Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This Standard Hardwired Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. A hardwire transmitter can be hardwired into your tow light so you do not have to plug it in every time. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicated the most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
Made for moving on and off the clock, this comfy cocoon cardi offers a relaxed fit and fine French terry fabric. Clean design lines, like a back yoke and integrated pockets distinguish its forward-thinking silhouette.
These powerful 90 lb. pull magnets are all you need to secure your wireless tow light to the load you are hauling. They do not come with a rubber boot for anti-scratch protection.
Towmate's iMon Monitoring System- You will never have to worry about losing your
lights again with this easy to use interactive monitoring System. Operates with
any system equipped with iMon electronics. Purchase with a new unit or upgrade
your existing one easily to work with the iMon.
Monitor the functions of your light bar (LEFT TURN, RIGHT TURN, STOP, and
HAZARDS), be alerted when you leave your light bar behind (signal Strength from
wireless light bar), and monitor the battery level of your light bar all with
one easy to use device. Simply plug your iMon into your vehicles cigarette
lighter and be 100% aware of your wireless light bar abilities and location.
Towmate's "Short Range Monitor" can be mounted in the TM2 towlight to monitor
the signal. If the signal is lost then an alarm will sound to alert you of your
towlight not working properly or you have left it on the vehicle you just
towed.
Use your magnetic tow lights on glass or fiberglass surfaces with these Steel
Plate Suction Cups. Industrial grade suction cups provide a strong surface on
which to mount magnetic tow lights. Once suction cups are applied to the
vehicle, simply stick your magnetic tow lights to the steel plates on top.
This is a stick on pad that goes on the bottom of the 100 lb. magnets on your
tow lights from TowMate. This pad helps prevent scratches and other damage
from the tow light.
Bold colorblocking in the hood and on the sides make this anti-static pullover stand out from the crowd, while Sport-Wick moisture-wicking technology helps keep you cool and dry.
Vinyl covered metal pads allow your magnetic base tow lights to be used on a
vehicle with aluminum or composite hoods, deck lids, or body panels. Secure
by closing window, door, or deck lid. May be used with Zip's tow lights part
numbers SL-9, ZIP-10, or ZIP-10LED.
This Standard 6-PIN Round Transmitter from TowMate is used on TowMate Tow Lights that do not use an external antenna. This transmitter does not have an antenna and the electronics are injection molded to ensure that it will resist the elements. If you are purchasing a transmitter for an existing light, you will want to match the wire colors of the transmitter and receiver. A red wire indicates the newest and most current series of electronics, and a green wire indicates an older style prior to the series of electronics. Please check your wire, and choose your color before ordering.
Protect your Whelen L31/L32 Super LED beacons from low-hanging branches on
residential streets with this Branch Guard Kit. The set includes a new mounting
base with protector and hardware to install the C-shaped brackets perpendicular
to one another. When roof mounted, the kit should keep low-hanging obstructions
from damaging your beacon lens.
Universal clip mount made with steel and rubber which can be screwed into
device or attached via magnetic mount. Can be attached to almost any object
including, hats, belts, bags, tactical vests, molle webbing, backpacks and
more.
Our best-selling Shoreline Jacket has been updated—but it still includes Storm Defender® waterproof, breathable technology to stop water from getting in and allow sweat to get out.
The bonus space on the outside of your hard hat is a great place to add personal lighting from Guardian Angel. This Hard Hat Earmuff Mount makes it easy by clipping into the earmuff slot on most hard hats to provide hands-free task and warning lighting. The mount can also be permanently installed with the two included 10mm stainless steel screws.
These chargers have options of both the AC adaptor or the car charger adaptor. Be sure to choose the correct model fit by checking the feature description.
Synchronize up to six LED units. Fully encapsulated circuitry for vibration and water protection. Permanent, flanged 1" pipe mount base. Include 18"L cable and connector.
Rail Mount Kit for Cab Mounting a Beacon Light Bar. Works well with Ford
F250-F550 Cabs. To Be Used in Conjunction with Light Bar Mount Kits #MXKIT or
#LXKIT.
Buyers Products GuardDogg Mounting Bracket lets you attach a Rotating Spotlight to your GuardDogg Headache Rack. The mounting bracket measures 7.87 " long by 7.87" wide. The mounting bracket features a corrosion-resistant matte black powder coating and mounting fasteners are included.
Buyers Products GuardDogg Mounting Bracket lets you attach Beacon-Style Warning Lights to your GuardDogg Headache Rack. The mounting surface measures 6.5 inches x 7.30 inches. The mounting brackets are sold individually and are designed for universal installation (driver or passenger-side). The mounting bracket features a corrosion-resistant matte black powder coating and the mounting fasteners are included.
Take advantage of the bonus space on your hard hat or safety helmet by adding personal lighting devices from Guardian Angel. Offering a universal fit, this adjustable helmet strap fits all hard hats, fire helmets and safety helmets and features two magnets to attach any Guardian Angel light, including both Elite and Micro devices.
Being on the roadside poses inherent risks for you and your equipment. Increase
your visibility to passing motorists with this pair of auxiliary warning lights
and mounts from Zip s. The powder-coated brackets are easily bolted onto each
side of a cab protector or pylon. The telescoping arms can be adjusted to raise
above the cab and wider than the full width of your vehicle. This feature is
great for use in many states and emergency scenarios but if you re in the
Towing and Recovery industry it is required by the State of Connecticut.
All Guardian Angel Devices come with a built-in magnet which securely attach to
any metallic surface. The Nonmetallic surface 3M adhesive & screw magnetic
mount easily attaches to any nonmetal surface, such as alumnium, fiberglass,
plastic, rubber, wood, etc. Use this mount to easily attach your device to your
motorcycle/scooter, boat, kayak or ATV or any other semi-flat surface.