Toolbox Parts

Sort by

RC Industries Toolbox Latch

This is a complete Latch assembly

$61.99

Dri-Dek 1' x 1' Interlocking Tile

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by square foot. Also available in 3'x4' Sheets and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

$5.89

In The Ditch GEN 2 Bolt Together ToolBox Top Trays

Introducing the second generation of our toolbox Box Top Tray lineup! These bolt-together Box Top Trays ship and store in a much smaller space. This also allows us to offer replacement parts in case a portion becomes damaged. All these ITD Box Top Trays now come with dividers. Giving you the choice to use them, keep them open, or install them later.

$150.99 – $232.99

Tri-Mark Stainless Paddle Latch

This stainless steel Paddle Latch is for use with new style toolboxes that have a striker pin for a latch. The latch locks over the striker pin. This latch comes with a lock and is lockable by key, which is included.

$136.99

In The Ditch Right Rotary Latch (Fits All Models)

In The Ditch Right Rotary Latch. Serial # 500657 or newer

$22.99

RC Industries Anchor Latch Pawl Kit

$19.99

In The Ditch Left Rotary Latch (Fits All Models)

Left Rotary Latch (Fits All Models) Serial # 500657 or newer,

$27.99

In The Ditch Toolbox Lanyard Cable 18in

18" Lanyard Cable is a replacement part for In The Ditch Pro Series Toolboxes. When installed on each end of a toolbox, the door in its open position is capable of holding 400 lbs.

$18.79

Phoenix Latch

Phoenix toolbox latch with key 01 crome handle and blakc Hansen housing

$96.99

Dri-Dek 3' x 12' Interlocking Roll

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by 3'x12' Rolls. Also available in 1'x1' Tiles and 3'x4' Sheets. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

$243.99

Allegis Corp. Metal End Gas Spring - 7" Stroke

Item #	Style
AC-87120	120 lbs.
AC-87150	150 lbs.
AC-8775	75 lbs.
AC-8790	90 lbs.

$25.59 – $31.79

Quantum Storage Systems Stacking Bins - All Sizes and Colors

Use alone or stack together Front, side and back grips for easy handling Reinforced sides prevent spreading High-density, FD-approved polypropylene material holds up under heavy-duty conditions in work truck shops, towing operations and service garages. Won't rust or corrode and is unaffected by weak acids and alkalis. Built-in rear hanger allows bin to hang from louvered panels or racks.

$1.79 – $44.69

Miller Paddle D-Latch

Latch Handle Only

$133.99 – $176.99

Buyers T-Handle Latch, Powder Coated w/ Chrome Handle

This is a replacement T-Handle Latch from Buyers Products. This latch is powder coated and has a chrome handle.

$40.99

Austin Hardware Door Check

Ensure that the door on your truck's storage compartment doesn't open too far and prevent it from swinging back at you or falling down with a door check from Austin Hardware. This mechanism works great on utility bodies, and the spring tension adjusts from 15 to 30 lbs. to hold a variety of door sizes and weights.

$33.99

Buyers Stainless Steel Standard T Handle Latch

This is a positive locking latch from Buyers Products. This latch is lockable by key and is made from stainless steel. It will fit most underbody toolboxes. Mounting holes, included gasket, and flush-mount design provide a snug installation. The cam adjusts from 1-1/4 in. to 2 in. to accommodate varying door thicknesses. The latch is shaped and sized to accommodate standard-size cut-outs.

$21.59

Buyers Door Seal Kit

Close up any gaps on your truck's storage compartments with a new door seal kit from Buyers Products. The system includes enough material to seal up any 24" to 60" toolbox.

$8.79

Zip's Custom Toolbox Top Tray

Note: Special Handling Fees Apply for Specific Items

$132.99 – $419.99

Jerr-Dan Ergo T-Handle Latch

This is a Jerr-Dan latch, it is an ergo t-handle. It is for the driver's side.

$200.99

Buyers Stainless Steel Standard Paddle Latch w/ Keys

This Stainless Steel Paddle Latch from Buyers Products comes with keys included. This part can be used to replace Part Number MM-529.

$28.09

Miller Chevron 49" Stainless Steel Hinge with Holes

This 49" long stainless steel hinge is used on the 49" aluminum toolbox assembly of Chevron Car Carriers. These include Chevron 16, 20 and 30 Series Car Carriers. The hinge is used with the 49" Toolbox

$61.99

In The Ditch Replacement Stainless Steel Panel For The Pro Series

This is a In The Ditch stainless steel replacement toolbox door panel.

$113.99 – $657.99

AUSTIN Flush T-Latch, Zinc

Standard Paddle Latches are 4-1/4"W x 5-1/2"H and mount in a 3-3/8"W x 4-5/8"H recess. Junior Paddle Latches are 3-5/8"W x 4-3/4"H and mount in a 2-3/4"W x 3-3/4"H recess. BL9000 T-Handle Latch is 5-3/4"W x 6"H. TH800 T-Handle Latch is 4-3/4"W x 4-7/8"H x 2-1/8"D. BL8816 T-Handle Latch is 4-3/4"W x 5-1/2"H and mounts in a 3-3/4"W x 4"H recess opening.

$76.99

Chevron 49" Hinge

This 49" Long Aluminum Hinge is used on the 49" Toolbox Assembly of Chevron Car Carriers. These include Chevron 16, 20 and 30 Series Car Carriers. The hinge is used with the 49" Toolbox

$271.99

Zip's Custom Toolbox Trim Pieces

Add some flash to your Zip's Custom Toolboxes with these custom trim piece. These trim pieces will give your toolbox a custom appearance with a professional finish. These stainless steel Zip's Custom trim pieces get mounted to outside of the Zip's Custom toolbox with double sided 3M tape.

$36.00 – $122.00

In The Ditch Air Line and Wiring Bracket

This Air Line and Wiring Bracket from In The Ditch connects to any tool box to provide a covered channel to run wires out of the tool box for lighting. An airline can also be run through the bracket to provide an easy to access airline connection.

$35.29

Phoenix Smooth Rubber Mat 36", 48", 60" Boxes

These Phoenix rubber mat for toolboxes are smooth on both sides. These rubber mat measures 36",48", or 60"W x 18"D.

$27.29 – $36.79

In The Ditch 20in Connecting Rod

This is just the rod. If you are needing the complete replacement ITD7110 (2), you would also need to order the the following ITD7113 (2) and ITD20205 (4)

$11.99

Buyers Standard Size Rectangular Rotary Paddle Latch

Buyers Products Standard Size Rectangular Rotary Paddle Latch is a single-point rotary latch with installed gasket and is designed to handle the demands of daily use. Constructed from polished stainless steel, this rectangular latch has hidden studs to add an extra level of security. Simply close the latch and go, or use the included keys to lock it.

$44.69

Miller Paddle D-Latch Mechanism

Latch mechanism and hardware for D-paddle latches for storage doors on Vulcan Heavy Duty wrecker bodies.

$95.99

Allegis Hansen Door Latch

This Hansen Door Latch from Miller Industries is used on the Body Assembly Toolbox Doors of Century 1040B / SDU3 Wreckers. The latch replaces your new style push button latch. See the brochure tab for breakdowns.

$138.99

Buyers Cylinder Lock

This cylinder lock comes with two keys.

$7.99

Buyers Lock Cylinder with Key

Buyers Products Replacement Lock Cylinder with Key for Buyers Products Truck Box Latches fits the following Buyers Products latches (see "Related Products" below for more information): L1883, L1980, L8815, L8816, L8816R, L8825, L8835, L8855, L8915, LL9000, and LL90003.

$6.49

Buyers T Handle Latch w/ Double Point

This is a standard size 2 point T-Handle latch with mounting holes by Buyer's Products. This latch features 2 point construction and includes rods that make this latch a great option for long doors. This is a flush mounted latch that offers a smooth, perfessional look. It is corrosion resistant with mounting holes to make installation quick and easy.

$53.99

Ch502 Key Lock Cylinder

Allegis replacement cylinder lock works for any Allegis D ring lits or like paddle latch even the T-handles.

$12.29

Miller Rotary Style Latch

This stainless steel rotary style latch from Miller Industries is used on the new style toolboxes with a striker pin for a latch. It comes with a lock and key. This part can be used to replace part number 9048750. This latch uses striker part number 12-0803703 and gasket part number 12-0304425.

$128.99

Zip's Toolbox Door Trim 9 Pieces (108 CA Body)

Toolbox Door Protector Trim Kit for All of The Side Doors On The Road Service Body. For 108" CA Body.

$160.00

Phoenix Toolbox Cable 20"

Keep the doors on your storage boxes in good working order with replacement cables from Phoenix.

$7.59

Bawer Hinge Kit

Hinge kit for Bawer box.

$29.59

Dri-Dek 12" x 2" Interlocking Edge

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. These edges are 12"x2" and are sold individually. Also available in 1'x1' Tiles, 3'x4' Sheets, and 3'x12' Rolls. Complete your area with the Dri-Dek corner pieces to smooth and round out your full body mat.

$3.29

Bawer Gas Shock

These are replacement gas spring set of two. These shocks are for a drop down door on a Bawer toolbox. They are a lower pressure than the V9907 shock. Use V9907 for

$80.89

Buyers Junior Paddle Latch, Stainless, 4-3/4" x 3-5/8"

Buyers Products Junior Flush Mount Rectangular Non-Locking Paddle Latch is a single point latch built to handle the demands of daily use. The non-locking, rectangular latch is designed to mount into a 2-3/4 in. by 3-3/4 in. recess and is available in rust-resistant steel (welded on) or stainless steel (bolted on).

$12.89 – $20.79

Buyers Standard Size Single-Point Rotary Paddle Latch

This is a standard size single-point rotary paddle latch that has a gasket installed and is designed to handle the demands of daily use. This latch is by Buyers Products and is constructed from polished stainless steel. This latch has hidden studs to add an extra level of security. Simply close the latch and go, or use the included keys to lock it.

$37.99

RC Industries, T Handle Cylinder Lock

This Replacement Lock Cylinder with Key from RC Industries fits standard T-handles on truck storage tool boxes. The cylinder is designed to fit below the handle and comes with two keys.

$17.69

Buyers Junior Flush Mount Rectangular Paddle Latch

Buyers Products Junior Flush Mount Rectangular Paddle Latch is a single-point latch built to handle the demands of daily use. The lockable, rectangular latch is designed to mount into a 2-3/4 in. by 3-3/4 in. recess and is available in rust-resistant steel (welded on) or stainless steel (bolted on).

$30.59

Miller Lock Cylinder and Key Tm700 Type2 Cam

$13.19

In The Ditch LED Toolbox Light Kit

Having issues seeing inside your ITD toolbox? This In The Ditch LED Toolbox Light Kit is the perfect fit! Designed to make the users life easy! As soon as the toolbox door is opened, the 36” LED strip will light the entire box. Once you’re done you just shut the toolbox door and the timer will shut the light off (about 15 seconds), no more forgetting your toolbox lights on. This kit is so simple to install, there is no drilling or cutting required and its shipped out the ITD Air Fitting and Wire Routing Bracket so you have a nice clean finished look after you install. This LED Light Kit will light up any toolbox or dark space with 12-volt access.

$167.99

Miller Paddle D-Latch Gasket

Keep the working parts of the D-latch door handle on your truck's storage box free from moisture with this replacement foam gasket from Miller Industries.

$8.29

Dri-Dek 3' x 4' Interlocking Sheet

Every year more fleet managers, tradesmen, and fire chiefs outfit their trucks with Dri-Dek. Why? Because it works. Dri-Dek cushions equipment and when it gets wet, the raised flow-through surface lets air flow for fast drying. It stands up to oils, grease, alkalies and solvents. It supports the weight in any climate without cracking or buckling. Installs in minutes, lasts for years. Sold by 3'x4' Sheets. Also available in 1'x1' Tiles and 3'x12' Rolls. Complete your area with the Dri-Dek corner and edge pieces to smooth and round out your full body mat.

$84.99

Miller Kit, Eberhard 1 PT LED HND.

This replacement Latch from Hanson is typically used on Century Heavy Duty Wreckers. It is made from aluminum and has a lock over striker pin. The latch is lockable with the provided key. ***New style lighted handle***

$254.99

SnowDogg T Handle Latch Gasket

This is a SnowDogg gasket, t-handle latch, for L8815 latch.

$0.89

Tri-Mark Cylinder Lock and Key

Replacement Cylinder Lock and Key for Tri-Mark Latches.

$13.99

Buyers Stainless Steel Hinge

Note: Special Handling Fees Apply

This is a Buyers hinge, it is stainless steel. Comes in 6' length only.

This stainless steel hinge is sold per 6' piece.
Product Dimensions: 72"L x 2"W x .35"H

$57.99

Buyers 3 Point Latch w/ Rods

Buyers Products Standard Size 3 Point T-Handle Latch with Mounting Holes comes with a lock and key set installed, and rods. The latch is constructed from stainless steel for durability and corrosion-resistance, and features a durable, folding T-handle. The cam can adjust from 1-1/4 in. to 2 in to accommodate varying door thicknesses. The added rods increase secure latching points.

$50.99

RC Industries Smooth Aluminum Unassembled Box Top Tray

This is RC Industries .100 smooth aluminum unassembled toolbox box top tray.

$168.99 – $215.99

Tri-Mark Lock Cylinder Nut (TM700)

This is a Locking Cylinder nut works with (TM700).

$0.51

Stellar T Handle Latch Locking

American Eagle Locking T-Handle. This Single Handed T-Shaped Latch Works Great For Convenient One-Handed Access. All Of American Eagle's Drawers Are Keyed For Security.

$9.99

Allegis Lock Cylinder and Key

This is a universal lock cylinder and key CH501 from Allegis Corp.

$10.09

Buyers 3-Point T-Handle Locking Latch

Buyers Products Replacement Poly Underbody Flush Mount T-Handle Latch has four mounting studs to mount flush with the surface for a smooth and professional finish. The 3-point latch is constructed from polished stainless steel for maximum corrosion resistance. The roller cam adjusts from .25 in. to 1.6 in. to accommodate varying door thickness. The latch is designed to work on Buyers Products polymer underbody truck boxes and will not work with other truck boxes.

$36.89

RC Industires Stainless Steel Toolbox Door w/New Latch

This is the RC replacement toolbox door with the new latch with a black base.

$369.99 – $513.99

1 - 60 of 145 items