Paint and Body Supply

Tow like a pro with the 42.3" long Compact Single Piece HD Tow Ramp! You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it's safe in your hands too. The 1 inch by 5 inch notch in this Tow Ramp enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car. This compact ramp gives 4.5 inches of lift and has a 5.2-degree angle of approach. It is designed for tires up to 8 inches wide, and it can support up to 2,500 pounds for a total vehicle weight capacity of 10,000 pounds.

The Fast Puller Rubber Vacuum Replacement Gasket Kit is a rubber seal that offers a peel-and-stick application to the bottom of the Fast Puller base for a solid connection to the floor surface while under operation. Conforming to surface imperfections, the rubber material ensures flexibility, durability and a reliable connection to the floor during Fast Puller setup.

The Fast Puller Multi-Hook works with the Fast Puller dent-removal system from GUNI Wheel. This aluminum accessory is a versatile and precise "claw-looking" device that follows the contour of dents, providing efficient and effective attachment and pulling capabilities when used with a wiggle wire or Keco glue system.

Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 27.5-inch long hook-nose Rack Ramps or our 40-inch long hook-nose Rack Ramps. They have an 8.6-degree approach angle and come with a 3-inch cutout/lip bridge. The 14-inch width works with tires up to 12 inches wide. Each rack ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The 4" H provide 4 inches of lift height. The 5" H provide 6 inches of lift height, which flattens out to 5 inches high along the lip bridge.

Mississippi Welders depressed center fast grinding wheel. It has an aluminum oxide grain with a soft bond for fast shock removal. It is used for ferrous metals (iron, steel, welds, etc.) and low grade stainless steel.

The Fast Puller by GUNI Wheel is a professional grade dent-removal tool designed to save time, improve efficiency and increase safety for auto body technicians and auto repair shops. The portable aluminum puller weighs just 45 pounds and can be easily wheeled from vehicle to vehicle to provide on-demand pulling capacity with little advanced setup.

GUNI Fast Puller muffler For D10 Tube

GUNI Fast Puller Vacuum Ejector D8-D10-D10

GUNI Fast Puller D8 M 3/8" Male Connector

GUNI Fast Puller D17 Washer

GUNI Fast Puller Drill Tip Screw 3.5 x 9.5

GUNI Fast Puller Tube Cover

GUNI Fast Puller Pulley Inner Bushing (2 Parts)

GUNI Fast Puller 6 x 16 MM screw (Washer)

GUNI Fast Puller round metal rod union sleeve - M 6 x 20

GUNI Fast Puller Spacer Sleeve Dint 10 x dext, 16 x 16H

GUNI Fast Puller Hexagonal Screw Zinc Plated With Washer Din 6921 M10 x 20- All Threaded

GUNI Fast Puller Pulley

GUNI Fast Puller Aluminium Pipe 100 x 50 x 3 (1700 Mm)

GUNI Fast Puller Base

GUNI Fast Puller Allen Screw 7380-2 (Washer) 8X20 Zinc Plated

GUNI Fast Puller Locking Nut- Din 985 M-8 Zinc Plated

GUNI Fast Puller screw 12-9 M M 10 x 80

GUNI Fast Puller precision puller kit for Mini-Pull Pro.

GUNI Fast Puller zinc plated hexagon head cap screw - Din 933 M8 x 60