Hydraulics
Showing 35 items
Clear all filters
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Century Control Valve 5 Spool
This 5 Spool Control Valve from Miller Industries is used on the Hydraulics
Assembly of many Miller Car Carriers. These include Century, Challenger,
Champion, Holmes, and Vulcan Carriers. See the features below for a full list
of carriers and see the brochure tab for breakdowns.
$1,450.99
Century Control Lever Pressure Gauge 2" LCG Gen II
This is a replacement 2" control lever pressure gauge by Miller Industries.
This gauge has a reading up to 5,000 PSI.
$38.39
Miller 5-Spool Parker Electrical Control Valve
This is a replacement 5 Spool Parker Control Valve for the Vulcan 810 Auto-Load
and the Century Modular Midnight Express light duty wreckers by Miller
Industries. To view part schematics please click on the brochure tab above.
This part can be used to replace part number 12-0306776.
$3,110.99
Miller Parker 4 Function Control Valve
This is a replacement Parker 4 spool valve for heavy duty wreckers by Miller
Industries. This 4 function valve works with most Century and Challenger medium
and heavy duty wreckers. Common uses for this valve are to run your winch
function, recovery boom function, and rear spade function. To view which
specific models this valve will work with please see Features below. To view
part schematics click on the Brochure tab above.
$1,281.99
Century Loop Harness (1-Tray System) Champion and Vulcan 16' 17' and 19' Carriers
Miller Industries' winch loop harness assembly for 17', 16' and 19' Century,
Champion and Vulcan carrier beds.
$399.99
Miller Fitting Connector 3/8" MJ x 1/2" MB
This Hydraulic Fitting Connector from Miller Industries measures 3/8" MJ x 1/2"
MB. It is used on the Hydraulics Assembly of several Miller Car Carriers. These
Carriers include Century, Challenger, Champion, Holmes, and Vulcan. See the
features below for a full list of carriers and see the brochure tab for
breakdowns.
$4.49
Century Hose and Wire Harness 22' 10 and 15 Series Carriers
This is a hydraulic component that contains 2 hoses and all wiring already
preassembled. The hoses measure 3/8" and this harness is for 22' Century 10 and
15 series car carriers. This part supplies power to the main winch.
$401.99
Miller Motor Holmes 220 Wreckers 12V
This 12 Volt Motor from Miller Industries is used on Holmes 220 Generation II
Wreckers. This part can be used to replace Part Number 12-0310867.
$990.99
Miller Elbow Fitting 8 MJ x 8 MB 90 degree
This Hydraulic Elbow Fitting from Miller Industries is used to connect a hose
assembly to the tilt cylinder on the Hydraulics Assembly of Century, Champion,
and Vulcan Car Carriers. See the features below for a full list of carriers and
see the brochure tab for breakdowns.
$9.09
Miller Rubber Fender Well Material
This is rubber fender well material from Miller Industries. This material is sold by the foot.
$27.69
Miller Tee Fitting 6MJ x 6MJ x 4MP
This Hydraulic Tee Fitting from Miller Industries is used on the Hydraulics
Assembly of Century, Champion, and Vulcan Car Carriers. See the features below
for a list of assemblies and see the brochure tab for breakdowns.
$7.19
Miller Elbow Fitting 8MP x 8MP 90 degree
This 90? Hydraulic Elbow Fitting from Miller Industries is used on the
Hydraulics Assembly of Century 10 and 15 Series Carriers, as well as, Vulcan 10
Series Extreme Angle Carriers. The fitting connects one of your hose assemblies
to the bed extend cylinder. See the features below for a list of assemblies and
see the brochure tab for breakdowns.
$13.99
Miller Fitting Connector Male 3/8" x 1/4"
This 3/8" x 1/4" Male Fitting Connector from Miller Industries is used on the
Hydraulics Assembly of several Miller Car Carriers. These include Challenger,
Century, Champion, Holmes, and Vulcan carriers. See the features below for a
full list of carriers and see the brochure tab for breakdowns.
$4.49
Miller Elbow Fitting 3/8" x 1/2" 90 degree
This 3/8" x 1/2" 90? Elbow Fitting from Miller Industries is used to connect
the hose assembly to the winch motor on the Hydraulics Assembly of Challenger,
Century, Holmes, and Vulcan Car Carriers. See the features below for a full
list of carriers and see the brochure tab for breakdowns.
$50.99
Century Control Valve 1 Spool
This is a Miller Industries 1 spool valve body. It is most commonly used on
carriers to control an autoload wheel lift.
$767.99
Miller Valve, 7 Spool-Walvoil Express
This 7 Spool Control Valve from Miller Industries is used on Century,
Challenger and Vulcan Wheel Lifts.
$5,718.99
Miller Connector 1/2" x 1/2"
This 1/2" x 1/2" Connector Coupling from Miller Industries is used on the
Hydraulics Assembly of several Miller Car Carriers. These Carriers include
Century, Champion, Holmes, and Vulcan. See the features below for a list of
assemblies and see the brochure tab for breakdowns.
$6.69
Miller Fitting Connector Straight Century Champion and Vulcan 8MJ x 8MP
This Hydraulic Fitting Connector from Miller Industries measures 8MJ x 8MP and
1/2" SAE x 1/2" JIC. It is used on the Hydraulics Assembly of several Miller
Car Carriers. These Carriers include Century 10, 15, 20, and 30 Series
Carriers, Champion Carriers, and Vulcan 10 Series Extreme Angle Carriers. See
the features below for a full list of carriers and see the brochure tab for
breakdowns.
$6.69
Miller Fitting Connector 8MJ x 8MP Straight Century 10 15 and 20 Series
This Fitting Connector from Miller Industries measures 8MJ x 8MP. It is used
on the Hydraulics Assembly of Century 10, 15, and 20 Series Car Carriers. See
the features below for a full list of carriers and see the brochure tab for
breakdowns.
$6.99
Miller Elbow Fitting 3/8" x 3/8" 90 degree
This 90? Elbow Fitting from Miller Industries is used on the Hydraulics
Assembly of Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See
the features below for a list of assemblies and see the brochure tab for
breakdowns.
$9.19
Miller Fitting Connector Bushing 16MP x 8FP
This Fitting Connector Bushing from Miller Industries measures 16MP x 8FP. It
is used on the Hydraulics Assembly of Century 10, 15 and 20 Series Car
Carriers. See the features below for a full list of carriers and see the
brochure tab for breakdowns.
$9.99
Miller Street Elbow 1" 90 degree
This 1" 90? Street Elbow Hydraulic Fitting from Miller Industries connects to
the 1" hose barb and suction hose on the Hydraulics Assembly of several Miller
Car Carriers. These include Challenger, Century, Champion, Holmes, and Vulcan.
See the features below for a list of assemblies and see the brochure tab for
breakdowns.
$12.79
Miller Hose Barb Fitting 3/4" x 3/4"
This Hose Barb Fitting from Miller Industries measures 3/4" x 3/4". It is used
on the Hydraulics Assembly of several Miller Car Carriers. These Carriers
include Challenger, Century, Holmes, and Vulcan. See the features below for a
full list of carriers and see the brochure tab for breakdowns.
$13.19
Miller Elbow Fitting 3/8" x 3/8" 45 degrees
This 45? Elbow Fitting from Miller Industries is used to connect a hose
assembly to the wheel lift lock valve on the Hydraulics Assembly of several
Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and
Vulcan Carriers. See the features below for a full list of carriers and see the
brochure tab for breakdowns.
$15.99
Miller Tee Fitting Male 1/4" x 1/4" x 1/4"
This 1/4" x 1/4" x 1/4" Male Tee Fitting from Miller Industries is used to
connect a hose assembly to the wheel lift lock valve on the Hydraulics Assembly
of several Miller Car Carriers. These include Century, Challenger, Champion,
Holmes, and Vulcan Carriers. See the features below for a full list of carriers
and see the brochure tab for breakdowns.
$8.99
Miller Swivel Fitting Female Pipe 3/4"
This 3/4" Female Pipe Swivel Fitting from Miller Industries is used on the
Hydraulics Assembly of several Miller Car Carriers. These Carriers include
Century, Challenger, Champion, Holmes, and Vulcan. See the features below for a
full list of carriers and see the brochure tab for breakdowns.
$24.19
Miller Hose Barb Fitting 16 MB 1"
This 1" Hose Barb Hydraulic Fitting is used on the Hydraulics Assembly of
Century, Champion, and Vulcan Car Carriers. The Hose Barb gets connected to a
Suction Hose and a 90? Street Elbow. See the features below for a list of
assemblies and see the brochure tab for breakdowns.
$28.39
Miller Hose Barb Fitting 1" x 1"
This Hose Barb Fitting from Miller Industries measures 1" x 1". It is used on
the Hydraulics Assembly of several Miller Car Carriers. These Carriers include
Challenger, Century, Champion, Holmes, and Vulcan. See the features below for a
full list of carriers and see the brochure tab for breakdowns.
$29.19
Filter
1 - 35 of 35 items
