Replacement Pins | Precision Pivot Components

Sort by

Miller Roll Pin 1/4" x 1 3/4"

This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.

$0.29

Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan

This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models. To view specific models see Features below. To view part schematics click on the Brochures tab.

$93.99

Miller Fold Cylinder Pin Weldment Base End Century / Challenger

This is a replacement base end fold cylinder pin weldment for Century and Challenger heavy duty wreckers by Miller Industries. This is the pin that attaches the base end of the fold cylinder to the underlift tower weldment of the wrecker. This pin fits the Century 1624, 5130/5230, 7035, 9055, the Century CH-32, CH-35, and the CH-45 wreckers. This part can be used to replace Part Number 12-0802220.

$140.99

Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"

This is the rear extend cylinder pin for many light duty wreckers by Miller Industries. This pin will work with most Century, Challenger, Champion, Holmes and Vulcan light duty wreckers. This pin measure 6" long with a diamter of 7/8". To view specific wrecker models this pin fits see Features below.

$31.49

Miller Wheel Lift Extend Cylinder Shaft Base End LCG Carriers

This is a replacement wheel lift extend cylinder shaft on LCG car carriers by Miller Industries. This is the shaft attaches the base end of the cylinder to the wheel lift outer boom weldment. To view specific models see Features below. To view the part schematics see the Brochure tab.

$29.39

Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan

This is the front extend cylinder pin for the wheel lift extend cylinder on Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To view what models this pin fits on please see Features below. To view part schematics click on the Brochures tab.

$43.19

Jerr-Dan Pin Weldment 1.246/1.247 DIA X5

$59.99

Miller Fold Cylinder Lower Pin Century Midnight Express / Vulcan 807

This is the fold cylinder lower pin on the wrecker boom of the Century Midnight Express and Vulcan 807 by Miller Industries. See Brochures for reference chart and Features for related parts.

$115.99

Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan

This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300 Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to connect the swing L-arm cylinder to the swing L-arm. To see which specific models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$11.09

Miller Boom Lift Lower Cylinder Pin Century Wreckers

This is a replacement boom lift cylinder lower pin for the Century 1130/1140, 7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$301.99

Miller Boom Lift Cylinder Pin Century 3212 HD Wrecker

This is a replacement boom lift cylinder pin for the Century 3212 heavy duty integrated wrecker by Miller Industries. This pin attaches the lift cylinder to the main recovery boom outer weldment. To view the part schematics, see the Brochure tab.

$99.99

Miller Wheel Lift Extend Cylinder Shaft Rod End LCG Carriers

This is a replacement wheel lift extend cylinder shaft on LCG car carriers by Miller Industries. This is the shaft attaches the rod end of the cylinder to the wheel lift inner boom weldment. To view specific models see Features below. To view the part schematics see the Brochure tab.

$43.09

Miller Wheel Lift Tilt Cylinder Upper Pin Century Holmes Vulcan

This is the Upper Pin for the Wheel Lift Tilt Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin is used to connect the tilt cylinder to the subframe assembly. To view the specific wrecker models see Features below. To view part schematics click on the Brochures tab.

$68.99

Miller Base End Boom Lift Cylinder Pin Holmes Vulcan

This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.

$71.99

Miller Wheel Lift Upper Arm Boom Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the outer boom weldment of the wheel lift. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$65.99

Miller Fold Cylinder Upper Pin Century Vulcan

This is the Fold Cylinder Upper Pin for the base end of the cylinder on Century Modular 211, Vulcan Modular 804, Modular 806 and Modular 807 light duty wreckers by Miller Industries. This is the pin that connects the fold cylinder to the boom of the wrecker. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$97.99

Miller Base End Wheel Lift Tilt Cylinder Pin Vulcan 810 Power Tilt

This is the Wheel Lift Tilt Cylinder Pin for the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.

$216.99

Miller Pin - Multi-Position

This is a multi-position pin.

$242.99

Miller Boom Extend Cylinder Pin Century Challenger Holmes Vulcan

This Extend Cylinder Outer Boom Shaft from Miller Industries is used on many different assemblies on Century, Challenger, Holmes, and Vulcan Wreckers. These assemblies include boom, front outrigger, and wrecker assemblies. Please view the brochures tab to see a full list of wrecker assemblies and parts schematics.

$58.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 810 Intruder

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 810 Intruder light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the wheel lift tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$85.99

Miller Lower Parrallel Arm Pin 411 / 412

This is the weldment pin that connects the outer stinger to the parallel arms on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.

$218.99

Miller Rear Wheel Lift Extend Cylinder Pin Vulcan 800 Series

This is the Wheel Lift Extend Cylinder Rear Pin for the Vulcan 800 Series light duty wreckers by Miller Industries. This includes the 880 / 890 Series, Modular 880 / 890 Series and the 896 / 897 Series. This pin is used to connect the wheel lift extend cylinder to the wheel lift inner boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

$69.99

Miller Stinger Pivot Pin Century 300 Series / 211 / 212

This is the stinger pivot pin on the wrecker boom of the Century 211/212/300 Series by Miller Industries. See Brochures for reference chart and Features for related parts.

$86.99

Miller Boom Extend Cylinder Front Pin Century Challenger and Vulcan HD Wreckers

This is a replacement boom extend cylinder front pin on the Century 5130/5230, Challenger CH-32 and Vulcan V-50 heavy duty integrated wreckers by Miller Industries. This pin goes through the base end of the cylinder. It is the pin that connects the boom extend cylinder to the outer boom weldment. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$89.99

Miller Lower Tilt and Lift Cylinder Pin Vulcan 800 Series

This is the Wheel Lift Tilt Cylinder Lower Pin on the Vulcan 880 / 890 Series and the Vulcan 896 / 897 Series light duty wreckers by Miller Industries. This pin is also used to attach the wrecker boom lift cylinder to the subframe weldment on the Vulcan 896 / 897 Series wrecker. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$123.99

Miller Extend Cylinder Pivot Pin Century Challenger Eagle Holmes Vulcan

This is a pivot pin for the Boom Extend Cylinder on many Miller Industries Light Duty Wreckers. This pin fits the Century 300 Express Series, Century Formula 6000 - 600 Series, Century Formula 6500 - 600 Series, Century Modular 400 & 600, Challenger 4300 Express Series, Challenger 4700 Series, Challenger 4800 Series, Eagle EB-3 Series, Holmes 440 Series, Holmes HP 552 & DFT 650, Vulcan Modular 806, 807, 880/890 wreckers. See Features below to view models this pin fits. To view part schematics click on the Brochures tab.

$75.99

Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes

This is a Pin that is used in different locations on the Wheel Lift of Century Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty wreckers by Miller Industries. This pin is used to hold the tilt cylinders on to the wheel lift frame weldment. This pin also is used to attach the upper arm weldments to the wheel lift frame weldment also. To view part schematics click on the Brochure tab.

$99.99

Jerr Dan Wheel Lift Pivot Pin - Greaseless

Wheel Lift Pivot Pin for Jerr Dan Wreckers With Greaseless Pins That Have Manual L-Arms.

$246.99

Miller Wheel Lift Tilt Cylinder Upper Pin Century Vulcan

This is the Wheel Lift Tilt Cylinder Upper Pin on the Wheel Lift of a Century Modular 400 & 600 Series, Vulcan 880/890, Vulcan Modular 880/890 and the Vulcan 896/897 Series light duty wreckers by Miller Industries. This pin connects the wheel lift's tilt cylinder to the wheel lift frame weldment. To view which wrecker models this pin fits please see Features below. To view part schematics click on the Brochure tab.

$76.99

Miller Wheel Lift Tilt Cylinder Pin Century Modular 400 and 600

This is a Wheel Lift Tilt Cylinder Pin for the Formula I Wheel Lift Assembly on the Century Modular 400 & 600 Series light duty wrecker by Miller Industries. This pin is used to connect the tilt cylinder to the outer boom stinger weldment of the wheel lift. To view the part schematic click on the Brochure tab.

$81.99

Miller Rod End Boom Lift Cylinder Pin Vulcan 805 / 806 / 807 / 810

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$93.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Century

This is the Lift Cylinder Pin on the Wheel Lift for Century Formula 6500 - 600 Series and Century Modular 400 & 600 Light Duty Wreckers by Miller Industries. This is the pin for the rod end of the lift cylinder. To view specific models this pin will fit see Features below. To view part schematics click the Brochure tab.

$144.99

Miller Boom Lift Cylinder Upper Pivot Pin Century and Challenger HD Wreckers

This is a replacement boom lift cylinder upper pivot pin for the Century 7035, 9055, Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$242.99

Miller Front Wheel Lift Extend Cylinder Pin Vulcan 880 / 890 Series

This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This pin is used to connect the wheel lift extend cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

$32.39

Miller Wheel Lift Extend Cylinder Rod Pin Century

This is the Wheel Lift Extend Cylinder Pin for the Century Modular 400 & 600 Series and the 614 Formula IIT light duty wreckers by Miller Industries. This pin is for the rod end of the extend cylinder. To see which wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$65.99

Miller Boom Lift Cylinder Base Pin Century Vulcan

This is the Boom Lift Cylinder Base Pin on the Century Modular 211, Vulcan Modular 804 and Vulcan Modular 806 light duty wreckers by Miller Industries. This pin connects the Boom Lift Cylinder to the subframe assembly. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab.

$60.99

Miller Lower Wheel Lift Cylinder Pin Vulcan 880 / 890 Series

This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This is the lower pin and it goes through the rod end of the cylinder. This cylinder connects the lift cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$82.99

Miller Pin Weldment Lower Lift Cylinder

This is a lower lift cylinder pin weldment from Miller Industries.

$113.99

Miller Boom Extend Cylinder Front Pin Century 3212 and Vulcan V30

This is a replacement boom extend cylinder pin for the Century 3212 and Vulcan V30 heavy duty integrated wreckers by Miller Industries. This pin is used on the base end of the cylinder and attaches the boom extend cylinder to the outer boom weldment. This is the boom extend cylinder pin that is towards the front of the wrecker. To view the models this wrecker fits, see Features below. To view the part schematics, see the Brochure tab.

$223.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 812 and 810

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 812 Intruder and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$91.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Challenger 4800 Series

This is the Wheel Lift Tilt Cylinder Pin for the I-600 Wheel Lift on the Challenger 4800 Series light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin connects the tilt cylinder to the outer wheel lift boom weldment. To view the part schematic click on the Brochure tab.

$36.49

Miller Boom Extend Cylinder Pin Vulcan 880 / 890 / 806

This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 880 / 890 Series and the Vulcan 806 Series light duty wreckers by Miller Industries. This pin is used to secure the boom extend cylinder to the inner wrecker boom weldment. To view the part schematic click on the Brochure tab.

$43.19

Miller Fold Cylinder Base Pin Century Midnight Express

This is a Fold Cylinder Pin for the Wheel Lift of a Century Midnight Express by Miller Industries. This is the base end pin which is connected to the tower/boom. This pin is used with fold cylinder part number, 12-0715886. To view the part schematic click the Brochure tab.

$85.99

Miller Boom Lift Cylinder Pin Century 3212 and Vulcan V-30 HD Wreckers

This is a replacement boom lift cylinder pin for the Century 3212 and the Vulcan V-30 heavy duty wreckers by Miller Industries. This pin is used for the upper and lower lift cylinder pin. This pin connects the lift cylinder to the subframe and the outer boom weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$106.99

Miller Boom Lift Lower Cylinder Pin Century and Challenger HD Wreckers

This is a replacement boom lift cylinder lower pin on Century and Challenger Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the base end of the cylinder and attaches the lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$202.99

Miller Removable Rail Lynch Pin 7/16"

This Miller Industries part is a 7/16" lynch pin for connecting removable rails. It is also used in various other areas.

$5.99

Miller Cotter Pin 1/8" x 1 1/4"

This Cotter Pin from Miller Industries is used on the Winch Clutch Control of 4-Ton Hydraulic Winches,

$6.89

Miller Upper Wheel Lift Cylinder Pin Vulcan 880 / 890 Series

This is the Upper Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This is the upper pin and it goes through the base end of the cylinder. This cylinder connects the lift cylinder to the wheel lift tilt column weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$43.19

Miller Boom Lift Cylinder Pin Century Formula 6500

This is the boom lift cylinder mounting pin for the lift cylinder on the Century Formula 6500 - 600 Series light duty wrecker by Miller Industries. The cylinder that uses this mounting pin is part number 12-0302357. To view the part schematic click the Brochure tab.

$52.99

Miller Fold Cylinder Rod Pin Century Midnight Express

This is a Fold Cylinder Pin for the Wheel Lift of a Century Midnight Express by Miller Industries. This is the rod end pin which is connected to the wheel lift. This pin is used with fold cylinder part number, 12-0715886. To view the part schematic click the Brochure tab.

$119.99

Miller Boom Lift Cylinder Pin Base End Century / Challenger

This is a replacement boom lift cylinder pin. This is the pin that goes into the base end of the cylinder to attach the cylinder to the wrecker's subframe weldment. This pin fits Century 1624, 3224, 4024, Challenger Ch-16 and Ch-20 Medium Duty Wreckers by Miller Industries. To view specific models this pin fits see Features below. To view the part schematics, see the Brochure tab.

$140.99

Miller Base End Boom Lift Cylinder Pin Century 614 Series

This is the Boom Lift Cylinder Pivot Pin for Century 614 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the wrecker frame weldment allowing the cylinder to pivot as the boom goes up and down. To see which models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$159.99

Miller Boom Extend Cylinder Front Pin Century 4024

This is a replacement boom extend cylinder front pin for the Century 4024 heavy duty integrated wrecker by Miller Industries. This pin goes through the base end of the cylinder. This pin attaches the extend cylinder to the main recovery boom outer weldment. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$22.99

Miller Lift Cylinder Lower Pin Century

This is the Lower Cylinder Pin on the Lift Cylinder on Century Formula I Duplex Tilt 411 & 412 wreckers. This pin also fit the Century Formula 6000 - 600 Series wrecker. To view part schematics click on the Brochures tab.

$78.99

Miller Fold Cylinder Lower Pin Century Vulcan

This is the Fold Cylinder Lower Pin for the rod end of the Cylinder on Century Modular 211, Vulcan Modular 804 and Modular 806 light duty wreckers by Miller Industries. This is the pin that connects the fold cylinder to the wheel lift of the wrecker. To see which specific wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$90.99

Miller Boom Lift Cylinder Pin Rod End Century / Challenger

This is a replacement boom lift cylinder rod end pin for Century and Challenger medium duty wreckers by Miller Industries. This pin attaches the boom lift cylinder to the man recovery boom outer weldment. To view the specific models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$169.99

Miller Boom Lift Upper Cylinder Pin Century and Challenger HD Wreckers

This is a replacement boom lift cylinder upper pin on Century and Challenger Heavy Duty Integrated Wreckers by Miller Industries. This pin goes through the rode end of the cylinder and attaches the lift cylinder to the main recovery boom outer weldment of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$205.99

Miller Roll Pin, 3/16" x 1-3/4", Century Wreckers

This 3/16" x 1-3/4" Roll Pin from Miller Industries is used on the Subframe Assembly of several Miller Century and Challenger Wreckers. When used a roll pin it is recommended that the hole size be the same as the diameter of the pin, 3/16" in this case. Please see the features below for a list of trucks and see the brochure tab for breakdowns.

$2.89

Miller Boom Lift Cylinder Lower Pin Century Vulcan

This is the Boom Lift Cylinder Lower Pin for a Century 400 & 600, Vulcan 880/890 and Vulcan Modular 880/890 light duty wrecker by Miller Industries. This pin connects the lift cylinder to the subframe for the wrecker. To see which specific wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

$52.99

Miller Pivot Pin

Miller Pivot Pin W/L D/S A/G 10S.

$124.99

1 - 60 of 133 items