Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
The Maxxima M42213-A is a 5” X 3” rectangular back-up lamp. It fits industry standard rectangular grommets, such as M49700, and has a standard 3-pin PL-3 connector integrated into the housing. This light features an acrylic lens and polycarbonate housing and is backed by a 5-year warranty.
Maxxima introduces the new 4" A-Series Round Reverse Light. The 4" A-Series is available with either the PL-3 Connector (M42324-A, M42324-AX and M42324-ADV), or DryFit Connector (M42324-ADF). They come with a 5 year warranty.
The LightningS Back-up series light is equipped with Nine 8mm LEDs in a flat
back slim profile design. The LightninS Series utilizes Patent Pending lens
technology exclusive to Maxxima along with standard PL-3 connector. This
extremely cost effective reverse light has been specifically designed for
Fleets' and OEM's.
The M42215 is a 3” x 5” rectangular back-up lamp and turn signal built for style and function. It uses 12 LEDs for the reverse light, while 30 red LEDs around the edge provide a glowing effect and act as the red turn signal. When off, the edge of the lamp appears white for a clean look. It fits standard rectangular grommets like the M49700 and includes a built-in PL-3 connector. The light features a durable polycarbonate lens and housing, and it's backed by a 5-year warranty.
This is a steady burn reverse light, which incorporates the Linear Super-LED and technology. This configuration consists of 12 clear Super-LEDs and a clear
optic polycarbonate lens. The back-up light, with the aid of two screws, has
the ability to be installed as a surface mount warning light. This light
utilizes optic collimators, a metalized reflector, and optic lens for maximum
illumination.
"LED" represent the cutting edge of lighting technology, LED lights operate on
a totally different concept than traditional incandescent or bulb style lights.
Instead of using a brittle metal filament that is susceptible to road shock and
vibration. LEDs are solid-state devices utilizing an electronic chip that is
encapsulated in an epoxy substrate. This design provides increased durability
and a protective seal from road elements like dirt moisture and other corrosive
agents.
This Reverse Light from Hella is used on several Miller Wreckers, including
Century and Vulcan. The light is clear in color and is used on the left side.
See the features below for a list of wreckers and see the brochure tab for
breakdowns.
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicle requirements. Single-diode technology
with Fit N' Forget connection for increased corrosion resistance. Two lamps
required for back-up and must be mounted vertically. Meets specifications for
dome lamp applications.
Buyers Products 5.3 Inch Rectangular Reverse Light Kit with 32 LEDs is used on
trucks and trailers to meet FMVSS/CMVSS 108 regulations. With 32 LEDs, the
light has a clear lens and a standard PL-2 connection. The light kit includes a
PL-2 plug and black grommet.
Backing up in the dark can be a dangerous task. It can be a rough time with two separate obstacles obscuring your vision. With the Ford F250-F450 Super Duty Reverse LED Hitch Bar by Race Sport, that’s no longer a problem. Thanks to its 7-inch LED light with 270 degrees of illumination, you’ll be able to spot whatever’s behind you without any issues.
The New M42206 Series from Maxxima is an Ultra 0.4" Thin Low Profile light that
can be surface mounted with two screws/covering caps or use the optional 3MT
adhesive tape mounting kit. Featuring
polycarbonate lens & housing with fully sealed electronics. Optional 3M
adhesive tape mounting kit sold separately.
Uniquely designed shock mount extends lamp life. Sealed polycarbonate lens and
housing resist heat and impact. Flange and flush mount grommets designed for
mounting in a 4-1/2" hole. Not recommended for dome lamp use. Upgrade to LED
lighting systems using Truck-Lite Super 44 Series products.
Buyers Products 6 Inch Oval Reverse Light with 24 LEDs is used on trucks and
trailers to meet FMVSS/CMVSS 108 regulations. The light has a clear lens and
uses a standard PL-2 connection.
Buyers Products 6 Inch Oval Reverse Light with 10 LEDs is used on trucks and
trailers to meet FMVSS/CMVSS 108 regulations. The light has a clear lens and a
standard PL-2 connection.
Popular on owner/operator show trucks. Uses standard right-angle connection.
24- diode pattern with unique LED array displaying a full pattern light output
design. Epoxy-encapsulated electronics prevents damage from moisture and
corrosion. Less current draw, resulting in increased battery and alternator
life while allowing more power for other vehicle requirements. LEDs have no
filament, therefore are extremely resistant to shock and vibration Two lamps
required for reverse. Legal mounted horizontally or vertically.
This is a 6" oval backup light by Buyers Products. This light features 6 LEDs
and runs on 12 volt power at a .15 amp draw. These lights are recessed mounted
and have a polycarbonate lens.
Buyers Products 4 Inch Round Reverse Light with 10 LEDs is used on trucks and
trailers to meet FMVSS/CMVSS 108 regulations. The light has a clear lens and
uses a standard PL-2 connection.
The LightningS Reverse series light is equipped with Nine 8mm LEDs in a flat
back slim profile design. The LightninS Series utilizes Patent Pending lens
technology exclusive to Maxxima along with standard PL-3 connector. This
extremely cost effective Reverse light has been specifically designed for
Fleets' and OEM's.
Popular on owner/operator show trucks. Uses standard right-angle connection.
Unique LED array displays a full pattern light output design.
Epoxy-encapsulated electronics prevents damage from moisture and corrosion.
Less current draw, resulting in increased battery and alternator life while
allowing more power for other vehicle requirements. Two lamps required for
reverse. LEDs have no filament therefore are extremely resistant to shock and
vibration.
Features robust, cost effective, efficient design. Surpasses back-up
specifications with one lamp, eliminating two-lamp systems. Resembles Super 44
series S/T/T lamp diode appearacne for consistent look. Epoxy encapsulated with
exclusive Fit 'N Forget plug assembly keeping corrosives away from the lamp.
Not recommended for dome lamp use.
Super 44 series back-up light with 54 diodes. The light comes with a lifetime
warranty. Built with a polycarbonate lens and Fit 'N Forget plug connection.
Option of black grommet or grey flange. Grommet and flange kits come with a
Female PL-2 Fit 'N Forget S.S. plug.
This is a 20 White LED 7" Round Reverse Bus Light by Maxxima. It comes with 2
wire lead connection. LED Lighting from Maxxima lasts 10 times longer than
incandescent and drastically reduces power consumption. This light comes
Surface mounted with a standard 4 hole mounting pattern.
Reflector cell technology enhances brightness and reduces sunlight washout. Designed for the vehicle's rugged conditions with "potted", solid state components to protect against shock and vibration and impact-resistant housing to protect against moisture and contaminants. Sealed wire harness.
Reflector cell technology enhances brightness and reduces sunlight washout. Designed for the vehicle's rugged conditions with "potted", solid state components to protect against shock and vibration and impact-resistant housing to protect against moisture and contaminates. Sealed wire harness.
Lights need to be reliable. Luckily, you can count on the JW Speaker LED Heated White Reverse Light to hold up. The transient spike protection safeguards the LED light against electrical disturbances, giving it a longer lifespan. Meanwhile, the IP69K rating lets you know it can stick up in rough environments.
High-impact polycarbonate lens and housing are sonically sealed. Heavy duty
shock mounted bulb. Legal mounted vertically or horizontally. Only one lamp
required to meet federal lighting regulations. Not recommended for dome lamp
use.
Super 44 series back-up light with 27 diodes. The light comes with a 1-year
warranty. Built with a polycarbonate lens and Fit 'N Forget plug connection.
Option of black grommet or white flange with plug kit.
Backing up in the dark can be a dangerous task. It can be a rough time with two separate obstacles obscuring your vision. With the Chevy Reverses LED Flood Lights With Heated Lens by Race Sport, that’s no longer a problem. Thanks to its 7-inch LED light with 270 degrees of illumination, you’ll be able to spot whatever’s behind you without any issues.
Backing up in the dark can be a dangerous task. It can be a rough time with two separate obstacles obscuring your vision. With the Ram Reverses LED Flood Lights by Race Sport, that’s no longer a problem. Thanks to its 7-inch LED light with 270 degrees of illumination, you’ll be able to spot whatever’s behind you without any issues.
4 Inch Round Backup Light with 7 LEDs is used on trucks and trailers to meet FMVSS/CMVSS 108 regulations. The light has a clear lens and a PL-2 connection.