Reel and Hose Accessories

ITI Yellow Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

Utilizing the Pocket Plug Container Skate from ITI makes loading or moving shipping containers slick and easy! Place this patented sea container skate beneath the corner of the container - fitting the raised plug nicely into the oblong pocket of the container. The skate's rounded ends eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

The Flexzilla revolution continues with the Flexzilla polyurethane recoil air hose. Flexzilla recoil air hose exhibits extreme, all-weather flexibility and out performs nylon hose. Plus, with the field repairable fitting, damaged hose can be repaired quickly, using tools commonly available on the jobsite.

ITI has produced a yellow Signature Series of its popular line of skates to help tow operators identify them in low-light situations and, therefore, keep better control of them under a pull. They are made from the same durable material as ITI s traditional, earth-tone line of skates but offer greater visibility at night and better contrast against gravel and dirty road surfaces. To make sure you have the right skate for the job, ITI has assembled this line of yellow skates into a Rollback Essentials Kit. Included are a set of four automotive skates for use with most passenger vehicles. The kit also features a control arm skate suited for vehicles with wheel impairment or suspension issues as well as two extensions: one for additional clearance and another for trailer axles. Save over buying these skates individually.

ITI Axle Tube Height Extender works in tandem with the ITI Standard Control Arm Skate (Item #

ITI Crossmember Container Skate makes loading and moving shipping containers easier. When the corner pockets are not accessible due to dirt, mud or debris - this handy skate is the tool to use. Simply find a crossmember on the bottom side of the sea container and place the crossmember into the 4x4 pocket and winch into position. The skate's tapered end eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

ITI XL Big and Tall Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck with larger tire dimensions. This XL skate is 5 inches longer than the standard "Big & Tall" skate - perfect for the oversized pick-up truck tires. It is also great for use with equipment or tractors with larger tires.

In a cramped workspace, sometimes you have to pull hoses from an angle that puts pressure on the hose, eventually wearing it down and damaging it. However, with the Reelcraft Hose Roller Guide, this is a problem of the past. Designed to help guide the hose in and out of the reel from any angle, the roller guide helps your hose live a longer life. Additionally, this bracket should fit on just about any reel we sell.

Flexzilla Pro Reusable Fittings allow you to quickly repair Flexzilla hoses on the job site or create a custom length hose in just three easy steps.

The Whip Hose Assemblies increases longevity of the main hose while reducing the user fatigue by eliminating weight of coupler/plug as well as increases the mobility in tight spaces and improves air tool ergonomics. The Flexzilla Whip Air Hose is a short length of hose with a swivel coupler on one end to increase longevity of the main hose and reduces user fatigue by eliminating the weight of the coupler/plug. Plus, select Flexzilla Whip Air Hose features a 1/4" MNPT ball swivel. With a 30 degree tilt and 360 degree swivel action, the ball increases mobility in tight work spaces. Overall you get improved air tool ergonomics.

Reels can't work without allowing a hose or cord to unwind and retract freely. That's what the swivel is for. Allowing the hose or cord to do what it needs to, you extend the life of the hose or cord. Plus, you prevent twists and tangles by allowing it to seamlessly retract.

On many reels, the hose comes flying back onto the reel without any sign of stopping, and sometimes, this may even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

This 360 degree swivel connector is all about versatility and is easy to use. A 3/4 in. inlet and outlet allows the connector to interface with a wide range of nozzles and hoses, giving it fantastic versatility.

On many reels, the hose comes flying back onto the reel without any sign of stopping, and sometimes, this may even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

On many reels, the hose comes flying back onto the reel without any sign of stopping, and sometimes, this may even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

This is a Zip's Custom 4 piece bracket that has a wide variety of uses. This bracket can store your extention cords or your air hoses. They can be used to customize your toolbox with the set up that is perfect for you.

On many reels, the hose comes flying back onto the reel without any sign of stopping and sometimes this even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that's a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

What do you do when you have multiple reels for multiple different jobs? You don’t need each one for every job, but you only have room for one. Well, you get yourself the Reelcraft Pivot Base Bracket. With it, you can mount a variety of different Reelcraft reels to it so you’re ready for any job.

Too many reels yet not enough space? Listen, we’ve got you covered. With the Reelcraft 340 Degree Pivot Base, you can mount different reels with ease. It also eliminates the need for expensive custom mounts or installation services. You just do it yourself.

This hose reel support panel welds to the front of RSB body for more stability.

On many reels, the hose comes flying back onto the reel without any sign of stopping and sometimes this even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

Adjustable bumpers are solid molded rubber assuring a long life and nonslip grip. Bumpers allow the desired length of hose or cord to be permanently stored outside the reel. Bumpers are included on the reels purchased with hose or cord. When ordering, advise the part number, reel model and the hose I.D. and O.D or the cord AWG and number of conductors.

****For Hose Outside Dia. Range

1.06 to 1.38 in

          On many reels, the hose comes flying back onto the reel without any sign of stopping, and sometimes, this may even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

It’s also super easy to attach. The adjustable bumper stop comes in two parts, which you place over the hose, and screw in. Since it’s also compatible with many reel series, you should be able to confidently buy a bump stop for your specific product and have it work.

This particular bump stop is used with a 3/4" inner hose diameter.

• Rubber
• Lightweight
• Accessory for reels
• Used with 3/4" inner hose diameter
• .32 lbs
• Compatible with many reel series

On many reels, the hose comes flying back onto the reel without any sign of stopping and sometimes this even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.

On many reels, the hose comes flying back onto the reel without any sign of stopping, and sometimes, this may even cause the hose to retract too much, making it difficult to grab the hose again. Well, with the Reelcraft adjustable bumper stop, that’s a problem of the past. The adjustable bumper stop helps absorb the impact when reeled in and prevents the hose from being retracted too far.