Outer Crosstubes | Wrecker & Rollback Parts

Sort by

All-Grip Chevron Style T Handle Pin

This is a Chevron T-handle pin. Choose from three size options: 5/8" X 3" reach, 3/4" X 3-1/2" reach, & 3/4" X 3" reach

$35.99 – $75.99

B/A Products T Handle Pin 5/8"

This 5/8" diameter Pin comes with a t-handle and release button. It's for Chevron L-Arm and fits Chevron 408 and Car Carrier wheel grids.

$64.99

Miller Replacement L-Arm Pin Assembly

Replacement pivot lock pin with attachment cable for Century new style "Pivot-L" wheel grids. This part can be used to replace Part Numbers: 12-0714415 and 12-0904140.

$17.89

Century / Champion / Vulcan / LCG Right Crosstube 3.5"

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete right hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the left hand version of this Cross Tube,

$463.99

Century / Champion / Vulcan / LCG Left 3.5"

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube from Miller Industries is a complete left hand assembly with cam lock style plunger pins. This cross tube will fit 3.5" x 3.5" square tubes. It is used on the wheel lift and slide-in tire restraint assembly of Century, Champion, and Vulcan Car Carriers. Shop for the right hand version of this Cross Tube,

$463.99

Vulcan Front Crosstube 3.5" Stop Pin Assembly

This is a front stop pin assembly for the scoop bracket weldment on Light Duty Vulcan Wreckers by Miller Industries. This stop pin w ill fit the following models: Vulcan Modular 804, Modular 806, and Modular 880/890. It works for both sides of the wrecker. This par t can be used to replace Part Numbers: 8621400 and 880411500.

$43.09

Zip's Locking Pin Weldment w/ Chain

This is a Lock Pin Weldment with chain that is used on Vulcan Wreckers. It is used on the crossbar assembly with the wheel retainers. It locks the wheel retainer into the crosstube. This part can be used to replace Part Number, 9046566.

$15.61

Vulcan 890 Right Wheel Grid

Note: Special Handling Fees Apply

Wheel Grid assembly, right hand, fits Vulcan 850 & 890 wheel lifts. Uses 8501000 l-arm. This part can be used to replace Part Number, 8500500.

Fits on 4" x 4" square tube
Vulcan patented strapless system
6,000lbs lift rating

$557.99

Century Wheel Lift Outer Tube Pad Shim Holmes / Vulcan

This is the outer tube shim pad for the side, inside of the wheel lift by Miller Industries. This Shim Pad will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 400 & 600 Series, Holmes 440SL, Vulcan Modular 806, Modular 807, 812 Intruder, and Modular 880/890. See Brochures for reference chart and Features for related hardware. Each pad sold separately.

$6.89

Century Style 3" Crosstube Wheel Grid - Passenger Side

Note: Special Handling Fees Apply

This Century style wheel grid features a T-handle screw-in style plunger pin to hold the Century style L-arm wheel retainer in place. This crosstube is designed to fit on a 3" x 3" wheel lift crossbar. Fits: Century and Champion 10 Series Car Carriers by Miller.

Dimensions: 25 1/2" x 3 3/4" x 8
Shop for the left hand version of this Outer Cross Tube, 12-0905094

Fits:
Century 10 Series Carriers
Champion 10 Series Carriers

$575.99

Century Style 3" Crosstube Wheel Grid - Driver Side

Thumbscrew to Hold Wheel Grid On
Cam Lock to Lod L-Arm In
2 Hooks for Ratchet & Strap Style Hold-Down (for Safety Chains)
Shop for the right hand version of this Outer Cross Tube, 12-0905095

Fits:
Century 10 Series Carriers
Champion 10 Series Carriers

$575.99

Miller Vulcan 890 Left Wheel Grid

Note: Special Handling Fees Apply

Wheel Grid assembly, left hand, fits Vulcan 850 & 890 wheel lifts. Uses 8501000 L-arm. This part can be used to replace Part Number, 8500400.

Fits on 4" x 4" square tube
Vulcan patented strapless system
6,000lbs lift rating

$557.99

Miller Century Right L-Arm Bracket

This right hand end plate from Miller industries is used on the outer crosstube assembly on various equipment from Miller Industries. This L-arm bracket is used on the new style "Pivot-L" crosstubes. This bracket attaches to the end of the crosstube to allow your L-arm to pivot.

$230.99

Century 3 Way Pivot Right Outer Crosstube Century 6500 and Holmes DFT 650

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 whee l lifts. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

$1,571.99

Miller Century 211 L-Arm Pivot Shaft

This is a pivot shaft for an L-Arm Bracket to the crosstube on the Century 211 by Miller Industries. See Brochures for a reference chart.

$84.99

AW Direct Lighted Switch Panels

This is a lighted switch panel from AW Direct.

$212.99

Miller Century 3 Way Pivot Left Outer Crosstube Century 6500 and Holmes DFT 650

Note: Special Handling Fees Apply

Outer Crosstube assembly, left hand, New style "Pivot-L" with line-up pin, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Accepts 12-0904156 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902790.

Fits 3 1/2" x 3 1/2" square tube
Century new style "Pivot-L" with line-up pin
Uses 12-0902382 basket strap
Can also be used on Century/Champion 20 series car carriers

$1,455.99

Jerr-Dan L-Arm, Scoop Type Driver Side

$406.99

Miller Century / Champion 10 Series Right Crosstube 3"

This is a 3" right hand Outer Cross Tube from Miller Industries. It features a cam lock to hold the wheel grid onto the crossbar, a cam lock to hold the L-Arm in, and 2 hooks for a ratch & strap style hold-down. This cross tube fits 3" x 3" square crossbars. This cross tube receiver fits Century and Champion 10 Series Car Carriers.

$658.99

Miller Pivot Crosstube Left 3.5" Century / Champion / Vulcan

Also known as a wheel grid, slide bar, or receiver this 3.5" Outer Cross Tube from Miller Industries is a complete Left Hand assembly. This new style "Pivot-L" has a line-up pin and fits 3.5" x 3.5" square tubes. The cross tube fits Century, Champion, and Vulcan Car Carriers. It will accept a left hand

$1,174.99

Century/Vulcan/LCG Pivot Crosstube Right 3.5"

Note: Special Handling Fees Apply

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete right hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts Right Hand Tire Restraint L-Arm, 12-0904156. Also, shop for the left hand version of this Outer Crosstube, 12-0909499L, by clicking here. Please see the brochure tab for a list of assemblies and breakdowns.

New style Century "Pivot-L" with line-up pin
Get the left hand version of this Outer Crosstube, 12-0909499R, by clicking here

Fits
2005-Current Century 10 Series Steel & Aluminum Carriers
2009-Current Century LCG 12 Series Steel and Aluminum Carriers
2009-2014 Century LCG 16 Series Steel & Aluminum Carriers
2009-Current Vulcan LCG 12 Series Steel & Aluminum Carriers
2009-Current Vulcan LCG 16 Series Steel & Aluminum Carriers

$964.99

Miller Pivot Crosstube Left 3.5" Century / Vulcan / LCG

Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete left hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts

$964.99

Century / Champion 10 Series Left Crosstube 3"

This is a 3" left hand Outer Cross Tube from Miller Industries. It features a cam lock to hold the wheel grid onto the crossbar, a cam lock to hold the L-Arm in, and 2 hooks for a ratch & strap style hold-down. This cross tube fits 3" x 3" square crossbars. This cross tube receiver fits Century and Champion 10 Series Car Carriers.

$665.99

Miller Crosstube 3224 Rt. Outer

This part can be used to replace Part Number 12-0802232.

$1,718.99

Miller Outer Crosstube Left Century Formula 6500 and Holmes DFT 650

Outer Crosstube assembly, left hand, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Uses 12-0903478 standard 3500lbs l-arm.

$2,027.99

Miller Outer Crosstube Right Century Formula 6500 and Holmes DFT 650

Outer Crosstube assembly, right hand, fits Century Formula 6000 & 6500 and Holmes DFT-650 wheel lifts. Uses 12-0903479 standard 3500lbs L-Arm.

$2,050.99

Miller Passenger Pivot-Style L-Arm Receiver Bracket - Vulcan 896 & 898

This passenger side pivot-style L-Arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 896 and 897 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin and the comfort grip stop pin.

$337.99

Stinger Tube

$1,732.99

Rear Tube Rail

$932.99

Miller Century 15 & 20 Series Left Crosstube 3.5"

Please Note: Product Discontinued - ALL SALES FINAL!

$554.13

Power Up Switch Panel 4 Switch RH Dash 08'- Current Dodge / Sterling 3500 / 4500 / 5500

Custom In Dash Switch Panel, with all switches factory wired and ready to install. This good-looking in-dash panel has finished face plate, engraved legends, and LED backlighting. The biggest advantage of this panel is the circuit breaker switch(s). Each individual switch protects itself with its own internal circuit breaker. 2008 to current Dodge/Sterling D3500/4500/5500, mounts in dash to the right of the steering column. Available with up to 5 switches.

$333.99

Miller Outer Crosstube Left Challenger I-500

Outer Crosstube assembly, left hand, fits Challenger I-500 wheel lifts, accepts RB0120 l-arm.

$645.00

Power Up 5 Switch Panel 08'- Left side - Current Dodge / Sterling 3500 / 4500 / 5500

Custom In Dash Switch Panel, with all switches factory wired and ready to install. This good-looking in-dash panel has finished face plate, engraved legends, and LED backlighting. The biggest advantage of this panel is the circuit breaker switch(s). Each individual switch protects itself with its own internal circuit breaker. 2008 to current Dodge/Sterling D3500/4500/5500, mounts in dash to the left of the steering column. Available with up to 5 switches.

$247.99

Power Up Switch Panel Chevy In Dash 5 Switch

This In Dash Switch Panel from Power Up Products comes with all switches factory wired and ready to install. This good looking in dash panel has a finished face plate, engraved legends and LED backlighting. The big advantage of this panel is the circuit breaker switches. Each individual switch protects itself with its own internal circuit breaker. Switch panel mounts in the right dash panel below the transmission temperature gauge of 2003 to current Chevrolet/GMC 4500/5500/6500 trucks.

$349.99

Power Up 6 Switch Panel Hino Chassis

Custom In Dash Switch Panel, with all switches factory wired and ready to install. This good-looking overhead panel has finished face plate, replaceable legends, and LED backlighting. The biggest advantage of this panels is the circuit breaker switch(s). Each individual switch protects itself with its own internal circuit breaker.

$459.99

Miller Outer Crosstube Right Challenger I-500

Outer Crosstube assembly, right hand, fits Challenger I-500 wheel lifts, accepts RB0120 l-arm.

$645.00

Miller Outer Crosstube Right Holmes DFT 200

Outer crosstube assembly, right hand, fits Holmes DFT200 wheel lifts. Uses GR-619 L-Arm.

$1,227.27

Miller Trunnion Pivot Century 300 Series and Challenger 4300 Series

This is the trunnion pivot weldment for the main boom. This pivot weldment will fit the Century 300 Series by Miller Industries and also the Challenger 4300 Express Series. See Brochures for a reference chart.

$457.99

Century 20 Series Left Crosstube 3.5"

This 3.5" Outer Cross Tube Assembly from Miller Industries is a complete Left Hand Assembly. It is used on the wheel lift assembly of Century 20 Series Steel and Aluminum Car Carriers that were made in 2006 to current. The cross tube is 31.5" long and it is rated at 6,000 lbs. The 3 and 4 Car Carriers use a different part number,

$680.99

Miller Left Outer Slide In Crosstube Left 24-1/2"

This Outer Left Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a

$1,130.99

Miller Right Hand Outer Slide In Crosstube Left 24-1/2"

This Outer Left Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a

$1,130.99

Power Up In Dash Switch Panel for 2013 Peterbilt

This is an in dash switch panel for Pete 330/340 series- fits center dash under radio, 2013 to current.

$695.99

Miller Tailboard Remote (124004707)

Tail Board Remote Switch Panel from Miller Industries. This Tail Board remote is water-proof for Controlling Underlift Functions.

$1,074.99

Miller Pivot Crosstube Right 3.5" Century / Champion / Vulcan

Also known as a wheel grid, slide bar, or receiver this 3.5" Outer Cross Tube from Miller Industries is a complete Right Hand assembly. This new style "Pivot-L" has a line-up pin and fits 3.5" x 3.5" square tubes. The cross tube fits Century, Champion, and Vulcan Car Carriers. It will accept a right hand

$1,174.99

Century Outer Slide In Crosstube Left 31 1/2"

Note: Special Handling Fees Apply

This Outer Left Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a 6,000 lb. Slide-In L-Arm, 12-0802606. You can also get a Right Hand Outer Slide-In Crosstube, 12-0904691, by clicking here.

31-1/2"
Fits 3-1/2" x 3-1/2" square tube
Century 6,000 lb. Slide-In L-Arm Style

$1,175.99

Miller Outer Slide In Crosstube Right 31 1/2"

Note: Special Handling Fees Apply

This Outer Right Hand Crosstube Assembly fits Century Formula 6000 and 6500 Series, Holmes DFT-650 wheel lifts, and Century 20 Series car carriers. This crosstube accepts a 6,000 lb. Slide-In L-Arm, 12-0802606. You can also get a Left Hand Outer Slide-In Crosstube, 12-0904691, by clicking here.

31-1/2"
Fits 3-1/2" x 3-1/2" square tube
Century 6,000 lb. Slide-In L-Arm Style

$1,175.99

Century 3 Way Pivot Right Outer Crosstube Century / Holmes / Champion

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this right hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Right Hand L-Arm Tire Restraint 12-0904157. To shop for the left hand version of this receiver, 12-0904152, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902897.

New style Century "Pivot-L" with line-up pin
Get a left hand version of this receiver, 12-0904152, by clicking here
Accepts a Right Hand L-Arm Tire Restraint 12-0904157

Fits:
2001-2004 Century 10 Series Carriers
2002-2005 Century 15 Series Carriers
2009-Current Century Modular 400 & 600 Wreckers
Century Formula I Wreckers
Champion 10 Series Carriers
Holmes DFT-400 Wreckers

$1,515.99

Century/Holmes/Champion 3 Way Pivot Left Outer Crosstube

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this left hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Left Hand L-Arm Tire Restraint 12-0904156. To shop for the right hand version of this receiver, 12-0904153, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902896.

New style Century "Pivot-L" with line-up pin
Get a right hand version of this receiver, 12-0904153, by clicking here
Accepts a Left Hand L-Arm Tire Restraint 12-0904156

Fits:
2001-2004 Century 10 Series Carriers
2002-2005 Century 15 Series Carriers
2009-Current Century Modular 400 & 600 Wreckers
Century Formula I Wreckers
Champion 10 Series Carriers
Holmes DFT-400 Wreckers

$1,515.99

Miller Outer Crosstube for I-400 Wheel Lift on Challenger 4700 Series LD Wreckers

This painted steel Quick Pik Lite outer crosstube assembly from Miller Industires fits the I-400 wheel lift on Challenger 4700 Series light-duty wreckers. The driver side 3 square tube accepts driver side L-Arms (Part No. 12-0904277) & the passenger side 3" square tube accepts passenger side L-Arms (Part No. 12-0904278), otherwise known as tire restraints and wheel retainers.

$1,337.99

Vulcan 3 Way Pivot Right Outer Crosstube - 890 Series

Outer Crosstube assembly, right hand, New style "Pivot-L" with line-up pin, designed for Vulcan 890 Series with 4"x4" crossbar. Accepts 12-0904157 light weight aluminum L-arm. This part can be used to replace Part Number 12-0902791.

$1,395.99

Miller Outer Crosstube - Challenger I-500 and Challlenger Invader Wheel Lifts

This passenger side outer crosstube from Miller Industries fits Challenger I-500 and Challenger Invader wheel lifts. The steel painted crosstube accepts 2 x 3 L-Arms and features a diamond-plate tire pan. Otherwise known as a tire restraint and wheel retainer, the L-Arm (Part No. RB0257) is held in place with a removable pin.

$1,564.99

1 - 56 of 56 items