Toolboxes and Storage

Sort by

In The Ditch GEN 2 Bolt Together ToolBox Top Trays

Introducing the second generation of our toolbox Box Top Tray lineup! These bolt-together Box Top Trays ship and store in a much smaller space. This also allows us to offer replacement parts in case a portion becomes damaged. All these ITD Box Top Trays now come with dividers. Giving you the choice to use them, keep them open, or install them later.

$150.99 – $232.99

In The Ditch Lumber Baskets

These completely redesigned Lumber Baskets from In The Ditch are available in three different lengths: 48", 60, and 70". All of these baskets are 11" tall and 8" deep. Mounting is a snap; just bolt the basket to the back of your tool box with six 5/16" bolts using the pre-drilled holes. In minutes you will have a great place to store extra lumber, tire chains or anything else that you can think of. These Lumber Baskets are made from aluminum and they have drain holes in the bottom that will help them last for decades.

$222.99 – $288.99

In The Ditch Tool Box Mount (Quick Mount)

Note: Special Handling Fees Apply for Specific Items

Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish.

Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes

The Ditch Tool Box Quick Mounts Only (Brackets sold separately)
Works well with new Low Profile Car Carrier Beds
Made from steel with a tuff coat black finish
Sold as each (Not a pair)

Dimensions For Mounts:

ITD-1581- Height: 14 9/16" Width: 7 1/8" Length: 27 3/4"
ITD-1584- Height: 16 1/2" Width: 5 1/4" Length: 32 1/2"
ITD-1588 and ITD-1588-GLV- Height: 18 1/2" Width: 5 1/4" Length: 32 1/2"
ITD-1580 and ITD-1850-GLV- Height: 20 1/2" Width: 5 1/2" Length: 32 1/2"

Please see photos above for extra dimensions

Following Parts Sold Separately:

In In The Ditch Quick Mount Bracket - #ITD-6268
In The Ditch Mount Spacer (Only) - #ITD-6340

$191.99 – $228.99

In The Ditch Heavy Duty Storage Drawers

Ever get tired of reaching into a toolbox or under a counter to pull out a heavy object? Introducing our Heavy Duty Storage Drawers made out of military grade aluminum. These drawers are rated at 500lbs and each slide has a lock in/out position to keep from closing as your trying to place an object in the drawer. We designed this guy to mount on any flat surface with vertical adjustment for various heights. We built a drill template into the tray for ease of installation. It also includes 5 adjustable dividers which allow you to separate your items. These draw systems are offered in 19", 25", 30" and 40" setups.

$365.99 – $434.99

In The Ditch Floor Jack Tray

This Floor Jack Tray from In The Ditch is a perfect solution for storing a Floor Jack on the deck of a wrecker or inside a Tunnel Box. This Tray has a 13" x 26" tray for the jack and a 3" x 26" Tray for the jack handle incorporated into one mount.

$159.99

In The Ditch Full or Half Shelf Kit

These Shelf Kits from In the Ditch are available in three different sizes: 48" 60" and 70". Full length shelves will essentially double the useable space inside of your toolbox. Made from aluminum, these shelves are 14" deep. The shelves actually come as two half shelves with a vertical support, giving you the option to use them as a half shelf or full shelf. All necessary mounting hardware is included and there is no drilled required because of they come pre drilled.

$119.99 – $205.99

In The Ditch Slide In Jack Bracket

This Slide In Jack Bracket from In The Ditch is made from aluminum and it is 13" wide and 25" long, so most floor jacks will slide in easily. This bracket is really going to save your back. Stop wrestling with your floor jack and install this bracket today. Installation is easy; just remove the back panel of the tool box and bolt the Slide In Jack Bracket in using the included hardware kit.

$211.99

In The Ditch Air Line and Wiring Bracket

This Air Line and Wiring Bracket from In The Ditch connects to any tool box to provide a covered channel to run wires out of the tool box for lighting. An airline can also be run through the bracket to provide an easy to access airline connection.

$35.29

In The Ditch Pro Series Slide Out Drawer

This Slide Out Drawer system is a perfect addition to our Pro Series Tool Box by In the Ditch. This system is a great way to get your truck organized. This slide out drawer takes just a few minutes to install using the pre-drilled holes in your Pro Series Tool Box Shelf. This drawer will take all the abuse that comes from day after day use. it is made from military grade aluminum and uses composite slide pads on the drawer. This slide out drawer has a 20 lb. load rating and will work great under tables, shelving, or just about anywhere you can think of adding a slide out drawer. This draw measures 15" wide by 13" deep by 4" tall.

$107.99

In The Ditch Power Locking Toolboxes

In The Ditch Pro Series 18"H x 18"W or 24"H x 24"W Underbody Toolboxes are now available with the Power Lock Remote Control Locking Option. When it comes to making your living with your truck insist on the best, insist on In The Ditch on your next truck. With the introduction of our Power Lock option for our Pro Series Toolboxes you can now easily lock or unlock your toolboxes with just a single push of the wireless remote control. No need to waste time walking around and locking each box, no more struggling to see the lock at night, no more dealing with frozen locks, just push the button it’s that simple. The Power Lock option can also be wired into your truck’s electric door locks, so you can auto lock and auto unlock your Pro Series™ boxes when you unlock truck doors. When you unlock the toolboxes, you can also wire them, so the toolbox lights come on. In the Ditch has been working diligently on ways to make the professional towing operators’ life easier. As a professional tow truck operator your time is valuable and so is your equipment. Don’t take chances with either and insist that your truck gets equipped with In The Ditch Pro Series Tool Boxes with the Power Lock option. Must purchase fob and wiring harness separately.

$866.99 – $2,177.99

In The Ditch Toolbox Dividers

These In The Ditch Toolbox Dividers are the perfect way to organize your underbody box. They are made in several different lengths and come with pre-drilled holes so installation is a snap! Take the time to divide your box so things stay where they belong and not in one frustrating pile. Toolbox Dividers come in five different lengths so we will have one for your box. Get organized today!

$36.89 – $42.49

In The Ditch Workman Series Toolbox

The Workman Series Underbody Toolbox from In the Ditch is a reliable way to store your gear. Set off by a mirror polish finish, the 14-ga. stainless steel door panel gives it a showroom appearance while also being very tough. Plus, the latches and hinges are both made of stainless steel ensuring durability at every point. To protect against corrosion, there is a drip edge and gasket to protect against moisture. Choose your preferred size from the drop-down menu.

Product Highlights

Cost-Effective Solution

Like a lunch box and hard hat, the Workman Series is ready to go to work everyday. Don’t be fooled by the name though. This toolbox is just as effective as similarly-sized toolboxes but at a lower, more budget-friendly price point.

Heavy-Duty Construction

The 0.90 aluminum walls and the 14-ga. stainless steel door means this toolbox will be around for a long time. Rest assured, you won’t have to worry about corrosion compromising the strength and integrity of the box, causing you to replace it before its time. The durable steel hinges will also hold up to repeated door swings.

Professional Appearance

Stand out from the competition with the mirror finish on the stainless steel doors. You've worked hard to build a professional image. Keep it going with highly polished curb appeal.

Weatherproof Design

You’ve invested in quality equipment and tools. Now protect them from the elements with this weathertight box. The integrated drip edge and automotive-style gasket prevents road spray, rain and snow from entering the cavity and causing premature wear and corrosion to your gear.

Secure Storage

Make sure your tools stay put with stainless steel latches and keyed locks. Unlike plastic locks, the 3/16" custom latches are tamper-resistant and provide more secure storage for your expensive tools.

Versatile Sizing

Take advantage of the bonus space under your flat bed or trailer deck. Choose from several different lengths to fit within your wheelbase. The 48", 60" and 70" boxes come with dual locking latches, while the 36" size features a single latch.

Easy Installation

Cut your installation time in half with In The Ditch’s Quick Mounts. Just bolt the steel brackets to the frame rail and hang the toolbox in the frame. No more jacking up the box to install. Four sizes are available to allow for the perfect mounting height.

Flexible & Functional

Your tools of the trade will likely vary from the next guy. That’s why these Workman toolboxes are customizable with shelving, dividers and optional add-ons, like fender storage and box-top organizers.

Please note Workman Series toolboxes do not come with pre-drilled holes, giving you the flexibility to mount them where you want them.

Specifications

Available Sizes

Item #	Length	Height	Depth	Latch Type
ITD25135	36"	18"	18"	Single Locking
ITD25112	48"	18"	18"	Dual Locking
ITD24617	60"	18"	18"	Dual Locking
ITD24620	70"	18"	18"	Dual Locking

Accessories

In the Ditch Workman Storage Box

#ITD-WMSTORAGEB

Adjustable dividers keep tools upright, and drain holes prevent water from collecting and damaging equipment.

In the Ditch Full or Half Shelf Kit

#ITD-SHELFKITS

Customize the interior of your toolbox with this half shelf, creating more organization for smaller tools and accessories.

In the Ditch Heavy Duty Storage Drawers

#ITD-1685

Made from military grade aluminum, these drawers are rated at 500 lbs. to support heavy tools and accessories. Available in four widths, each slide has a lock in/out position to keep from closing as you’re trying to place an object in the drawer.

In the Ditch LED Toolbox Light Kit

#ITD-1728

Add a light so you can see what’s inside your toolbox, no matter the time of day. Thanks to a motion sensor, the timed light shuts off within 15 seconds of door closure, and installation requires no drilling.

$665.99 – $1,081.99

In The Ditch Utility Storage Step

Enhance both accessibility and storage with the In The Ditch Utility Storage Step. Designed for seamless mounting to any In The Ditch toolbox, this 19-inch storage step provides a stable platform to assist with reaching elevated areas while also serving as a secure space for essential equipment.

$249.99

In The Ditch 16in Storage Tray

This 16" Storage Tray from In The Ditch is perfect for storing just about anything. It comes with 6 slots and 4 moveable snap in dividers. It is great for separating and storing screws, nuts, and fittings.

$57.99

In The Ditch Power Lock Install Kit

In The Ditch Power Lock Install Kit is used for the Powerlock Toolboxes. You will need (1) ITD-23467 kit Per truck build that will have the Powerlock Toolboxes on it. This one kit will control up to 12 boxes.

$344.99

In The Ditch Mount Spacer (Only)

By using our Mount Spacer with our Mount Hang Tab (ITD-6268) you will cut tool box installation time in half. With our Innovative Quick Hang Tab you wont have to use jacks any more. Just hang the mount on the frame rail and set the tool box on, its that simple.

$5.79

In The Ditch Drawer Slides

ITD replacement drawer slide left or right hand.

$51.99

In The Ditch Box Top Tray

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

These Box Top Trays from In The Ditch really increase storage for your truck and put things right where you need them. When you lower the deck, everything is out of the way of prying eyes. The Box Tops open bottom design uses the tool box for the base and also allows for drainage. These are a must have for any professional operator's truck. With seven different sizes we will have a Box Top to fit your needs. Many operators mix and match Box Tops to get the length that best fits their needs. All of these Box Tops are made from aluminum and come pre-drilled for easy installation.

In The Ditch Box Top Tray
Choose from seven different lengths:36", 48", 60", 65", and 70"
All Box Tops are 16" wide
Open bottom design uses to the toolbox as the base
Open bottom allows for drainage
Made from aluminum
Pre-drilled for easy installation
Sold as each

Available in the following sizes

Item #	Shelf Kits	Dimensions
ITD-1066	No Dividers	36"L x 16"D
ITD-1121	No Dividers	48"D x 16"W
ITD-1098	No Dividers	60"D x 16"W
ITD-1122	No Dividers	65"D x 16"W
ITD-1067	No Dividers	70"D x 16"W
ITD-1066-D	With Divider	36"D x 16"W
ITD-1121-D	With Divider	48"D x 16"W
ITD-1098-D	With Divider	60"D x 16"W
ITD-1098-D	With Divider	65"D x 16"W
ITD-1098-D	With Divider	70"D x 16"W

$155.99

In The Ditch Mounting plate for Milwaukee Packouts

Take your tool organization to the next level with the In The Ditch Milwaukee Packout Mount! Whether you're outfitting a work truck, garage, toolbox, this mount delivers unmatched adaptability, strength, and scalability. Built for maximum compatibility, it securely attaches to any flat surface that accommodates a Packout system. Its multi-orientation design allows you to mount it on floors, walls, ceilings, or even upside down — giving you total control over your workspace. The built-in interlocking design allows multiple mounts to be connected side by side, so you can scale your setup horizontally across any surface — no limits, no gaps, just a seamless storage system tailored to your space. With pre-drilled holes for pegboard compatibility

$39.99 – $70.99

In The Ditch Pro Series Dolly Box

The Pro Series™ Dolly Box stores everything-2 dollies, 2 axles, a break over bar and ratchet straps-in one cost-effective, ergonomic design built to save your back. Strong enough to stand on, smart enough to bundle with your dolly set.

$2,406.49

In The Ditch Workman Storage Box

In The Ditch® Launches New Workman Series™ Storage Box. Crafted from lightweight aluminum, the Workman Series™ Storage Box delivers the same industry-leading quality as our trusted Workman Series™ Toolboxes, but with an open-top design for quick, easy access. The 14-gauge mirrored finish stainless-steel front panel and aluminum body ensure maximum durability without added weight or risk of rust. The interior features an adjustable divider with multiple positioning options, allowing users to customize their storage layout. Built-in drain holes make cleaning fast and hassle-free.

$556.09 – $663.99

In The Ditch Dolly Drop Down Box (XD Single) Scratched and Dented 2

Please Note: Product Scratch and Dent/Discontinued - ALL SALES FINAL! Items are not eligible for return. View Returns Policy

In The Ditch XD Drop Down Dolly Boxes will save your back from heavy lifting off the deck. The XD drop down dolly box is weather resistant and protects your dollies from snow, ice and road debris. They are easy to use, just pull the aluminum tray out and tilt the tray down. The Box was specifically designed to hold the XD Speed Dolly with 5.70 tires perfectly keeping the hubs and valve stems facing up for easy servicing while in the box. New composite bearings for the sliding/tilting tray were designed to last for years. We also offer a Pro Series Dolly Bunk Kit, ITD-1023 , and a Dolly Box, ITD-1064.

In The Ditch XD Drop Down Dolly Box
Weather Resistant
Protects Dollies from snow, ice and road debris
Easy to use
New composite bearings for the sliding/tilting tray were designed from years
We also offer a Pro Series Dolly Bunk Kit, ITD-1023
We also offer a Dolly Box, ITD-1064
Weight: 80 lbs.
Height: 13"
Width: 18"
Aluminum finish
Sold as each
For use with 5.70 Tires

$863.99

In The Ditch Dolly Drop Down Box (XD Single) Scratched and Dented 1

In The Ditch XD Drop Down Dolly Box
Weather Resistant
Protects Dollies from snow, ice and road debris
Easy to use
New composite bearings for the sliding/tilting tray were designed from years
We also offer a Pro Series Dolly Bunk Kit, ITD-1023
We also offer a Dolly Box, ITD-1064
Weight: 80 lbs.
Height: 13"
Width: 18"
Aluminum finish
Sold as each
For use with 5.70 Tires

$863.99

In The Ditch Dolly Drop Down Box (XD Single) Scratched and Dented 3

Please Note: Product Scratch and Dent/Discontinued - ALL SALES FINAL! Items are not eligible for return. View Returns Policy

Heavy Duty Steel Toolboxes provide superior security, convenience, and protection for whatever you want to store. These 20" tall x 24" deep boxes are great for the newer 102" wide carrier beds and the new Miller Ind. LCG carrier beds.

Toolbox constructed from 10 ga. aluminum with a 14 ga. stainless steel door
Features a unique water resistent door gasket
Stainless steel T-handle latch with lock & key
Automotive rubber bulb seal
4-Sided weather shielded door frame
Unique gusseted, adjustable chain bracket

$863.99

In The Ditch Powerlock Paddle Latch

In The Ditch Powerlock Paddle Latch for customers using the In The Ditch Pro Series Toolboxes and want to convert them over to a Powerlock Toolbox. One kit per box.

$134.99

In The Ditch 16.75" Storage Fender Set, Use w/ 14.5" Quick Mount

This 16-3/4" Storage Fender Kit from In The Ditch includes one right hand Storage Fender and one left hand Storage Fender. These Storage Fenders have polished stainless steel panels and include the mounting hardware.

$506.99

In The Ditch Rubber Guard for Storage Fenders

This Rubber Guard Backing Plate from In The Ditch is used on all of their Storage Fenders. It is used for the left and right side.

$8.99

In The Ditch Pro Series Toolboxes

In the Ditch Pro Series 18"H x 18"D, 24"H x 24"D and 18"H x 24"D Underbody Toolbox. The door on these boxes have a 400 lb rating so you can use it as a step. This series of boxes come with a single latch but has two internal rotary door strikers to keep the door securely closed and sealed from the weather. The In The Ditch Boxes come with pre-drilled holes just pop the plastic plug out of the pre-drilled hole to be able to us all the In The Ditch accessories.

$752.99 – $3,240.79