Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
The Armor Angle from SafeAll is a new poly corner protector for use when uplifting semi trailers. The hard 90-degree plate protects recovery straps from sharp and jagged edges and adds structural integrity to compromised trailer roofs. Each piece includes five holes, three for handling and two circular options to connect bungee cords to hold the strap in place.
Corner protectors are a must for all straps that contact loads. A seemingly dull edge can become a knife when the strap is put in tension. This part can be used to replace Part Numbers: 270412, 270SLEEVE, 38-CP4.
Our new Edge Defender Flex Plus made with DyneemaT fiber woven to provide cut
protection for a variety of edges and surfaces, commonly used with recovery
straps. The 'Flex Plus' is the addition of a double-plied layer of Dyneema
with Kevlar aramid binding. These pads are thinner, lighter, and more flexible
than the standard Lift-All Edge Defender, yet maintain the same level of cut
protection performance. The Edge Defender Flex Plus is well suited for
handling loads with a straight, curved or non-uniform shaped edge, including
coil handling applications.
This Low Profile V-Chain has two 2' legs with an 8" j-hook attached to the end
of each. The pear link that connects the legs also has two grab hooks connected
to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under
carriage of vehicles. By using an oblong link the hook of the winch line is now
in a horizontal plane, with the tip of the hook pointed away from components
that could otherwise be damaged. This reduces the risk of puncturing the
vehicles' oil pan, transmission, valance, bumper, radiator, etc.
Use this aluminum Tailboard Transformer to install a snatch block into the tie
down slot of your carrier bed. Drop it into any hold in your carrier bed and
use it to change the direction of your pull. The Tailboard Transformer is best
used for performing recovery operations such as one lane parallel uprighting.
Designed as a terminator and as a retainer pin.
Built to protect your straps and synthetic slings from damage, this protective Cordura sleeve is sold by the foot. This means that you can get the protective covering you need for your straps. Plus, it’s made in the USA.
Durable is just the starting point for the All-Grip Corner Protector Nylon Web Sleeve w/ Velcro Closure. This nylon sleeve can be placed anywhere on the web body to provide maximum protection. With a 3/16” thickness, it’s tough to penetrate and very resistant to abrasions. Finally, its velcro closure keeps it right where you need it to be.
Protect your 2" tie-down straps with this protective sleeve from Zips. The sleeve features padded material to keep sharp objects from cutting the webbing and an easy placement/removal velcro strip. Each Zips protective sleeve provides 24" of coverage to protect your tie-down straps.
This Low Profile V-Chain has two legs with a r-hook, t-hook and mini j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.
Durable is just the starting point for the All-Grip Corner Protector Synthetic Leather Sleeve with a Velcro Closure. This heavy-duty synthetic leather sleeve can be placed anywhere on the web body to provide maximum protection. With a 3/16” thickness, it’s tough to penetrate and very resistant to abrasions. Finally, its velcro closure keeps it right where you need it to be.
The Guardian Angle by B/A Products provides reinforcement to the corners of trailer or box trucks when up righting overturns with synthetic web slings. This product provides a smooth surface for synthetic web slings to contact and slide allowing the strap to find home when tension is applied reducing the possibility of the strap catching on a 90 degree edge of your typical aluminum angle and rolling it away from the trailer. The rounded edge also helps to eliminate cut or torn straps. This product includes a safety catch strap and ratchet to keep the angle from falling and causing property damage or injury.
The All-Grip Corner Protector Fire Hose Sleeve is extremely durable and made of the same material as fire hoses. While it doesn’t have a rubber liner, this woven polyester sleeve will offer strong protection for your straps against sharp corners and abrasions.
This aluminum angle device is made to place over the corner of a trailer or
truck box to protect the nylon belt from damage and to distribute the lift
pressure over a wide area. Device and a retaining system to help hold the belt
in position. This Protective Rollover Angle measures 42".
This multi-purpose aluminum buckle can be used as a floating shackle; strap shortener and lifting ring. These newly designed buckles incorporate a smaller profile that includes all of the same benefits as the standard buckle adding the ability to tow trailers by the king pin. This technique provides the most stable way to transport empty trailers. In addition it includes shackle holes for winching and snatch block installation. We increased the thickness to 1.25" and built a solid rating for all of your medium/heavy duty needs.
Extend the life of your synthetic sling or synthetic winch line with this adjustable sleeve from RimSling. Available in four sizes, this flexible sleeve features a hook-and-loop closure, so it can be positioned anywhere along the length of the rope or line to provide precise protection.
The Wrinkle Lock is used in conjunction with the WreckMaster Wrinkle, the lock
secures the Wrinkle to the trailer pin in a manner similar to that of the 5th
wheel on a tractor. Properly installed, the Wrinkle Lock makes it virtually
impossible for a disconnect to occur from the trailer pin when a towing
procedure is used. The Wrinkle and Wrinkle Lock are equally secure and works
extremely well when a horizontal or vertical trailer recovery procedure is
used. Wrinkle not included.
This V-Chain has two 2' legs with a 15" j-hook and mini j-hook attached to the
end of each. The pear link that connects the legs also has two grab hooks
connected to it. The pear link provides a dedicated 60 degree pull-point which
not only allows for a higher work load limit but enables a safer environment
for both the operator and hardware, as it lowers the risk of the hook or other
attachment from sliding completely around.
Liftguard Sling Protectors from DICA are engineered to protect slings from
damage caused by direct contact with edges, corners or protrusions of the loads
being lifted. They are magnetic for stable and easy placement for rigging on
raw materials, freight, equipment and other metal objects. All magnets are
slightly recessed to ensure a stay-in-place connection without scratching the
load surface.
The All-Grip Protector Poly Pad is all in the name. Protecting straps against sharp corners is what it’s made to do. This .19” reinforced rubber sheet is meant to protect against abrasions, and it does a good job of it.
Liftguard Sling Protectors from DICA are engineered to protect slings from damage caused by direct contact with edges, corners or protrusions of the loads being lifted. They are magnetic for stable and easy placement for rigging on raw materials, freight, equipment and other metal objects. All magnets are slightly recessed to ensure a stay-in-place connection without scratching the load surface.
Wear pads are required anytime your recovery straps come in contact with an
angle to prevent cuts and fiber lock. Extend the life of your straps. These
super strength high fiber wear pads minimize damage from abrasion and sharp
edges. Closures made for quick and easy installation, even when the straps are
in place.
When you want to protect your straps, you can rely on the All-Grip Web V Strap Protector. This nylon protector comes with a velcro strap to keep it in place.
Tycan Protective Sleeve. This protective sleeve is designed specifically to
protect the Tycan Chain when introduced to a sharp edge or abrasive surface.
The sleeve is 20" in length.
Liftguard Sling Protectors from DICA are engineered to protect slings from
damage caused by direct contact with edges, corners or protrusions of the loads
being lifted. They are magnetic for stable and easy placement for rigging on
raw materials, freight, equipment and other metal objects. All magnets are
slightly recessed to ensure a stay-in-place connection without scratching the
load surface.
There is a high probability that synthetic slings, in direct contact with load
edges, will be cut, resulting in sling failure and possibly death, if sling is
not properly protected. Always using Sling Protection to avoid damage to your
slings and catastrophe. This is the importance of wear protection. Wear
Protection products like wear pads extend the life of slings by reducing
exposure to abrasion and other similar forms of damage. Wear pads also help
protect load surfaces from damage along points of contact, particularly when
used with steel slings. Always inspect slings by following the safety bulletin
provided with each sling.