Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Replacement plug kit for QuickCable Plug Jump Start Cables. Includes one
housing and two contacts. This power connector features silver-plated,
electrolytic copper contacts for low resistance and high conductivity.
Fully annealed electrolytic copper construction provides excellent
conductivity. Wire guage indentification marked on lug barrels. Heat-shrink
tubing should be used over all battery terminal connections. Tin-plated for
corrosion resistance. Crimpable.
This Replacement Plug Cap protects the contacts on your jump-start pack by keeping them clean from outside elements. Includes lanyar
d for easy attachment. Works with the plug assembly for SM7A and SM7B.
Goodall by Vanair extra-heavy duty battery clamps for 2/0 gauge cable is rated for 1000
Continuous Amp's. They feature power jaw clamps. A cable that runs to each
side of clamp powers both jaws and allows higher amperage flow. Installs
easily in the field with a simple butt connector crimp. Butt connector is
already installed ready to accept your cable and crimp, shrink tube (red &
black) is packaged with them for a clean finished look. Cable not included,
clamps only.
Several Jump-N-Carry jump starter models feature a built-in charger, with the charging tines exiting the case to accept an extension cord connection. This extension cord is properly mated to fit the charger cavity, making it an ideal extension cord to use with your Jump-N-Carry if you don't already have one.
Clore Automotive's 12 Volt Extension Cord used to recharge the jump starter
from a 12V power source or to make a jump starter to jump starter connection.
Included with most Booster PAC and Jump-N-Carry lead acid jump starter models
(does not include the JNC300XL).
OEM replacement battery for Jump-N-Carry jump starter models JNC660/JNC770/JNCAIR. Includes battery hardware and instructions. Note:
The are many batteries sold as replacement batteries for Jump-N-Carry jump starters. Not all batteries are created equal, even if t
hey match in size. If you wish to experience Jump-N-Carry performance, your jump starter needs to have a Jump-N-Carry battery. It's
that simple.
Introducing the all-new NOCO Lithium 12V Lithium Powersport Battery. It's
better than lead-acid motorcycle batteries in almost every way: no sulfation,
no activation, no acid, no maintenance, no water needed, and it comes fully
charged and ready to install.
These heavy duty battery terminals are lead-free and made from a durable
magnesium/aluminum alloy with a plated steel cable clamp and hardware. They
are intended for use for 6 and 12-volt batteries: top post, side post, truck,
and marine battery terminals.
Replace weakened clamps on your booster cables with a pair of heavy-duty
mechanic charging clamps from QuickCable. Rated for 12V, 400A applications, the
handles are color-coded for positive and negative battery connections and are
suited nicely for larger battery chargers and jump starters.
This battery hold down set features long threads for use with battery trays to accommodate all crossbar/frame designs including Quick Hold products. Sold as a pair with hardware included.
Wall charger for ES5000, ES6000 and ES1224 models (see details in specifications as to which versions of each are compatible with this charger). Combined with these jump starter models, this charger meets all current efficiency standards.
The XGC4 56-Watt Power Adapter is a power supply for rapidly recharging NOCO
Genius Boost Ultra Safe Lithium Jump Starters. It safely recharges NOCO Genius
Boost Ultra Safe Lithium Jump Starters up to five times faster than traditional
USB wall or car chargers.
OEM replacement battery for Jump-N-Carry jump starter model JNC950. Includes battery hardware and instructions. Note: The are many batteries sold as replacement batteries for Jump-N-Carry jump starters. Not all batteries are created equal, even if they match in size. If you wish to experience Jump-N-Carry performance, your jump starter needs to have a Jump-N-Carry battery. It's that simple
Polycarbonate handle makes plugging and unplugging your Lexan Plug Jump-Start Set much easier. Fits all Lexan quick connect plugs th
at measure 4-1/2"L, including GL18, SM1 and SM7.
Goodall by Vanair plug, 175 or 350 amp, no contacts. This is as the housing only, for the contact you need to order contact part number 820-431. It takes 2 contacts per plug. Choose from Grey or Blue.
OEM replacement battery for Jump-N-Carry jump starter model JNC1224. Includes 2
batteries, hardware and instructions. Note: The are many batteries sold as
replacement batteries for Jump-N-Carry jump starters. Not all batteries are
created equal, even if they match in size. If you wish to experience
Jump-N-Carry performance, your jump starter needs to have a Jump-N-Carry
battery. It's that simple.
Keep your Ramsey Quick Connect winch powered up with this replacement plug from
Superior Signal. The plug can also be found attached to the end of the Quick
Connect Battery Cable (Part No.
Quick Cable Standard Battery Boxes fits all traditional battery group sizes
including the all new orbital or spiral celled, deep cycle, high performance
batteries. This product is impervious to acid, gasoline, oil and solvents. Rust
proof and UV protected.
This in-cab jump pack charging cord from Rescue saves time by letting you
recharge your jump packs right inside your roadside service vehicle. The
current limiter protects from circuit overload and works with the 12V cigarette
plug. The unit supplies plenty of power to recharge the battery pack but not
enough to damage the vehicle.
The NOCO GBC010 12V Accessory Kit connects directly to the NOCO Boost jump
starter's XGC IN and OUT ports. Easily power your favorite 12-volt devices
directly from a GB70, GB150, GB250+, GB251+ or GB500, like a tire inflator,
vacuum, coffee maker, fan, cooler and more. Made from a high-conductivity 16AWG
100-percent copper wire and a rated capacity of 15-amperes.
Cables are 4 gauge with a standard 3/8" stud hole. Antimonial lead connectors
resist corrosion, die cast process seals copper wire from acid fumes and
corrosive salts. The tinning of copper wire before casting ensures durable bond
between the wire and connector.
The E404 Battery Cleaner and Acid Detector features a specialized foaming agent which turns pink upon contact with battery acid. It instantly neutralizes, dissolves, and removes battery corrosion from battery terminals, cables, hold-downs, battery boxes and more. It is formulated to assure maximum current flow and reduce potential voltage leakage. Comes packaged in a 12.25-ounce aerosol can.
Fully annealed electrolytic copper construction provides excellent
conductivity. Wire gauge identification marked on lug barrels. Heat-shrink
tubing should be used over all battery terminal connections. Unique flared
barrel design eliminates wire strand hang-ups.
Long thread accommodates all crossbar/ frame designs including QuickHold
products. Use with battery trays. "J" style bend eliminates any need to shift
or remove battery. Sold as pair - hardware included.
Cables are 4 gauge with a standard 3/8" stud hole. Antimonial lead connectors
resist corrosion, die cast process seals copper wire from acid fumes and
corrosive salts. The tinning of copper wire before casting ensures durable bond
between the wire and connector.