. It will also provide excellent coverage over your rear tires. The Flares keep mud and debris from being thrown onto a nice paint job or on the towed vehicle. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Pairs (One Left & One Right).

$320.99

Miller Pin - Multi-Position

This is a multi-position pin.

$242.99

Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919

This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.

$102.99

Miller 4 Spool Walvoil Valve

This 4-Spool Control Valve from Miller Industries is used on Twin Line Wreckers. It is used on Century, Challenger and Vulcan Wheel Lifts made in 2008 or newer. See the features below for a list of wreckers.

$940.99

Miller Wheel Lift Tilt Cylinder Upper Pin Century Holmes Vulcan

This is the Upper Pin for the Wheel Lift Tilt Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin is used to connect the tilt cylinder to the subframe assembly. To view the specific wrecker models see Features below. To view part schematics click on the Brochures tab.

$68.99

Miller Wheel Lift Upper Arm Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the frame weldment. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$78.99

Miller Rod End Boom Lift Cylinder Pin Vulcan 805 / 806 / 807 / 810

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$93.99

Phoenix Left Fender Flare 4" Century 400 and 600 Series

This 4" wide Fiberglass Fender Flare from Phoenix USA for Century 411 - 412 and 601 - 602 bodies will add a custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flare will help keep mud and debris from being kicked up onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each (One Left Rear).

$160.99

Phoenix Single Fender Flare 4.5" Chevron '97 - Current

This 4.5" Fender Flare from Phoenix USA for a 1997 - Current Chevron wrecker body will add a clean and custom look to your wrecker. They also will provide excellent coverage over your rear tires. The flares help keep mud and debris from being thrown onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each.

$160.99

Miller Lower Parrallel Arm Pin 411 / 412

This is the weldment pin that connects the outer stinger to the parallel arms on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.

$218.99

Miller Boom Lift Cylinder Seal Kit Century 712 and 716 Holmes MD616T

This is a Seal Kit for the Boom Lift Cylinder on Century 712 and 716 Series wreckers and the Holmes MD616T wrecker by Miller Industries. The part number for the boom lift cylinder that this seal kit is used on is 12-0302720. To see which specific models this seal kit will fit please see Features below. To view part schematics click on the Brochure tab.

$446.99

Miller Rear Wheel Lift Extend Cylinder Pin Vulcan 800 Series

This is the Wheel Lift Extend Cylinder Rear Pin for the Vulcan 800 Series light duty wreckers by Miller Industries. This includes the 880 / 890 Series, Modular 880 / 890 Series and the 896 / 897 Series. This pin is used to connect the wheel lift extend cylinder to the wheel lift inner boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

$69.99

Miller Stinger Pivot Pin Century 300 Series / 211 / 212

This is the stinger pivot pin on the wrecker boom of the Century 211/212/300 Series by Miller Industries. See Brochures for reference chart and Features for related parts.

$86.99

Miller Wheel Lift Tilt Cylinder Seal Kit Century 6500

This is the seal kit for the wheel lift tilt cylinder on the Century Formula 6500 - 600 Series light duty wrecker by Miller Industries. To view part schematic click on the Brochure tab.

$109.99

1 - 60 of 358 items