Boom End Sheaves, Guides and Hardware
Showing 60 items
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Zip's Boom Lock Kit Holmes 600 and 750
This is a Boom Lock Kit for a Holmes 600 & 750 Wrecker. This Pin is used to
hold the 2 booms together. You can pull this pin to unlock the 2 booms and
rotate the booms to the side if you have a side pull situation. This kit
includes a plunger pin, spring, and pull grip handle assembly.
$256.99
Zip's Boom Wing Cable Guides, 13" and 16"
This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing
cable guides will help guide the winch cable from the boom end back to the
winch without it hanging down and scratching up your boom. This kit consists of
2 boom wings, one measures 13" and the other measures 16" long.
$35.45
Blue Steel Boom End Yoke Cable Guide Holmes 750 Wrecker
This is a Boom End Yoke Cable Guide for Holmes 750 Wrecker
$312.73
Zip's Boom Wing Cable Guides, 27" and 32"
This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing
cable guides will help guide the winch cable from the boom end back to the
winch without it hanging down and scratching up your boom. This kit consists of
2 boom wings, one measures 27" and the other measures 32" long.
$40.00
Boom Lock Standard Kit Holmes 600
This is the Standard Boom Lock Kit for a Holmes 600 Wrecker. This pin is used
to hold the 2 booms together. You can pull this pin to unlock the 2 booms and
rotate the booms to the side if you have a side pull situation. This kit
includes a plunger pin, spring, and pull grip handle assembly.
$253.99
All-Grip Boom Support Cable 1/2" x 30'
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain. This part can be used to
replace Part Number CF-181.
$104.99
Miller Angle Indicator
This Miller Boom Angle Indicator is standard on all rotators with an Integrated
wheel lift.
$984.99
Blue Steel Mounting Pin Holmes HD Delta Ring 750 and 850 Wreckers
Holmes Mounting Pin for the Heavy Duty D-Ring on 750 & 850 Wreckers. Designed
to be used with D-Ring (Part #MM-12B). Cold rolled shaft with Dimensions of 8
1/2" x 1 3/8".
$76.36
All-Grip Boom Support Cable 7/16" x 20'
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
$55.99
All-Grip Boom Support Cable 3/8" x 38'
There are wreckers and older equipment that still require the use of Boom
Support lines. These cables from All-Grip are the same as factory
replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished
thimbled eye at one end while the other end is plain.
$68.99
Miller Angle Indicator Century 1060
This Boom Angle Indicator from Miller Industries provides the operator with an
exact reading of his boom elevation with only a glance. A standard features on
all Miller Industries Rotators, the Boom Angle Indicator is available as an
option on both integrated and fixed boom heavy duty towing and recovery units.
Mounting hardware is included for easy installation on integrated models, fixed
boom models will require your to drill and tap for proper installation.
$742.99
In The Ditch Removable Wire Rope Guide Cover
The Revolution Boom Head from In The Ditch is a direct replacement for the
Holmes 440, SP8000, SP12000 Side Puller and the Century Midnight Express. This
wire rope guide cover comes off with one hand, allowing for easy wire rope
installation.
$30.49
In The Ditch Boom Head
This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.
$374.99
Miller Cable Follower w/ 1" Hole Chevron 410 and LMD 510 / 512
Chevron replacement cable follower with a 1" hole for the Chevron 410 and LMD
510/512 wreckers.
$231.99
Miller Cable Tie Back Spring Chevron 408 / 410
Chevron cable tie back spring for Chevron 408/410 wreckers.
$87.99
Miller Sheave, 8" x 1-1/2"
This Sheave from Miller Industries has a diameter of 8" and a rim of 1-1/2".
This sheave is used on the Boom Assembly of many Century, Challenger, Holmes,
and Vulcan Wreckers. Please see the brochures tab for a full list of assemblies
and parts schematics.
$195.99
Miller Weldment Century and Vulcan Wreckers
This Cable Guide from Miller Industries is used on the Boom
Swivel Assembly of several Miller Wreckers. These include Century, Challenger
and Vulcan Wreckers. Please see the features below for a list of wreckers and
see the brochure tab for breakdowns.
$342.99
Miller Mounting Pin Miller Small Wrecker Delta Rings
Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.
$26.39
Miller Boom End Sheave 6" Century / Challenger / Champion / Holmes
This is a 6" boom end sheave for many Century, Challenger, Champion and Holmes
Light Duty Wreckers by Miller Industries. See Brochures for part schematics and
Features for related parts and to see what models this boom end sheave will
fit.
$121.99
Miller Delta Ring Small Wreckers
Miller Cast Iron D-ring commonly used with small wreckers including Century
311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin
for Installation (Part #BA0259).
$118.99
Miller Sheave, 1-3/16" Bore, Century Midnight Express and Holmes 440 and 480
This is the Boom End Sheave for a Century Midnight Express Wrecker (2000 -
Current), and it will also fit on the Modular Midnight Express (2010 - Current)
as well. This 1-3/16" Bore Sheave will also fit on the Holmes 440 and 480
Wreckers.
$49.24
Miller Boom End Assembly Century / Challenger / Holmes
The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series
Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.
$489.99
Miller Sheave Housing Assembly Century / Holmes / Vulcan
This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.
$414.99
Miller Boom End Sheave Shaft Century / Challenger / Holmes
This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and
Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference
charts and Features for related parts and wrecker models this shaft will fit.
$66.99
Miller Boom End Sheave Shaft Century and Challenger
This is a replacement shaft that attaches the boom end sheave to the boom end
swivel weldment on Century and Challenger heavy duty wreckers by Miller
Industries. This is the shaft the sheave spins on while the winch cable goes in
or out. To see which models this shaft fits see Features below. To view the
part schematics click on the Brochure tab.
$71.99
Miller Mounting Pin HD Wrecker Delta Rings
Miller Industries Mounting Pin for the Heavy Duty D-Ring (Part #12-0719585) Used On
Century, Vulcan, & Challenger Integrated and Rotator Heavy Duty Wreckers.
$81.99
Miller Delta Ring Heavy Duty Wreckers
Miller Industries D-Ring for Heavy Duty Wreckers. Designed for use with Century, Vulcan, & Challenger Heavy Duty Integrated and Rotator Wreckers. Requires But Does Not Include Mounting Pin (Part #GA0215). This part can be used to replace Part Number MM12B.
$413.99
Roll Pin, 3/16" x 2"
These are the roll pins for the sheave boom yoke shaft on the Midnight Express
by Miller Industries. Click on the brochure tab for a reference chart.
$0.19
Swivel Boom Assembly Century 1140 1130 5030T35 and 7035 Either Side
Note: Special Handling Fees Apply
This is a swivel boom assembly for Century 1140, 1130, 5030T35, and 7035 fits either side from Miller Industries.
This is a swivel boom assembly for Century 1140, 1130, 5030T35, and 7035 fits either side from Miller Industries.
- Fits Century 1140 & 1130/ SDU4 & LDU, 5030T35, 7035 2-speed wreckers either side
$2,094.99
Holmes Boom End 6" Sheave 600 and 500
Boom End Sheave for Holmes 600 & 500 Boom Ends. 6" sheave with 1 3/16" diameter
pin size.
$259.99
Holmes Boom End 8" Sheave w/ 1 3/8" Pin Size 750
This is a Boom End Sheave for a Holmes 750 Wrecker. It is 8" in diameter with a
1-3/8" pin size diameter.
$359.99
Miller Hose Pulley Century 300 EB4 Express Challenger 4300
This is the hydraulic hose tension pulley on the Century 300 Express, EB4
Express, and Challenger 4300 Express Series by Miller Industries. See Brochures
for part schematics and Features for related parts and to see what models this
fits.
$69.99
Miller Boom End Century EB4 and 614
This is a Boom End Assembly for Century Wreckers by Miller Industries. This
boom end will fit the EB4 Express, EB4 6500, Formula 6500 - 600 Series, 614
with a Formula IIT. See Brochures for part schematics and Features to see what
models this boom end fits.
$1,084.99
Miller Boom Sheave Yoke Shaft Century Midnight Express and Holmes 440 HP
This is the Boom Sheave Yoke Shaft for Century Midnight Express and Holmes 440
HP Wreckers by Miller Industries. It will also fit the Century Modular Midnight
Express. This is the Shaft that holds the sheave in the boom end yoke. See
Brochures for reference charts and Features for related parts and what models
this shaft will work with.
$35.45
Miller Boom Sheave Yoke Century Midnight Express and Holmes 440 HP
This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP
Wrecker by Miller Industries. It will also fit on the Modular Midnight Express.
This boom sheave yoke holds the sheave which helps guide your cable from the
winch to the boom. See Brochures for reference charts and Features for related
parts and models this part will fit.
$227.99
Miller Boom End Swivel Assembly, Century Medium Duty
This is a replacement swivel boom end assembly for Century medium duty wreckers by Miller Industries. This assembly will fit the Century 5130/5230, 1624, and 1040B. This part can be used to replace Part Numbers: 12-0900431 and 12-0900432.
$1,758.99
Miller Cable Guide Century 400 600 and Vulcan 806 / 880 / 890
This is the recover boom cable guide for a Century Modular 400 & 600 and also a
Vulcan Modular 806, 880/890 by Miller Industries. See Brochures for reference
charts and Features to see what models this guide will fit.
$19.89
Miller Plunger Pin, Holmes Wrecker
This Plunger Pin from Miller Industries is used on the Subframe Assembly of
Holmes DTU Generation II Wreckers. See the brochure tab for a breakdown.
$36.49
Miller Boom End Swivel Weldment Century HD Wreckers
This Boom End Swivel Weldment from Miller Industries is used on the Boom Swivel Assembly of Century and Challenger Heavy Duty Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Numbers: 12-0800509 and 12-0800510.
$1,064.99
Zacklift Z303/Z353 Cable Guide
Zacklift cable guide with a 6" diameter sheave accommodating up to 3/4" cable.
The Zacklift cable guide can be used in conjunction with any deck winch. The
guide mounts on top of the main vertical section of a Z303 or Z30 Zacklift.
$1,879.99
Miller Inner Stinger Weldment Vulcan 880 / 890 and Modular 880 / 890
Note: Special Handling Fees Apply
This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.
Fits: Vulcan 880 / 890 (03/2008 - Current)
Vulcan Modular 880 / 890 (06/1999 - Current)
This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.
Fits:
$1,689.99
Miller Hose Track Cover Century 300 EB4 Express Challenger 4300
This is the hydraulic hose tension track cover on the Century 300 Express, EB4
Express, and Challenger 4300 Express Series by Miller Industries. See Brochures
for part schematics and Features for related parts and to see what models this
fits.
$65.99
Miller Tensioner Mounting Angle, Century Midnight Express
This is a mounting angle for a cable tensioner on the Century Midnight Express
by Miller Industries. See Brochures for a part schematic.
$143.99
Holmes HD Delta Ring 750 and 850 Wreckers
Holmes Heavy-Duty D-Ring, Cast Iron. Typically used on Holmes 850's and 750's and some
of the larger Century hydraulic wreckers. Requires Mounting Pin (Part
#MM-8B) - Not Included.
$332.73
Miller Tensioner Cover, 810 P/T Boom
This is a replacement tensioner cover for 810 P/T boom from Miller Industries.
$148.99
Miller Boom End Swivel Century / Challenger / Holmes
This is the Boom End Swivel for many light duty wreckers by Miller Industries.
It will fit on most Century, Challenger, Champion and Holmes wreckers. See
Brochures for a reference chart and Features for related parts and what models
this part fits on.
$314.99
Miller Tension Track, Century 300 Series, EB4 Express, Challenger 4300
This is the Hydraulic Hose Tension Track on a Century 300 Express Series, EB4
Express, and Challenger 4300 Express by Miller Industries. See Brochures for
part schematics and Features for related parts and to see what models this will
fit.
$378.99
Miller Hose Pulley Bracket Century 300 Series EB4 Express Challenger 4300
This is the hydraulic hose tension track bracket on the Century 300 Express,
EB4 Express, and Challenger 4300 Express Series by Miller Industries. See
Brochures for part schematics and Features for related parts and to see what
models this fits.
$418.99
Century Bearing Pad Kit Right Approach 19'
This is a Bearing Pad Kit by Miller Industries. It includes all the parts
neccessary to replace the wear pads on a 19' Right Approach Car Carrier. See
Features for a list of parts that are included.
$934.99
Miller Cable Guide Century Modular 300 Series and Vulcan 806 / 807
This is a recovery boom cable guide for the Century Modular 300 Series and
Vulcan 807 and 806 by Miller Industries. See Brochures for a reference chart
and Features for related parts and to see what models this guide will fit.
$26.39
Filter
1 - 60 of 60 items
