Dollies

This is a replacement bolt on spindle kit for the right or left hand side of the X-Series Standard Duty Dolly by In The Ditch.

Note: Special Handling Fees Apply

This lightweight Breakover Bar from In The Ditch was designed to work with a Speed Dolly and XD Dolly. It has a soft grip handle, and it is the lightest dolly bar on the market.

• Lightweight hollow tubing
• CNC-machined solid steel end
• Soft grip handle
• Length produces leverage

This is an all-purpose rubber replacement tire for Dollies, Trailers, Hand Trucks & Carts. This is the tire only.

This is a replacement Dolly Pin Kit for the X-Series Dollies by In The Ditch. Requires 2 pins per side frame.

This is a replacement custom snap button for the Speed Dolly aluminum telescoping axles by In The Ditch. This button is made from stainless steel to help prevent against corrosion.

Prolong the life of and prevent maintenance issues on your In The Ditch Speed Dolly with this replacement 4 on 4" cast hub and bearing assembly. 1250-lb. capacity when assembled. This hub is for the SLX (Greaseable) style dollies. These are NOT interchangeable with the XL (Sealed Hub) dollies

In The Ditch's Locking Simple Mount is a great low cost way to hold your Speed Dollies and keep them safe. This mount is the same as the Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Choose from the Standard or the XD Mounts. The Standard is made for 4.8 Tires and the XD is made for 5.70 tires. Sold as Each.

This is a complete aluminum hub assembly for a Collins Dolly by Collins Manufacturing. This is a 5-lug hub that is made in the USA. This kit includes all races, bearings, spindle nut, washer, cotter pin, grease seal, bolts and dust cover that you will need to complete your hub assembly.

Don't neglect worn or damaged safety ratchets on your Collins SLZ Hi-Speed Dolly Set. Replace them today with new assemblies from Zip's AW Direct. We supply zinc-plated replacement ratchets for the left or right side of your Collins dollies for 2006 and newer models. With spring-assisted lever action, the safety ratchets keep the dolly's pry bar in check in case it slips or if you lose your footing on loose gravel or on slippery surfaces. They also allow for greater mobility in tight spaces and give you peace of mind while towing down the road.

These dolly sets from In The Ditch offfer the best capacity with either a powder-coated or zinc plated frame and aluminum axle. As with any X-Series model, the manufacturer has added a fifth adjustment hole to widen the dolly combination to 85 inches, and the wheels feature a patented cam-lock design to move from storage position to on-the-road use. The unit is also low maintenance as the sealed hub never needs to be greased and the bolt-on spindles are easy to replace. These dollies are available with either 4.80 or 5.70 tire size.

GoJak Dollies are the solution to your automobile positioning problems. GoJaks operate on the principle of a quick action, bi-directional, double-pawl ratchet. Mechanical leverage applied to the foot pedal progressively "squeezes" the vehicle tire between the rollers until the tire lifts smoothly off the ground. The rollers touch only the tire and no contact is made with the vehicles frame or undercarriage. The low center of gravity after lifting helps make these dollies safe and stable in use. The pure mechanical design eliminates the need for electric power, compressed air, or slow hydraulics.

This is a locking pin for the simple mounts for In The Ditch.

Note: Special Handling Fees Apply

When responding to calls, the last thing we want is to spend a lot of time on the shoulder. The In The Ditch® Dollies and the new X-Series 4th Gen Axles are the perfect combination for reliable, durable, long lasting towing. And they keep getting better. The fourth generation of In The Ditch® Dolly Axles is the most advanced dolly axle in the world.

The new X-Series 4th Gen Axle is WIDER than ever. Not only is the Gen 4 Axle wider, but it is also now more CAPABLE at towing mid-sized SUVs and cars with wider stances than ever before. It maintains the same number of adjustment holes using a stainless-steel snap button. With new design changes, the gen 4 axle is more DURABLE to handle the rigors of towing. Our custom extruded aluminum tubing now features a stainless-steel rivet design. The new axle caps feature a more ergonomic design with a built-in handle, while maintaining the positive camber feature that's proven to help dolly tire and bearing longevity. With Almost 20 years of dolly manufacturing experience, you can rest assured you are getting the best axle on the planet.

• 88.75" total Width
• X-Series Design with 5 Adjustment Holes
• Stainless Steel Snap Button Axle Lock
• Positive Camber Axle Caps
• Optional T-Handle accessory for improved grip and also to hang Axles from our Axle Slide Tunnel Mount - Part #ITD-22092
• Custom Extruded Aluminum is lightweight and strong
• 2,000lb Capacity at Full Extension per Axle. 4,000lb Extended Capacity as a set
• ITD Endurance Powder Coated Axle Caps
• Fabricated Tire Plate is Designed to work perfect with our Speed Spacer
• Sold Individually
• DO NOT MIX AND MATCH WITH DIFFERENT GENERATIONS OF AXLES

Replacement tire for In The Ditch's Speed Tow Dolly. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum load rating capacity.

This is a replacement sealed hub bearing kit for the X-Series dollies by In The Ditch.

This is a replacement bolt on spindle kit for the Right or left hand side of the X-Series Standard Duty Dolly by In The Ditch.

This is a replacement cam lock rebuild kit for the Speed Dolly. This kit includes a roll pin, plunger, and spring.

This is a steel flange bushing.

In The Ditch Towing Products provides a replacement sealed hub assembly.

This is a replacement shoulder bolt assembly for the spindle assembly used on the Collins Dollies.

This is a dolly safety lock rebuild kit by Collins Manufacturing. This rebuild kit includes the safety lock grease zerk, safety lock roll pin, safety lock spring, safety lock ball, and safety lock handle.

This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.

Update worn and tired straps on your In The Ditch Speed Tow dolly with this replacement strap. The black strap includes a ratchet and coated S-hooks for proper securement of a tire to the tow dolly.

This Rubber Plug for ITD-7123 Grease Cap is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This Grease Cap is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This machined-aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements.Rim comes with a high pressure valve stem installed.

These In The Ditch tow dollies hold up well against road grime, while the lightweight aluminum axle and ergonomic handle make it simple to maneuver on the recovery site. Bolt-on spindles are easy to replace with basic hand tools, and the speed-lube design (SLX) makes packing bearings effortless with a center grease zerk on this assembly. These dollies feature best in class capacity, and are available in powder coat black or zinc plated finish. They are also available with a tire size of 4.80 or 5.70.

This "W" Mount from In The Ditch is great for those wanting an easy solution for quickly mounting and storing their break over bar and axles. This mount is ideal for mounting in the back of a pickup, on top of a tool box or on a wrecker deck. Mount can be locked by using a Pad-Lock, which is not included. The break over bar is secured in place with a thumbscrew. This mount is made from steel and comes with a black finish. Get your

GoJak's 4" Caster Assembly - Violet Ring (2nd Gen) are durable and easy moving.

Use this kit to replace damaged, worn or frozen bearings in your dolly wheels. This maintenance set fits most 1 dolly spindles. Buy one kit for each wheel. Replaces old Part No. CD-BEARING.

This is a replacement bolt on spindle kit for the right or left hand side of the X-Series Extreme Duty Dolly by In The Ditch.

Note: Special Handling Fees Apply

The life of a tow truck operator is a tough and dangerous one. Physically demanding, close to high-speed traffic, and never entirely sure what could go wrong. Every tow truck operator deserves as many conveniences as possible. This is why we made the Self-Loading Dolly Mount. This handy tool helps make their day a bit safer, a bit easier, and a bit better.

Able to load and unload dollies quickly and efficiently, you can rely on the Self-Loading Dolly Mount. This shock assisted mount allows the tow truck operator to load dollies from their power zone, the optimal lifting position for users that eliminates back and shoulder strain. Additionally, it eliminates side frame and truck bed damages from impacts with the dollies. To absorb these benefits, operation is a breeze. To pull the mount down, engage the release handle and gently pull back on the dolly. The dolly will float down to the operator with shock assistance. To mount or dismount the dolly, engage the cup latch on the tilt cup. This will open the tilt cup or lock the tilt cup into place. Lastly, pull the release handle and guide the mount back up as the shock assistance takes away all the lifting. For one last securing method, insert the latch pin to prevent the dolly side frame from falling in transit. It's that easy!

Additionally, it also protects tow truck operators and their equipment by preventing them from getting on the bed of the truck, especially trucks with high beds. No need to worry about slipping or falling off, as you can stay in one spot on the ground while it loads. Plus, like previously mentioned, its lock pin/latch mechanism prevents the dollies from falling down in transit, preventing damage to the side of your vehicle and the dollies. More importantly, it eliminates the chances of an accident caused by an unstable mount. By locking it in place, the tow truck operator can feel safe knowing it won’t cause any problems on the road.

Another great feature of the dolly mount is that it’s designed to fit most dollies. With it's adjustable wheel mount brackets for both 4.80 and 5.70 sized tires, this mount ensures you can easily integrate into your specific system. Plus, with how easy it is to use, it will speed up any job you’re on. Why wouldn’t you want this on your truck?

• Sold as a Pair
• Easy unloading, restowing, and mounting
• Steel construction
• Adjustable wheel mounting brackets to accommodate both 4.80 and 5.70 size tires
• Pull Down Mount: Engage release handle and pull back on dolly--dolly floats down to operator with shock assistance
• Dollies Off/On: Release cup latch to remove dolly from tilt cup or release and lock cup latch to mount dolly onto tilt cup
• Lift Up Mount: Pull release handle and guide dolly up with shock assistance
• Shock spring does all the heavy work (no more heavy lifting)
• Holds dollies on the bed of a truck
• Latch/pin/lock for securing
• Compatible with most dollies including In The Ditch and Collins
• There is a spacer that can be removed to accommodate the bigger tube on the ITD dollies
• Dolly retrievable in the power zone
• Compact set up
• Great for trucks with higher beds
• Replacement shock # BP-3023460

This is a replacement dust cover for the wheel assembly on a Collins dolly hub by Collins Manufacturing. This cover keeps all dirt and filth out of the wheel bearing of the dolly wheel.

Replacement 5.70 -8 D rated tire. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum load rating capacity.

This is a replacement bolt on spindle kit for the right or left hand side of the X-Series Extreme Duty Dolly by In The Ditch.

Note: Special Handling Fees Apply for Specific Items

This is a locking dolly axle mounting system, by Collins Manufacturing, will ensure safe storage for your cross rails and pry bar. It can be mounted to the deck for easy accessibility. This system allows you to pad lock your axles to prevent theft. These mounts come factory powder coated black.

The In The Ditch Cycle Caddy is the easiest way to load a motorcycle onto the deck of a carrier. The innovative Speed Ramp on the Cycle Caddy makes loading a motorcycle smooth and nearly effortless. No more having your cycle loader jump out of the way as you try to load a motorcycle. Our Cycle Caddy stores in a folded, compact position saving you valuable room in your tool box. The Cycle Caddy not only stores easily it also assembles easily and has easy to follow instructions printed right on it. This Caddy is made from steel, comes in a tuff coat black finish, and is strong enough to support a motorcycle up to 950 lbs.

1" Grease Seal, used for Speed Dolly, 4 bolt hub.

This is a "Z" Series zinc plated dolly side frame with aluminum hubs and "NO" wheels & tires from Collins Mfg.

This Spindle Nut Retainer is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.

Roll disabled vehicles with ease using WreckRoller dollies. Designed to fit most tires, whether aired up or flat, WreckRollers use 18 commercial-grade rubber wheels and a sealed bearing roller to move along rough terrain and roll up a rollback deck without bending wheels or bottoming out. They also prevent the vehicle from drifting sideways. Because it is roughly the same width as most tires, no extra space is needed for loading or unloading.

These are deck mounted spindle mount brackets for Collins Manufacturing Dollies. These mounts come in 2 different sizes depending on the tire size of your dolly. Please select your tire size from the dropdown menu to select the correct mount you will need for your application. These mounts are sold as pairs.

Camlock assembly for Century Car Carrier from Diversified Products.

• Load Range D (992 lbs)
• 4.80 x 8
• Sold as Each

This is a replacement left hand spindle assembly for Collin's Dollies. This spindle works with the "Zinc Plated" SZL Dollies built after February of 2016 with 4.80 or 5.70 tires. It includes a machined shoulder bolt.

Dust cap for 4 bolt hub on Speed Dolly.

This is a replacement right hand spindle assembly for Collin's Dollies. This spindle works with the "Zinc Plated" SZL Dollies built after February of 2016 with 4.80 or 5.70 tires. It includes a machined shoulder bolt.

This is a replacement compression spring for the dolly rails.

Note: Special Handling Fees Apply

This Spindle Jam Nut is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This D-Type Spindle Washer is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

When you have a car that just can't keep up, you'll need a dolly that can go the distance. Thanks to its lack of towing distance regulations, you can take a car just about anywhere with the Hero Line Hi-Speed Dolly by Collins. Whether it be down the road or onto the interstate, you can count on this dolly to carry the car.

This machined aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements. Rim comes with a high-pressure valve stem installed.

Zip's Cam Locks have a plunger and spring design that is easier and more reliable to use than the old style locking pins. Allows for one hand operation to open the assembly and put it into the automatic locking positions. The pin will fully engage once the holes in your bar line up. Used on sling arms, stabilizer legs, wheel lift forks and more.

Assembly used for Self Lube Speed Dolly (SLS) from In The Ditch. This assembly comes with bearings and race.

This is a replacement rail plunger for aluminum rails from Collins Dolly.

These Pro Series Dolly Bunks from In The Ditch fit all sizes and all brands of dollies with either 4.80 x 8 or 5.70 x 8 tires. Dolly bunks are made from 3/16" thick aluminum and will last for years. This set includes two complete bunks and two lockable retaining chains.