Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This 12 volt air compressor is a great way to prevent having to return home early from riding a dirt bike in your favorite remote location simply because you have a flat tire. Our 12 volt compressor can be a very useful tool for tire inflation, operating air tools, or many other camping, off-roading, or racing purposes. Can easily be stored in your toolbox, camper, or four-wheeler trailer.
Note: Special Handling Fees Apply for Specific Items
All units include air filter, low-voltage cutoff circuit board, 4-ga. power cable, oil, mounting studs and nuts. Optional accessory kit includes pressure switch, tee fitting, street elbow, quick disconnect coupler, hex nipple and dust cap.
Continuous-duty models feature a forced-air motor and compressor-cooling system for continued use
Oasis Manufacturing carries a variety of 1/4 of an inch NPT air fittings, all with dimensional compatibility with other NPT threaded fittings. Our fittings can be use to fit a threaded hole in an air cylinder, actuator, air tool handle, valve, and more. Our current selection includes adjustable pressure switches, open super chucks, male and female NPT couplers and plugs, tank and safety valves, tank gauges, and a 25-foot urethane hose. This 12-volt adjustable air pressure switch also features an adjustable set screw, allowing you to fine-tune your compressor’s on and off pressure from 100-250 PSI in 30-40 PSI increments
Note: Special Handling Fees Apply for Specific Items
Phoenix's 12 volt portable air compressor kit includes a 25' hose reel and a 12 volt portable air compressor 3 gallon tank with an.75 HP motor. With additional features including a 25' retractable hose reel kit, the choice of the standard air hose reel or a premium air hose reel and 50 amp circuit breaker, this multi-functional piece of equipment will be the answer to all your needs. Total dimensions after being assembled are 22.75" x 19.5" x 17".
This is a 12 volt permanent mount air compressor by Voltair. It is a heavy duty cast iron twin cylinder, oil lubed compressor that runs at 470 RPM. It also has a 1 HP motor that has a 90 amp draw at 100 PSI. This compress will fill a 10 gallon tank from 0 - 150 PSI in 2 minutes and 55 seconds. It will recover a 10 gallon tank from 130 - 150 PSI in 35 seconds. The motor has a 2000 hour life. The dimensions of this product are 19" H x 18.25" W x 8.25" D. This air compressor weighs 110 lbs.
Vanair rotary screw oil is a unique, fully synthetic fluid designed to allow for easier cold weather operation and warm-up, while providing exceptional lubrication during hot weather or severe service. Vanguard is designed with special components to control fluid oxidation, limit fluid loss from vaporization, minimize wear, prevent rust and corrosion, effectively seal rotors, and keep the compressor clean.
Viair 88P is a newly-designed, powerful portable tire inflator, capable of inflating up to 33-inch tires. Attach the heavy duty battery clamps to your vehicle s battery, and start the engine. Connect to a tire valve stem and turn the unit on. Tire pressure can easily be checked using the gauge incorporated into the top of the unit.
The Lightest, Most Compact Rotary Screw Air Compressor and ALL-IN-ONE Hydraulically Driven Power System on the Market. Providing 300 amps of welding power, 40 cfm of on-demand air, 110/240 Volt Electrical, and 12/24 Volt Charge and Jump Starting. The Vanair Air N Arc 300 is compact enough to fit a truck's side-pack or be mounted behind the cab. The totally self-contained unit delivers more efficient use of truck space and can be integrated with the chassis for maximum versatility. Featuring the market's only remote panel for a diesel ALL-IN-ONE Power System, it provides ultimate user convenience and safety. Designed for maximum fuel efficiency, the system offers the power you need for all your mobile workshop needs. Available in Gas, Diesel and Hydraulically Drive
Dual-performance value-pack air systems furnish you with not one, but two identical air compressors for your garage, business, or vehicle. These units have countless uses, and are ideal for low-rider cars or trucks with an air suspension system. The versatile 12V compressors can operate on their own, or connected to an air tank (10 gallons max). For some applications, you may want both compressors running off the same tank. The head assembly features a newly-developed intercooler for more efficiency.
Oasis Air Compressors have been developed, tested and proven to be the fastest...most powerful 12v/24v DC air compressors available today. They are built to meet the most rugged requirements for service trucks and contractors. The high performance of these compressors is attributed to the use of 5 HP "TM" winch type motors directly coupled to 10 c.i. twin cylinder York compressors.
This is a 24" wide tunnel toolbox by Zip's Truck Equipment. It is constructed
from aluminum and is powder-coated oxford white. This toolbox is commonly used
on Zip's Battery Service trucks.
Flexzilla Air Compressors are the quietest on the market, emitting operating noise no louder than a normal conversation. The Air compressors are electric offering low RMP twin-cylinder pumps and motors that reduce high-frequency noise levels. Max 125 PSI and CFM @90 PSI.
Oasis's tank-mounted DC air compressors are designed for both commercial and industrial use. They offer two types of tank-mounted DC air compressors: The XDT10-3000 which comes equipped with the XD3000 air compressor model and the new XDT-4000 which comes equipped with the latest XD4000 air compressor model. Both DC air compressors are mounted on a 10 gallon ASME coded tank. These tank-mounted DC air compressor packages are designed for both work truck and tow truck applications.
These air tanks can be mounted out of the way, such as under the vehicle of under a tool box, with only an air hose connecting the compressor. Available in 8-gal. or 12-gal. sizes.
It features horizontal cooling fins and a trapezoidal head design, a standard 3/8" stainless steel braided leader hose with 3/8" NPT inline check valve and insulated wiring.
Viair's Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.
This system is ideal for powering air tools and suspension systems, and filling tires. The easy-to-install wiring harness and manifold make wiring and plumbing the system straightforward. System includes: (1) 60A fuse & fuse holder (1) 80A relay (2) 1/4"BSP adapters for air lockers (1) T-fitting 1/4" NPT Female x 1/4" NPT Female x 1/4" NPT Male (1) 1/8" to 1/4" NPT reducer (1) Wiring harness with Delphi connections (2) Delphi connector plug kits (1) Billet 1/4" NPT x 6-port manifold and mounting bracket (1) Air filter housing with installed element (2) Replacement air filter elements (1) Dash panel air pressure gauge (1) Air pressure regulator (0-200 psi) (1) 15' DOT air line.
This on-board air system components package includes all the components you'll need to set up an on-board system in an accessible location, such as a truck bed or rear deck. Features include everything you'll need to connect a coil base directly to the compressor to get you up and running: an Oasis tire gage, adjustable power switch, urethane coil hose, several couplers, and all fittings, wire, and terminals.
Get a compressor that's built tough and keeps its cool. Fleetrite A/C compressors from International and IC Bus feature larger main shaft bearings, stainless reed valves and stronger thrust bearings.All compressors are: designed to replace common industry models, tested to original manufacturer specs, cover a wide range of International and all-makes applications, and are International and IC Bus aftermarket quality approved.