Wear Pads And Kits

Sort by

Jerr-Dan Replacement Bed Lock Wear Pad

Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with one of these new blocks.

$9.39

Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan

This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x 3/8". It will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular 880/890, and 896/897. See Features for related parts and Brochures for reference charts.

$12.69

Miller Wheel Lift Wear Pad Cage Plate 804 / 6 / 7 211 / 300S and 440SL

This is the cage plate of the wheel lift on the Vulcan 804/806/807, Century 211/300 Series, and Holmes 440SL by Miller Industries. They are located on the top, inside of the outer stinger. See Brochures for reference chart.

$45.09

Century Wear Pad 3" x 3" Challenger Champion and Vulcan

This is an inner tube slide pad for the top side of the wheel lift on all Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series. It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight Express. See Features for quantities for each model needed. Each pad sold separately.

$27.19

Chevron Wear Pad 1/2" x 2" x 3" Nylatron

This is an inner tube slide pad for the top side of the auto-grip wheel lift option on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.

$20.29

Jerr-Dan Wheel Lift Wear Pad

This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. This wear pad is used on the Jerr-Dan HPL-30 and HPL-60 Wreckers.

$13.29

Century Boom Wear Pad 1/2" x 1" x 4"

Miller Industries wear pad for the wrecker boom.

$51.99

Miller Wear Pad Wheel Lift Inner Stinger Century 300 Series and Vulcan 800 Series

This is a wheel lift wear pad for the outside, top of the inner stinger on Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on the Century Express Modular 300 Series Wreckers by Miller Industries. See Features for related parts and Brochures for reference charts.

$18.49

Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series

This is a wheel lift wear pad for the inside, bottom of the outer stinger on Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features for related parts and Brochures for reference charts. This part can be used to replace Part Number, 9100112.

$25.39

Century Wear Pad Kit 10 Series

This is a 36" 10 series wear pad from Miller Industries. 36" long, 1-1/2" wide, 5/16" thick

$63.99

Miller Nylatron Bearing Pad

These are the wear pads for the inner and outer booms of the wrecker. These Wear Pads will fit the following wreckers by Miller Industries: Century Express 300 Series, EB4 Express, EB4 6500, Modular Express 300 Series, Formula I, Duplex Tilt 411 & 412, Formula 6500 - 600 Series, Midnight Express, Challenger Express 4300 Series, 4700 Series, 4800 Series, Holmes 440 Series, DFT 400, HP 552, DFT 650, and Vulcan Modular 806 and 807. See Brochures for reference chart . Each Wear Pad sold separately.

$6.69

Zips Wheel Lift Wear Pad Kit Vulcan 880 / 890

Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit includes (1)

$79.99

Chevron Wheel Lift Wear Pad Inner Boom 12 / 16 LCG Gen II

This is an inner tube slide pad for the top side of the wheel lift on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.

$20.29

Vulcan Wear Pad Bottom V60 and V70

Bottom wear pads for the underlift on a Vulcan V60 or V70 wrecker.

$20.79

Miller Wear Pad Top V60 and V70

Top wear pads for the underlift of a Vulcan V60 or V70 wrecker.

$30.39

1.00 Od X 0.75 Id X 0 Bushing

$7.49

Century Vertical Boom Guide Pad 300 Series and Vulcan 800 Series

This is a Vertical Boom Guide pad for Century 300 Express Series, Century Modular 211, Vulcan Modular 804, Vulcan Modular 806, Vulcan Modular 807, Vulcan 805, Vulcan 810 Intruder, and Vulcan 812 Intruder by Miller Industries. See Brochures for part schematics and Features to see related parts and to see what models this will fit.

$81.99

Vulcan Wear Pad Outer Stinger 880 / 890 / 805 / 896 / 897

This is a wheel lift wear pad bar for the outer stinger on light duty Vulcan wreckers by Miller Industries. There are 2 wear pads per wheel lift and they are located on the upper, outside portion of the stinger. The Vulcan models this wear pad will fit are: Vulcan Modular 880/890, 880/890, 805, 896/897. See Brochures for reference charts.

$12.84

Jerr-Dan Wear Pad Kit Aluminum and Steel

Jerr Dan rollback wear pad kit that is compatible with AEL, RST and WAR carriers manufactured November 1991 through the current year. Also fits AWL, AVP and SVP beds manufactured October 1994 through the current year. This kit comes with all of the necessary mounting hardware and 12 total pads that have different measurements. See the features below for a list of measurements.

$451.99

Jerr-Dan Wear Pad, Bed Slide

$15.59

1.25 Dia X 3.63 Pin Weldment

$72.99

Jerr-Dan Wear Pad

Jerr-Dan replacement wear pad.

$54.99

Zips Wheel Lift Wear Pad Kit Century Formula I Challenger I-400 and Holmes DFT 400

Wear Pad Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.

$99.99

Century Midnight Express Wheel Lift Stop Pad Outer Boom

This is a stop pad for the wheel lift on a Century Midnight Express by Miller Industries. It is located on multiple locations on the boom assembly on the Midnight Express.

$15.39

Jerr-Dan 0.38in-16nc Locknut

.38"-16NC Gr5 nylock locknut.

$0.69

Jerr-Dan Flat Washer

$1.89

Miller Wheel Lift Lower Tilt Wear Pad Holmes 600R Vulcan 880 / 890 and 896 / 897

This is a wheel lift wear pad for the lower tilt column on Holmes and Vulcan Wreckers. This wear pad will fit on the following wrecker models: Holmes 600R, Vulcan 880/890, Modular 880/890, 896/897. See Brochures for reference charts.

$18.89

.31in-18nc X 1.2in Fh Capscrew

$1.89

I beam wear pad for 12s/16s steel beds

12s/16s Steel Beds I Beam Wear Pad

$58.50

Vulcan Up / Down Wear Pad Holder 880 / 890 and 896 / 897

This is a wear pad holder on the up/down portion of the wheel lift by Miller Industries. It is bolted on by tow bolts and there are 2 wear pad holders per wheel lift. This wear pad holder fits the following wreckers: Vulcan 880/890, Modular 880/890 and 896/897. See Features for related hardware and Brochures for reference charts.

$30.39

Jerr-Dan Wear Pad Kit, Aluminum/STL

Jerr Dan rollback wear pad kit for 20' and 21' Jerr Dan carriers. Fits BIC (Best In Class) carriers and should be compatible with the following bed model numbers: NGAF, NGAD, NGAR, WSRB, RRSB, SLPB, NGAT, STRB, WAVB, RAYB, PAVB, ATRB, AWLB

$564.99

Miller Wear Pad Retainer Plate Vulcan 880 / 890

This is a wear pad retainer plate on the up/down portion of the wheel lift by Miller Industries. It is bolted on by 3 bolts. This retainer plate fits the following wreckers: Vulcan 880/890, Modular 880/890, and 896/897. See Features for related hardware and Brochures for reference charts.

$40.19

0.38in-16ncx1.25in Screw

$1.19

Miller Wear Pad Cage Plate Century Challenger and Holmes

This is a wear pad cage plate on the inside, bottom of the outer boom of a Century Formula I 411/412, and a Century 6500 600 Series Wrecker. This cage plate also fits Challenger 4700 and 4800 Series Wreckers. It will also fit Holmes 440 Series and HP552 Series by Miller industries. See Brochures for a reference chart and Features for related parts. This part can be used to replace Part Number 12-0703093.

$67.99

Wear Pad

$37.19

Zip's Wear Pad Kit Century Formula F6500 and Holmes DFT 650

Wear Pad Kit, Century Formula 6500 and Holmes DFT-650 wheel lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.

$125.99

Miller Wear Pad, 9.25" x 6"

This Wear Pad is from Miller Industries. It measures 9.25" long, 6" wide and .5 thick.

$28.19

Jerr-Dan Control Rod

$55.99

Century Plate, Pad Cage

This is a plate pad cage from Miller Industries.

$136.99

Passenger Side Wheel Grid

$983.99

Zacklift Z18 Horizontal Wear Pad Kit

$283.99

Century Guide Pad Challenger and Champion

This is a guide pad on the lower portion of the wrecker boom of the Century 211, 212, 300 Series, EB4 Express, and EB4 6500. This guide pad also fits the Challenger Express 4300 Series and Champion Model 101 Wreckers by Miller Industries. See Brochures for a reference chart and Features for related parts.

$97.99

Jerr-Dan Wear Pad Kit Aluminum 19'

Jerr Dan rollback wear pad kit for 19' Jerr Dan carriers. Fits BIC (Best In Class) carriers and should be compatible with the following bed model numbers: NGAF, NGAD, NGAR, WSRB, RRSB, SLPB, NGAT, STRB, WAVB, RAYB, PAVB, ATRB, AWLB

$333.99

Zacklift Z18 Full Wear Pad Replacement Kit

$389.99

Zacklift Z403 Horizontal Wear Pad Kit

$379.99

Miller Wear Pad Cage Plate Century 400 and 600 Vulcan 880 / 890

This is the cage plate of the recovery boom on light duty wreckers by Miller Industries. They are located on the top, inside of the outer stinger. See Brochures for reference charts and Features for related parts. This cage plate will fit on the following wreckers: Century 400 & 600 Series and Vulcan Modular 880/890 Series.

$54.99

Century Outer Boom Lower Wear Pad Vulcan V-50 and 20 20 Series

This is the Lower Wear Pad for the Outer Boom Assembly on a Vulcan V-50 and 20.20 Series.

$65.99

Zacklift Z403 Full Wear Pad Replacement Kit

This is a Zacklift Z403 full wear pad replacement kit.

$459.99

Jerr-Dan Wear Pad Kit 17'

This wear pad kit is for Jerr-Dan car carriers. It fits 17' AWL (Wrangler light and old style) carriers made between 1982 and 1986. The kit comes with wear pads and hardware and includes 14 wear pads, 28 flathead machine bolts, 34 lock washers, 34 hex nuts, 2 wear pads, 4 hex cap screws, 2 nylatron pads, 2 flathead machine bolts.

$438.99

1 - 60 of 74 items