Control Handle Hardware

Showing 53 items item

Sort by

Portwest Bizflame Knit Women's FR Crew Neck Shirt

This Henley provides basic protection against heat and flame, electric arc and anti-static, keeping workers both safe and comfortable on the job. This ladies garment has a crew neck and is easy to layer and also looks great on its own.

$57.99

Control Right Side Plate Cover Low Side Wreckers w/ 8 Controls Century 2465 / 3212 and V24 / V30

The Miller Industries right control plate cover is used to cover up the control handle openings and illustrate the function of each control handle on a low side Heavy Duty wrecker with 8 control handles.

$166.99

Control Left Side Plate Cover Low Side Wreckers w/ 8 Controls Century 2465 / 3212 and V24 / V30

The Miller Industries left control plate cover is used to cover up the control handle openings and illustrate the function of each control handle on a low side Heavy Duty wrecker with 8 control handles.

$166.99

Miller Carrier Control Rod 77" Anti Tilt 10 / 15 Series 05 and Up

44.25" passenger side control rod for HD Jerr Dan rollback

$28.99

Adams Headwear Trucker Reflector High-Vis Constructed Cap

100% polyester
Constructed, five-panel, mid-profile
Pre-curved visor with low glare grey twill under visor and sweatband
High-visibility color crown with matching color mesh side and back panels
High-visibility contrast color taping with reflective grey center stripe on bottom side panels
Matching color plastic snap closure

$8.08

Actuator 12V Keyless Latch

Please Note: Product Discontinued - ALL SALES FINAL!

$54.99

Miller Control Panel Decal DTU

This is a replacement decal for the control panel on the Miller Industries DTU unit.

$83.99

Miller Control Lever Boot Modular Wreckers

This is a rubber boot for a control lever on any Century or Vulcan modular wrecker by Miller Industries.

$12.69

Century Clevis Pin Carrier Control Handles 5/16" x 1"

This clevis pin measures 5/16" x 1". To view part schematics click on the Brochure tab.

$6.89

Miller Wheel Lift Extend Cylinder Base Pin Century Holmes Vulcan

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

$37.79

Miller Rear Wheel Lift Extend Cylinder Pin Century Holmes Vulcan 5.88" x 7/8"

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

$102.99

Century Control Rod End Cap

This is a Miller Industries control rod end cap. Instead of cotter pins, these end caps hold the control rods in place within the control assembly.

$7.49

Century Carrier Control Rod 77" Anti Tilt 10 / 15 Series 05 and Up

This is a Miller Industries 77" cross rod used in the control assemblies of a 10/15 Series Car Carrier and LCG Series 2005 and newer.

$102.99

Jerr-Dan Rod Controls .75 DIA x 9.00

This is a Jerr-Dan rod, controls .75 DIA x 9.00.

$34.49

Century Carrier Control Rod End Link

This Control Rod End Link from Miller Industries is used on the Control and Crossrod Assembly. It is commonly used on control rods of Century 19' Carriers. This control rod is used with Century 15 Series 2 and 3 Car Carriers, Champion Aluminum and Steel Car Carriers and Vulcan 10 Series Aluminum and Steel Car Carriers.

$42.99

Miller Wheel Lift Upper Arm Pin Weldment Century / Holmes

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the frame weldment. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

$78.99

Miller Control Knob Jack Up / Down Century and Challenger Wreckers

This is Jack Up and Down Control Knob from Miller Industries. It is used on Control Assemblies of many Miller Wreckers that use a Jack control. These wreckers include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

$21.29

Century Carrier Control Rod 77" 10 / 15 Series 05 and Up

This is a Miller Industries 77" cross rod used in the control assemblies of a 10 or 15 Series Car Carrier 2005 and newer.

$80.99

Miller Chevron Air Valve Toggle Guard

This is a replacement air valve toggle guard by Chevron. This guard is used to protect the toggle switch used to operate an air valve on your car carrier bed.

$21.79

Miller Wheel Lift Control Rod Bushing 880 / 890 Series

This is a control rod bushing SSB-625 for the wheel lift on the Vulcan 880 and 890 Series wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

$2.39

Miller Crossrod Bearing C Channel Iron

This is a C-channel end iron used to bear all the control rods and to keep them in line on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

$89.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Holmes 440 Series

This is the Wheel Lift Tilt Cylinder Pin for the Holmes 440 Series / DFT 400 light duty wreckers by Miller Industries. This pin goes through the rod end of the cylinder. This pin attaches the tilt cylinder to the outer wheel lift boom. To view the part schematic click on the Brochure tab. This part can be used to replace Part Number 12-0801010.

$126.99

Zacklift Safety Lock Pin 1-1/4 x 6-5/8"

This is a replacement Zacklift safety lock pin 1-1/4" x 6-5/8".

$122.99

Miller Control Handle Bushing, Vulcan / Century .752" x .879" x .75"

This is a bushing for a control handle on Vulcan and Century light duty wreckers by Miller Industries. It is flanged and is dimensioned at 3/4" x 7/8" x 3/4". See Features for related wreckers and Brochures for reference charts.

$7.29

Century Angle Mount Century Champion and Vulcan Carriers

This Angle Mount from Miller Industries is used on the Control and Crossrod Assembly of Century, Champion and Vulcan Car Carriers. It is used on Century 15 Series and 10 Series Carriers, Champion aluminum and steel Carriers and Vulcan 10 Series aluminum and steel Carriers.

$20.49

Miller Boom Extend Cylinder Rear Pin Century and Challenger HD Wreckers

This is a replacement boom extend cylinder rear pin on the Century 5130/5230 and Challenger CH-32 heavy duty integrated wreckers by Miller Industries. This pin goes through the rod end of the cylinder. It is the pin that connects the inner boom weldment to the boom extend cylinder. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$82.99

Miller Wheel Lift Control Rod 880 / 890 Series

This is a control rod for the wheel lift on the Vulcan 880 and 890 Series by Miller Industries. See Features for related wreckers and Brochures for reference charts.

$40.59

Miller Base End Wheel Lift Lift Cylinder Pin Vulcan 896 / 897

This is the Upper Lift Cylinder Pin on the Wheel Lift of the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the wheel lift tilt column. To view the part schematic click on the Brochure tab.

$81.99

Miller Cross Control Arm Light Duty Wrecker

This is a cross control arm on light duty wreckers by Miller Industries. It is a universal cross control arm for light duty wreckers and is bare metal (no coating). See Features for related wreckers and Brochures for reference charts.

$97.99

Miller Crossrod Bearing Angle Iron

This is an angle iron used to bear all the control rods and to keep them in line on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

$73.99

Miller Pin Upper Tilt Cylinder Homes 220 Snatcher

This is a upper tilt cylinder pin for a Holmes 220 Snatcher.

$110.99

Miller Knob Underlift In / Out Century Wreckers

This Knob from Miller Industries identifies the Underlift In-Out Knob of Century and Challenger Wreckers. It is used on the control assembly of these wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

$17.59

MILLER PIN, EXTEND

$42.19

MILLER REAR CONTROL ROD WELDT

$64.99

Miller Outer Wheel Lift Control Rod 880 / 890 Series

This is an outer control rod for the wheel lift on the Vulcan 880 and 890 Series wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

$69.99

Miller Control Rod Long Extension 5.5"

This is a long extension rod for a control rod on light duty wreckers by Miller Industries. It is 5 1/2" in length and can be used for different applications on a light duty wrecker. See Features for related wreckers and Brochures for reference charts.

$117.99

Miller Short Shifter Valve Rod Light Duty Wrecker

This is a short shifter valve on light duty wreckers by Miller Industries. It is 4 1/2" in length and can be used for different applications on a light duty wreckers. See Features for related wreckers and Brochures for reference charts. This part can be used to replace Part Number 12-0800612.

$118.99

Miller 5 Control Handle Mounting Plate w/ Boot Light Duty Wreckers

This is a 5-control handle mounting plate on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

$181.99

Miller Control Station Guard, Century Wreckers

This Control Station Guard from Miller Industries is used on the body assembly of Century, Challenger, Champion, Eagle and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

$31.59

MARKER LIGHT PLT.AL.CENT T/S

This is a marker light plate with aluminum accents from Miller Industries.

$86.99

Century Control Handle Rod 4 Spool 5/16" x 6 1/8"

This is a Miller Industries control handle rod used in the control assembly of a car carrier. It connects a 4-spool handle assembly.

$15.59

MILLER PLATE-HOSE RETAINING

$26.59

Miller Boom Lift Cylinder Base Pin Century Midnight Express

This is a Boom Lift Cylinder Pin for the boom of the Century Midnight Express by Miller Industries. This is the base end pin for the lift cylinder. To view the part schematic click the Brochure tab.

$45.09

.75 Dia X 13.50 Controls Rod

$47.19

Miller 6 Control Handle Mounting Plate Vulcan

This is a 6-control handle mounting plate on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

$82.99

Miller Base End Wheel Lift Extend Cylinder Pin Vulcan 805

This is the Wheel Lift Extend Cylinder Pin for the Wheel Lift of the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the base end of the cylinder. This pin is used to attach the wheel lift extend cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$118.99

Miller Boom Extend Cylinder Front Pin Century and Challenger HD Wreckers

This is a replacement boom extend cylinder front cylinder for Century and Challenger heavy duty integrated wreckers. This pin goes through the base end of the cylinder and attaches it to the main recovery boom outer weldment. To view the models this pin fits, see Features below. To view the part schematics, see the Brochures tab.

$124.99

Picture of Miller Control Rod Boom Lift 65"

1 - 53 of 53 items