D-Rings And Tie Down Anchors

Sort by

B/A Products Weldable Grab Hooks G70

Weldable Grab Hooks are specially made to weld on to any flat surface that you need a place to hook a chain.

$6.99 – $28.99

Zip's Weldable Grab Hooks G70

Zips Weldable Grab Hooks are specially made to weld on to any flat surface that you need a place to hook a chain.

$3.69 – $12.99

B/a Products Weld-on D-Rings

Weld these D-Rings to your Wrecker, Carrier, or Trailer to assist you with all of your tie-down and hauling needs.

$14.99 – $27.99

Buyers Weld On Grab Hooks

These Weld-On Grab Hooks from Buyers Products are perfect for use with safety chains. Just weld these hooks on to the back of your wheel grids, or anywhere else you need an extra hook.

$3.99 – $8.39

Miller Keyhole Plate Double Banjo Eye 3/8"

This Keyhole Plate from Miller Industries has a Double Banjo Eye that will provide an additional tie-down point. The keyhole plate can be bolted or welded into place. This plate is 5-7/8" x 7-1/2" x 3/8" thick steel that will accept up to 3/8" chain. This part can be used to replace Part Number 12-0720078. Bare Steel.

$43.19

Buyers Delta Ring w/ Weld On Bracket

Weld these D-Rings to your Wrecker, Carrier, or Trailer to assist you with all of your tie-down and hauling needs. Includes a weld-on mounting bracket made of AISI-1025 steel for 5/8" and AISI-1045 on 3/4" and 1".

$10.59 – $19.69

Miller Keyhole Plate Banjo Eye 3/8" Weld In

Banjo Eyes provide Additional Tie Down Points

$26.39

Yoke G80 Excavator Weld-On Hook - test

The Yoke 1-Ton Grade 80 Excavator Weld-On Hook is a highly popular weld-on hook throughout the towing industry, and for good reason. It's designed to be welded onto mobile lifting equipment to provide a pick point that offers quick and hassle-free sling attachment. Additionally, it offers heavy-duty latch locks with hook tips for a tight, secure grip. It is crafted from high-quality alloy steel and can handle a working load limit of 2,200 lbs.

$61.99 – $565.99

Miller Keyhole Plate w/ Bolt Holes

Bolt on Banjo Eyes make it easier to replace worn or broken chain tie downs. Used on aluminum or steel car carrier beds. Galv

$40.19

Buyers Stake Pocket 1/2" Forged D-Ring with 2-1/2" I.D.

The Stake Pocket 1/2 Inch Forged D-Ring with 2-1/2 Inch I.D. from Buyers Products can be quickly drop-mounted into a stake body pocket as an anchor point for chains or straps.

$21.39

Gunnebo Grade 80 Weld-On Anchor Hooks

The Gunnebo-Johnson Anchor Hook allows you to weld onto any surface for an added anchor point. Spring-loaded latch is very strong, made from alloy steel, same as the hook. Welding instructions are supplied. Proof-tested and certified.

$114.99 – $458.99

B/A Products Bolt On Delta Rings 1/2"

These Bolt on D-Rings come with a two hole mounting bracket, which adds an extra tie down point without welding. The brackets are 1-5/8" wide and 3/16" thick with square mounting holes that accept 3/8" Carriage Bolts.

$7.99 – $9.99

Anymount Swivel D-Ring

The Anymount Slider 360 from Secure Tool is a versatile lashing point for trailers, pickups and any other surface without a permanent option to secure cargo, equipment and vehicles for transport. The bracket clamps onto virtually any location to provide great flexibility and adjustability for any size payload.

$34.99

Buyers Keyhole Plate Banjo Eye 5/16"

This Keyhole Plate from Miller Industries has a Banjo Eye that will accept 3/8" chain. This keyhole plate is perfect if you need to add a tie-down or replace an existing tie-down. This keyhole plate can be bolted or welded into place. This plate is 3-1/2" x 3-1/2" x 5/16" thick steel that will accept 3/8" chain.

$8.39

Buyers Forged D-Ring with Integral Bracket

Secure your load with confidence using this 1/2" forged D-ring from Buyers Products. The single-bolt mounting bracket makes it easy to install this D-ring in a limited space. The integral bracket is compatible with a 3/8" carriage bolt and is ideal for when space is limited.

$7.99

Miller Approach Plate Kit

This is a Car Carrier Approach Plate Kit from Miller Industries. It comes with four plates, and all of the hardware to attach. This hardware includes bolts, nuts and washers. The kit is used on aluminum or steel car carriers and it makes it easier to replace worn or broken chain tie downs.

$138.99

Buyers Keyhole Plate Single Banjo Eye 5/16"

These handy banjo eyes are stamped from 5/16" material and will accept 5/16" chain. These are perfect if you need to add chain tie downs or if you are repairing or replacing your existing tie downs.

$7.89

Buyers Mini D-Ring

Secure your load with confidence using this weld-on 1/2" forged D-ring from Buyers Products. The D-ring and 2" bracket feature C-1045 forged steel construction and offer a working load limit of 4,080 lb. D-rings are not approved for overhead use.

$8.39

Ancra Forged Ring Assembly w/ Weld-On Clip

Made of high-strength steel, the forged steel heavy-duty D-ring with weld-on clip provides a durable and reliable tie-down method that will last for years. The D-ring can add versatility and options for utility trailer applications since it can be placed almost anywhere along your flatbed truck or trailer.

$10.99 – $35.99

Durabilt 18″ G70 Chain Anchor with 4″ Delta Ring & 3/8″ Eye Grab Hook

Chain Anchor – 18″ G70 Chain w/ 4″ Forged Delta Ring & 3/8″ Eye Grab Hook.

$20.99

Ancra 1" Forged Steel Bent Heavy-Duty D-Ring w/ Weld-On Clip

Made with rugged forged steel for super high strength and durability, Ancra's 1" forged steel heavy-duty D-ring with weld-on clip can handle a wide variety of heavy-duty cargo. Adding a securement ring to your truck or trailer can provide more options for tying down cargo and can add the extra versatility you need to get the job done quicker and easier.

$40.99

Buyers Plate-Mounted D-Ring

Buyers Products Bolt-On 5/8 Inch Forged D-Ring spreads the "pull" to the entire mounting plate instead of concentrating it on a single point. Its bolt-on design means you don't have to weld, so it's great for flat surfaces where welding is not an option. The 5/8 in. diameter D-ring comes with a forged mounting bracket welded onto a steel plate. A black powder-coated finish adds durability and corrosion protection. Mounting hardware and two back support bars are included. Be sure to check the capacity of the surface you are mounting prior to use.

$27.09

Miller Double Banjo Eye Narrow

Double Banjo Eyes provide additional tie down points.

$43.09

Buyers Forged Rotating Straight D-Ring with Mounting Bracket

Secure your load with confidence using the Rotating 1 Inch Forged D-Ring from Buyers Products. This D-ring has a weld-on mounting bracket and rotates easily to give you a variety of optimum strapping angles.

$35.33

Buyers Surface-Mount Rope Ring with Forged Steel Clamp

Versatile surface and recessed Rope Rings provide durable anchoring points to help keep cargo in place.

$1.89 – $7.59

B/A Products Delta Ring Curved 55 Degrees 1"

This Curved D-Ring from B/A Products is 1" and comes formed at a 55 degree angle extending out from the mounting surface. It can be welded to your Wrecker, Carriers, or Trailer to assist you with all of your tie-down and hauling needs.

$32.99

Ancra H2 Hook

Ancra's H-2 Hook is engineered to take on a wide variety of different tie-down jobs that require the unyielding strength and durability of our hardware. With a working load limit of 5,400 lbs, this hook is flame-cut from 5/8-in. material and can be easily welded anywhere onto your vehicle. Its 0.81-in. opening allows it to accept web loops, D-rings, cables, or ropes, giving you a wide assortment of different securement options that you can use to successfully tie-down your cargo. Once properly secured, the hook meets anchorage requirements.

$13.99

Buyers Flush Mount Delta Ring

Add extra tie down points by bolting or welding these Heavy Duty Flush Mounted D-Rings.

$24.89

Miller Bolt On Deck Delta Rings

Bolt-on Deck D-Rings from Miller Industries. These D-Rings can be mounted in custom locations on the deck of a car carrier. Sold as Each.

$100.99

Ancra Corner Iron Hook

Letting your webbing, ropes, and cables constantly rub against sharper corners is a good way to degrade their strength and reliability quickly. The purpose of the Corner Iron Hook is to act as a corner for the tie-down to wrap around without risking abrasive damage. This heat-treated steel hook is designed with no sharp corners, reducing the amount of abrasion that can occur to the rope or cable or webbing tie-down you are using.

$9.99

Buyers Trailer Bed Chain Tie-Down

The Trailer Bed Chain Tie Down from Buyers Products creates a sturdy, recessed anchor point on your flatbed floor or trailer bed. With a working load limit of 6,600 lb, it uses 3/8 in. Grade 70 chain. Apply it to your recessed wooden floor by welding to the understructure so the tie down will lay flush when installed.

$20.99

Ancra Weld-On Black E-Coat Floor Chain Tie-Down

Floor chain tie-down anchors are available in either weld-on or bolt-on models to meet your specific needs. Each are made with 3/8 in grade 70 transport chain for strength and durability.

$34.99

Buyers Straight Weld-On Stake Pocket

Buyers Products Straight Weld-On Stake Pocket is ideal for securing stake body wall assemblies on the straight-side of a stake body flatbed or trailer.

$4.39

Ancra 1/2" Forged Steel Heavy-Duty D-Ring w/ Bolt-On Clip

Ancra's 1/2" forged steel heavy-duty D-ring with bolt-on clip is made with tough forged steel for high strength and durability, and is an ideal choice for utility trailer applications. With quick installation and the ability to be placed in a variety of locations, the D-ring can add versatility and provide more options for securing cargo.

$11.99

Buyers Recessed Eye-Ring Kit

The Heavy Duty Recessed Rope Ring from Buyers Products features high capacity holding power for your service body or other commercial work truck. It carries a working load limit of 2,000 lb. Designed for exterior use, this ductile iron rope ring is available with several mounting/finish options, including an optional back plate.

$16.89

Ancra Bolt-On Plated Floor Chain Tie-Down

Ancra's bolt-on plated floor chain tie-down allows the user to reliably secure heavy-duty cargo by chains from the floor, providing you with more options to tie-down a variety of cargo. Featuring 3/8-in. grade 70 transport chain for high strength and durability, the floor chain tie-down offers long-lasting performance and dependable strength.

$47.99

D Ring Weldment Dual Key Slot

$102.99

Zips Weld-on D-ring

When it comes to D-rings, durability and reliability are extremely important. That’s why the Weld-On D-Ring from Zip’s AW Direct takes those traits so seriously. Made of forged steel, this heavy-duty tie-off ring with a weld-on steel bracket is very strong. It is non-coated and doesn’t have any finish on it so you can paint it yourself in order to match your vehicle’s design.

$5.99 – $23.99

Gunnebo Classic Universal Weld-on Hook

Imperial

Item #	GI-Z1002560	GI-Z6511810	GI-Z7009060	GI-Z6455730	GI-Z6521160	GI-Z6455800	GI-Z6515390	GI-Z6456030	GI-Z1007850	GI-Z1007851
Code	UKN-0.75*	UKN-1*	UKN-2*	UKN-3	UKN-4	UKN-5	UKN-8	UKN-10	UKN-15	UKN-20
WLL lb*	1,653	2,204	4,500	6,612	8,800	11,020	17,632	22,040	33,060	44,080
B	0.79	1.06	1.30	1.18	1.18	1.34	1.34	.85	2.17	2.56
G	0.51	0.67	0.79	0.91	1.14	1.18	1.57	1.69	1.97	2.36
H	0.79	0.98	1.18	1.26	1.50	1.85	2.01	2.28	2.64	3.35
K	0.75	0.98	1.18	1.38	1.65	1.77	1.97	2.17	2.36	2.36
L	3.21	3.74	4.49	5.20	5.51	6.50	6.77	8.66	9.45	10.83
A	0.20	0.24	0.31	0.39	0.43	0.47	0.51	0.55	0.59	0.59
X	2.20	2.83	3.39	4.13	4.49	5.16	5.24	6.69	7.40	8.15
Weight lb	0.44	1.32	1.98	2.87	4.41	7.05	7.94	18.08	21.61	27.34
Fulfills requirements in: EN 474-1. * Welding plate slightly curved. ** Safety factor 5:1. All dimensions in inches.

Metric

Item #	GI-Z1002560	GI-Z6511810	GI-Z7009060	GI-Z6455730	GI-Z6521160	GI-Z6455800	GI-Z6515390	GI-Z6456030	GI-Z1007850	GI-Z1007851
Code	UKN-0.75*	UKN-1*	UKN-2*	UKN-3	UKN-4	UKN-5	UKN-8	UKN-10	UKN-15	UKN-20
WLL tonnes*	0.75	1.0	2.0	3.0	4.0	5.0	8.0	10.0	15.0	20.0
B	20	27	33	30	30	34	34	47	55	65
G	13	17	20	23	29	30	40	43	50	60
H	20	25	30	32	38	47	51	58	67	85
K	19	25	30	32	38	47	51	58	67	85
L	81.5	95	114	132	140	165	172	220	240	275
A	5	6	8	10	11	12	13	14	15	15
X	56	72	86	105	114	131	133	170	188	207
Weight kg	0.2	0.6	0.9	1.3	2.0	3.2	3.6	8.2	9.8	12.4
Fulfills requirements in: EN 474-1. * Welding plate slightly curved. ** Safety factor 5:1. All dimensions in mm.

$150.99 – $798.99

Ancra Tarp Hook

For securing tarp straps to trailers. 1/2-in. steel wire. Unfinished light oil.

$3.99

Ancra Black Trim Collar Truck and Trailer Fitting

Ancra's black trim collar truck and trailer fitting is engineered with the strength you need to maintain a reliable and supportive grip on your tie-down assembly so that your cargo remains firmly in place throughout transit. Very easy to install, this fitting is designed for low-profile mounting so that it doesn t get in the way during the loading and unloading process. Able to handle a working load limit of 530 lbs, the fitting s durable ring is large enough to be used with a variety of tie-down hooks. When not in use, the ring lies flat against the surface. This is the kind of Ancra-quality anchor point you need for your trailer.

$4.99

Ancra Recessed Pan Truck and Trailer Fitting

Ancra's recessed pan truck and trailer fitting is designed to allow you to create a reliable and durable attachment point anywhere you need it within your truck or trailer. Manufactured with a working load limit of 1,666 lbs., this fitting is designed for low-profile mounting and is tensioned to reduce ring movement but is loose enough for easy lifting. The ring is wide enough to accept most tie-down hooks. Once installed, this fitting provides you with an industrial strength anchor point that offers strong and solid holding power.

$6.99

Buyers Heavy Duty Rotating Rope Ring

Get high capacity holding power and the ability to rotate 360 degrees with the Heavy Duty Recessed Rotating Rope Ring from Buyers Products. It carries a working load limit of 2,000 lb. Bolt it to the floor or weld it to steel cross members as needed. The sturdy rope ring is zinc-plated for corrosion resistance and is available with a zinc-plated back support plate.

$24.89

Buyers Delta Ring w/ Formed Angle

This forged D-ring from Buyers Products come with a U-shaped bracket so you can weld into place making them perfect for medium or heavy duty tie down anchors. Commonly used on the rails of large trailers for outside of the rail tie points. The lower half of the 1" dia. ring is formed at a 55? angle to extend from the mounting surface. Ring is supplied with a 2-1/8" wide forged mounting bracket.

$21.29

Buyers Forged Rotating Angled D-Ring with Mounting Bracket

Secure your load with confidence using the Rotating Angled 1 Inch Forged D-Ring from Buyers Products. This D-ring includes a mounting bracket and rotates easily to give you a variety of optimum strapping angles. It has a 55? bend that makes it easier to attach a strap in various applications.

$39.29

SafeAll Delta Ring with Weld-on Ring

This weld-on Delta Ring from SafeAll can be attached in a variety of locations to best suit the freight, equipment or vehicles being transported. This versatility makes it a great addition to any industrial equipment, trailer or wrecker. This Delta Ring is available in four sizes to provide suitable anchor points for whatever is being hauled.

$7.99 – $19.99

Picture of Buyers Recessed Eye-Ring, Eye Ring Only

Pivots through 180.
Manufactured from forged alloy steel, quenched and tempered.
Manufactured and tested in accordance with EN1677-1.
Load rated parts are 100% magnaflux crack detected.
Individual forged parts are traceable to Test Certification.
Proof tested to 2.5 times the WLL.
Fatigue rated to 1.5 times the WLL.
All YOKE Lifting points meet or exceed all the requirements of ASME B30.26.
WLL forged onto each product for quick and easy identification.
Lugs designed to assist the welding process.
A protected spring keeps the load ring in a required position. The parts are connected in such a way that they remain captive. The spring also reduces noise caused by vibrations

$34.99

Buyers Zinc-Plated Back Support Plate For B901 Series Rope Ring

Buyers Products Zinc Plated Back Support Plate for B901 Series Rope Ring provides additional support for a sturdy installation.

$8.99

1 - 51 of 51 items