Tow Dollies

In The Ditch's Locking Simple Mount is a great low cost way to hold your Speed Dollies and keep them safe. This mount is the same as the Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Choose from the Standard or the XD Mounts. The Standard is made for 4.8 Tires and the XD is made for 5.70 tires. Sold as Each.

These dolly sets from In The Ditch offfer the best capacity with either a powder-coated or zinc plated frame and aluminum axle. As with any X-Series model, the manufacturer has added a fifth adjustment hole to widen the dolly combination to 85 inches, and the wheels feature a patented cam-lock design to move from storage position to on-the-road use. The unit is also low maintenance as the sealed hub never needs to be greased and the bolt-on spindles are easy to replace. These dollies are available with either 4.80 or 5.70 tire size.

This is a locking pin for the simple mounts for In The Ditch.

Update worn and tired straps on your In The Ditch Speed Tow dolly with this replacement strap. The black strap includes a ratchet and coated S-hooks for proper securement of a tire to the tow dolly.

These In The Ditch tow dollies hold up well against road grime, while the lightweight aluminum axle and ergonomic handle make it simple to maneuver on the recovery site. Bolt-on spindles are easy to replace with basic hand tools, and the speed-lube design (SLX) makes packing bearings effortless with a center grease zerk on this assembly. These dollies feature best in class capacity, and are available in powder coat black or zinc plated finish. They are also available with a tire size of 4.80 or 5.70.

This "W" Mount from In The Ditch is great for those wanting an easy solution for quickly mounting and storing their break over bar and axles. This mount is ideal for mounting in the back of a pickup, on top of a tool box or on a wrecker deck. Mount can be locked by using a Pad-Lock, which is not included. The break over bar is secured in place with a thumbscrew. This mount is made from steel and comes with a black finish. Get your

Note: Special Handling Fees Apply

The life of a tow truck operator is a tough and dangerous one. Physically demanding, close to high-speed traffic, and never entirely sure what could go wrong. Every tow truck operator deserves as many conveniences as possible. This is why we made the Self-Loading Dolly Mount. This handy tool helps make their day a bit safer, a bit easier, and a bit better.

Able to load and unload dollies quickly and efficiently, you can rely on the Self-Loading Dolly Mount. This shock assisted mount allows the tow truck operator to load dollies from their power zone, the optimal lifting position for users that eliminates back and shoulder strain. Additionally, it eliminates side frame and truck bed damages from impacts with the dollies. To absorb these benefits, operation is a breeze. To pull the mount down, engage the release handle and gently pull back on the dolly. The dolly will float down to the operator with shock assistance. To mount or dismount the dolly, engage the cup latch on the tilt cup. This will open the tilt cup or lock the tilt cup into place. Lastly, pull the release handle and guide the mount back up as the shock assistance takes away all the lifting. For one last securing method, insert the latch pin to prevent the dolly side frame from falling in transit. It's that easy!

Additionally, it also protects tow truck operators and their equipment by preventing them from getting on the bed of the truck, especially trucks with high beds. No need to worry about slipping or falling off, as you can stay in one spot on the ground while it loads. Plus, like previously mentioned, its lock pin/latch mechanism prevents the dollies from falling down in transit, preventing damage to the side of your vehicle and the dollies. More importantly, it eliminates the chances of an accident caused by an unstable mount. By locking it in place, the tow truck operator can feel safe knowing it won’t cause any problems on the road.

Another great feature of the dolly mount is that it’s designed to fit most dollies. With it's adjustable wheel mount brackets for both 4.80 and 5.70 sized tires, this mount ensures you can easily integrate into your specific system. Plus, with how easy it is to use, it will speed up any job you’re on. Why wouldn’t you want this on your truck?

• Sold as a Pair
• Easy unloading, restowing, and mounting
• Steel construction
• Adjustable wheel mounting brackets to accommodate both 4.80 and 5.70 size tires
• Pull Down Mount: Engage release handle and pull back on dolly--dolly floats down to operator with shock assistance
• Dollies Off/On: Release cup latch to remove dolly from tilt cup or release and lock cup latch to mount dolly onto tilt cup
• Lift Up Mount: Pull release handle and guide dolly up with shock assistance
• Shock spring does all the heavy work (no more heavy lifting)
• Holds dollies on the bed of a truck
• Latch/pin/lock for securing
• Compatible with most dollies including In The Ditch and Collins
• There is a spacer that can be removed to accommodate the bigger tube on the ITD dollies
• Dolly retrievable in the power zone
• Compact set up
• Great for trucks with higher beds
• Replacement shock # BP-3023460

Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.

These are deck mounted spindle mount brackets for Collins Manufacturing Dollies. These mounts come in 2 different sizes depending on the tire size of your dolly. Please select your tire size from the dropdown menu to select the correct mount you will need for your application. These mounts are sold as pairs.

When you have a car that just can't keep up, you'll need a dolly that can go the distance. Thanks to its lack of towing distance regulations, you can take a car just about anywhere with the Hero Line Hi-Speed Dolly by Collins. Whether it be down the road or onto the interstate, you can count on this dolly to carry the car.

These Pro Series Dolly Bunks from In The Ditch fit all sizes and all brands of dollies with either 4.80 x 8 or 5.70 x 8 tires. Dolly bunks are made from 3/16" thick aluminum and will last for years. This set includes two complete bunks and two lockable retaining chains.

Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.

This Universal Mount system is a perfect choice for those wanting a low profile all-in-one mount that holds a Speed Dolly frame, axle and break over bar. The Universal Mount uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element wrecker bodies but can be used on any brand wrecker body. The Kit comes complete with everything needed to hold 2 Dolly frames, 1 break over bar and 2 axles and comes in our Tuff Coat Black Finish. Pick from the Standard or the XD Mounts. The Standard Mount is made for 2 Speed Dollies with 4.80 Tires. The XD Mount is made for 2 XD Dollies with 5.70 Tires. Sold as set.

The Speed Spacer from In The Ditch solves that age old problem of how to dolly a vehicle with a flat tire. They have designed the Speed Spacer as a tool to take up space that a tire full of air would have occupied. made from high strength aluminum the Speed Spacer is not only strong, it is light and easy to install. It is sold as an individual item so you need to order (2) in order to make a set for one side of your dolly.

Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.

This is a replacement locking dolly combination mounting brackets by Collins Manufacturing. This mount accommodates your dolly, cross rail (axle), and pry bar (break-over bar).

With all of the various modular composite body sides that are coming out, finding the best solution for mounting your tow dollies is becoming increasingly difficult. This product by In the Ditch will solve that problem. This modular speed mount bolts directly to the steel wrecker body, suspending the dolly cradle over the composite side. This mount features 22" of tilt, allowing you to accommodate the angle of many composite body styles. This mount comes in a Tuff Coat Black finish, and is equipped with the vice action lock, eliminating the chance of theft. This mount is sold individually and is only compatible with the In the Ditch Speed Dollies or SLS Speed Dollies.

Note: Special Handling Fees Apply for Specific Items

The Self Loading Dolly Mounts from Collins is ideal for trucks with a higher bed height. These mounts drop down over the body side about 11" were it is then loaded and then they swing up and back to the storage position. Reduces driver fatigue and back injuries from lifting the side frames over the side of the truck bed. Please select from the dropdown the tire size of your dollies you will use with this mount.

• No more climbing up on the truck. The dollies come down to you
• Chances reduced for any back injuries and accidents, less chance for liability claims, more time on job
• Encourages dolly tows due to ease of operation; generates more revenue!
• Self Loading Dolly Mounts assists in lifting the dollies on and off the truck - the gas shock does the work!
• No more scratching and denting truck's paint, or hand rails or dollies hub caps
• Self Loading Dolly Mounts fold back into place while dollying car

Replacement Parts

• DM-BSS - Collins Ball Stud Self Loading Dolly Mount
• DM-FLS - Collins Front Latch Assembly
• DM-CLS - Collins Dollies Cup Latch for DM-SL Dolly Mount
• DM-GSS - Collins Gas Strut 20" Self Load Dolly Mount
• DM-BH - Collins Dollies Dolly Mount Hinge Bolt
• DM-LS - Collins Dollies Latch Spring
• DM-RL - Collins Dollies Rear Latch Assembly
• DM-RL-G2 - Collins Dollies Rear Latch Assembly
• DM-SLTC - Collins Dollies Dolly Tire Cradle Set of 4
• DM-TCU - Collins Dollies Dolly Tire Cradle Set
• DM-LP - Collins Dollies Lynch Pin (10 Pack)

These quality tow dolly mounts from Zip's were specifically designed to be installed on any self-loading wrecker built by Miller Industries. Select from two different item numbers to accommodate either Collins or In the Ditch branded dolly sets. Mounted on the rear slope of the wrecker body for quick and ergonomically-friendly access to the dolly, these brackets are perfect for the serious light duty towing operator. We try to make your life a little easier and safer on the road!

This Double Axle Rack from In The Ditch is perfect for those wanting to store their dolly axles and break over bear on one side of the truck. A great feature of the double axle rack is that it can be mounted on an incline; which is a big advantage when you have a wrecker with a rear sloping deck. The double axle rack comes with different mounting brackets, whether you have a flat mounting surface or a slopped deck you will have the right mounting bracket for you truck. With the AUTO-LOX system your axles easily fit in the mount and lock into place. The mounts are pre-drilled, lockable and come in a tuff coat black finish. We also offer a

This Axle Slide Tunnel Box Mount from In The Ditch has become a best seller. This mount is easy to install and easy to use; just bolt the mount to the top of your tunnel box. Axles have a tab factory installed that fits the slot in the mount. All you do is start the axle into the mount, push across, and your axle automatically locks into place. This mount will hold two axles and one break over bar. Shop for your

These Safety Tie-Down Straps are hook style with ratchet buckles. These are designed for SLX and SLZ Hi-Speed Dollies. These are the replacements for the lasso style tie-down straps (P/N: DF-TDS).

Maximize your dolly towing capabilities with these dolly tow cradles from Collins. When towing a vehicle with missing wheels these tow cradles are a must. Easy to use with a lightweight, heavy duty aluminum construction. Sold as a pair.

When you come across a wreck, you should be able to get that car where it needs to be, even when all you have is a wrecker. If you're on the interstate, this can be difficult as not many dollies aren't capable of handling interstate travel. Lucky for you, Collins has the Pro Line Hi-Speed Dolly to help you.

In The Ditch's Locking Short Simple Mount is a great low cost way to hold your Speed Dollies. This mount is the same as the Short Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Sold as Each.

The Tilt-N-Slide under-body slide out Dolly storage mount from In The Ditch was designed to be low, fast and easy to use. One of the things drivers like about this Dolly mount is that the Dolly can be slid out and serviced without taking it out of the mount. Another feature is that it puts the Dolly in the perfect ergonomic position for the driver to lift up. This mount also has a pre-installed Vice Action Lock installed. The Tilt-N-Slide is made from steel and comes with a black finish.

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your light duty wrecker. These are made specifically for Vulcan 810, 812, and Century 312 Wreckers.

This Integrated Speed Mount from In The Ditch is similar to the Speed Mount except it has an Integrated Mount that can hold a break over-bar and aluminum axle. Locking the axle, break over bar and Speed Dolly is all done with the built in Vice Action Lock. There is a reason this is a top seller, its ease of use keeping the dolly frame, axle and break over bar in one spot. Made from steel with a Tuff Coat Finish you will get years of dependable service. We also offer regular

This Single Axle Rack was designed for those wanting to mount a dolly axle on each side of the truck. Each rack will hold a telescoping aluminum axle and break over bar. They are sold as a set, which contains two single axle racks and one thumb screw to hold down the break over bar. This In the Ditch's AUTO-LOX system, the axle easily fits in the mount and locks into place with just a twist. Mounts are pre-drilled, lockable and come in a tuff coat black finish. We also offer a

Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.

This is a replacement compression latch with lock for drop down dolly boxes by In The Ditch. This latch comes with a chrome finish.

This Dolly Support Arm is a handy accessory for the ITD-MODULAR-MOUNTS by In the Ditch. Now you can have the choice of mounting your dolly axle parallel with the wrecker deck if you want. This support arm comes painted Tuff Coat Black and is made in the USA.

This Dolly Speed Mount from In The Ditch is a great choice for those who want their dollies on the deck. It was designed with large contact pads for the dolly wheels to rest on, so no more driving down the road watching your dollies shake in the mount. Removing the dollies is easy, just lean it towards you and they come right out of the mount. This speed mount also has a built in Vice Action Lock to keep your Dolly safe and sound. Installation is fast and easy because of the pre-drilled mounting holes.

These In The Ditch Drop Down Dolly Boxes will save your back from heavy lifting off the deck. The drop down dolly box is weather resistant and protects your dollies from snow, ice and road debris. They are easy to use, just pull the aluminum tray out and tilt the tray down. The Standard Single Box was specifically designed to hold the Speed Dolly with 4.80 tires perfectly keeping the hubs and valve stems facing up for easy servicing while in the box. The XD Single Box was specifically designed to hold the XD Speed Dolly with 5.70 tires perfectly keeping the hubs and valve stems facing up for easy servicing while in the box. New composite bearings for the sliding/tilting tray were designed to last for years. We also offer a

Keep the axles for your tow dollies protected and out of the way so they don't get damaged by installing this welded steel axle mount inside your wrecker's crossover tunnel box. This powder-coated rack bolts to the top of your tunnel to preserve valuable floor space inside your toolbox. The mount locks the axles in place to prevent shifting and sliding during transit. Besides the axles, the rack also holds a dolly's breakover bar for easy access once those components are needed.

Collins is super excited to introduce the new Collins Hi-Speed G7X Dolly. The G7X was initially designed specifically for Canadian tow operators. Dollies have been getting lighter; Canadian tow operators asked for a heavier duty dolly, built for the harsh winters, ice and snow, and off-road use of rural Canada.

The Carrier Double Dolly Mount bolts securely onto the frame of your Car Carrier, just like our popular Quick Mounts for toolboxes. This new mount is designed to carry both side frames of the In The Ditch® Dollies with ease and security.

Give the wheels on your tow dollies a place to rest on the deck of your light-duty wrecker with this pair of aluminum tire stands from Zip's. This replacement part works with the Zip's Lift Assist Dolly Mount (Item # ZP-DM-SL) and is the only adjustable tire mount available on the market. The top plate on these two-piece brackets is contoured to the shape of the tire, and both stands are mounted to the surface of the deck. Each side of the cradle is slotted for adjustability. Simply loosen the four bolts and slide the bracket to the desired height.

This is a replacement plastic pull handle for the drop down dolly box by In The Ditch.

The Parallel motion Dolly Mount from Collins is ideal for trucks with a lower bed height. The PM-DM is designed to be loaded on the outside of the truck bed and then swings up and back to the storage position. Reduces driver fatigue and back injuries from lifting the side frames over the side of the truck bed.

Introducing In The Ditch Speed® Dolly Fender Set—the first-ever fender system made for tow dollies. Not just new to In The Ditch®—new to the tow industry.

For years, tow pros have dealt with road debris, flying gravel, and blown tires chewing up cars in tow. Now, there’s finally a solution. This steel-built shield bolts straight to your dolly and takes the hit—so the customer’s car doesn’t.

The Speed® Dolly Fender Set is engineered to mount directly to all In The Ditch® Speed® Dolly models (past and present) and can be installed in minutes using standard pins and hardware. Available in both steel and upgraded aluminum versions, the fender set offers towing professionals the option to choose between rugged strength and lightweight performance—both providing an industry-first solution to a long-standing problem.

• ITD-25148: In The Ditch Speed® Dolly Fender Steel Set
• ITD-25478:In The Ditch Speed® Dolly Fender Aluminum Set
• The Dolly Fender Mount provides a secure and convenient solution for storing your dolly fenders when not in use
• ITD has developed a bracket if you have 2" dollies, ITD-2ADAPTER choose from steel or aluminum
• Standard reflectors boost visibility. The top platform’s ready for wireless tow lights
• But most importantly? It helps cut down damage claims—and that means fewer headaches and lower insurance premiums
• It’s not flashy. It’s just smart. Strong. And long overdue.


For ITD dolly owners you will need the Following:
• ITD-DOLLYFENDER: QTY 1
• ITD-25410: QTY 2


For other dolly brands you will need the follwing:
• ITD-DOLLYFENDER: QTY 1
• ITD-25410: QTY 2
• ITD-2ADAPTER: QTY 2
• ITD-25463: QTY 2


In The Ditch Dolly Fender Mount - #ITD-25410
In The Ditch Dolly Fender Mount 2in Frame Adapter - #ITD-25463
In The Ditch Dolly Fender 2in Adapter Bracket - #ITD-2ADAPTER

Zip's Retaining Plate can be used for ZP-DM-810-ITD, ZP-DM-408-ITD and ZP-DM-810

Equip your Holmes TSV towing and service truck with this towing accessory kit. This all -inclusive kit provides everything you need to properly tow most autos down the road. It includes Collins zinc-plated tow dollies with aluminum axles, auto-positioning dollies from Go-Jak, and a Towmate wireless towlight. Also included are mounting brackets specifically designed for all the accessories to be efficiently stored on the Holmes TSV.

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your Vulcan 892 light duty wrecker. These storage brackets include 2 pieces, enough to hold 2 dolly axles on your wrecker.

• Sold as a Set of 4

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your Chevron 408 light duty wrecker.

Optimize your wrecker’s efficiency with the Collins Dolly Bunks—an underbody dolly storage solution designed to enhance safety, accessibility and organization. Engineered from high-strength, corrosion-resistant aluminum, these heavy-duty bunks are built for long-lasting performance in demanding environments.

• Sold as a Set of 2

Zip's Custom dolly tray for car carrier. This dolly tray is for 5.70 dollies. This custom dolly tray allows you to store your dollies out of the way while still being able to have easy access to the dollies.

Note: Special Handling Fees Apply   Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy  

Keep the axles for your tow dollies protected and out of the way so they don't get damaged by installing this welded steel axle mount inside your wrecker's crossover tunnel box. This powder-coated rack bolts to the top of your tunnel to preserve valuable floor space inside your toolbox. The mount locks the axles in place to prevent shifting and sliding during transit. Besides the axles, the rack also holds a dolly's breakover bar for easy access once those components are needed.

• Holds two axles, one breakover bar
• Bolts inside tunnel box at top
• Welded construction
• Powder-coated black
• Easy access to equipment
• Components stay locked down
• Prevents shifting during transit
• Dimensions: 64" L x 10" W x 2 1/2" H
• Mounting Point to mounting point: 8 1/2"
• Size of holes 3/4"

These are the axles for the dolly kits.

Upgrade your dolly setup with the Dolly Fender 2" Adapter Bracket, designed to deliver seamless compatibility and rugged performance. This essential accessory allows you to mount our latest dolly fenders on dollies equipped with 2-inch tubes—expanding versatility without compromising durability.

Upgrade your Speed Dolly Fender setup with the Dolly Fender Mount 2" Frame Adapter the perfect solution for securely mounting fenders to a 2" dolly frame. Engineered for durability and ease of installation, this adapter kit is built to handle the rigors of the road while maintaining a clean, professional look.

The Dolly Fender Mount from In The Ditch® is the smart, secure way to store your fenders right on your tow truck—exactly where you need them, when you need them. Designed with working professionals in mind, this mount gives you quick access to your fenders while keeping your truck bed clean and organized. Built from heavy-duty steel and finished with our Endurance Powder Coat for maximum corrosion resistance, this mount is made to withstand the harsh conditions of daily towing—rain, road grime, and all. It’s designed to bolt directly to your truck or service body, so your Speed® Dolly Fenders stay secure, even on rough roads and recovery scenes.

Expand your towing capabilities with the innovative Ball Joint Cradle, an essential accessory for the Tow Cradle. This specialized attachment provides crucial support for vehicles with broken ball joints—a stressful event for any towing customer.