Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Phoenix electrical junction blocks are high-quality, easy-to-use terminal blocks that allow you to connect multiple electrical sources in your car, truck, trailer, or RV. They feature a two-piece design and are available with a range of poles to accommodate a variety of wiring requirements. These blocks ensure that your wires stay in place and don't contact other leads, keeping all of your electrical devices organized and safe from short circuiting.
These socket and plug adapters will let you change from flat to round wiring
and from 7-way to 4-way function. These adapters are from Custer Products.
Please select which configuration you would like from the drop down above.
These Hi-Amp Circuit Breakers are ideal for cranes, dump hoists, lift gates,
plows, spreaders, switch panels and power distribution panels. Choose from 50,
80, 100, or 150 Amp Circuit Breakers. These circuit breakers double as a master
disconnect as well. In the event of a "short circuit" the circuit breaker will
"trip" to the off position. Unlike an automatic reset, the manual version stays
open until it is manually reset. By pushing the reset button you can also
disconnect the entire system. This is extremely helpful when servicing the
electrical system.
battery stud provides easy identification. "Waterproof" sealant and insert molded studs on waterproof breakers make them suitable for marine applications and trailer connections. 12 VDC. Meets applicable SAE J553 requirements. Each circuit breaker includes two #10-32 nuts.
This 10 Post Junction Box from Miller Industries is used on the assembly of
many different Car Carriers and Wreckers. It is used on Century, Champion,
Chevron and Vulcan Car Carriers, as well as Century, Challenger, Eagle, Holmes
and Vulcan Wreckers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
"TouchTek 6" Switch Panel can control up to six 20-amp capacity relay
functions. The control panel is small and easy to mount at only 4" x 2 5/8" x 1
1/8". The PDC (Power Distribution Center) can be remotely mounted for ease of
installation. Selectable switching behaviors for all switches on the panel
include momentary, latching, sequencing, or non-sequencing modes. Switching
mode is easily selectable through "DIP" switch settings in the PDC.
Multi-conductor cables generally carry audio, control, and instrumentation signals via a wide array of options. Multi-conductor cables are very similar to multi-pair cables, differentiated by the pair qualification.
The Auxiliary Power Protector, has the capability to handle the electrical
systems of standard and foreign trucks in one single model. The converter is
the heavy duty type that is built into the circuit board at Power Up Products.
This makes installation a breeze.
This is an enclosed housing switch panel from AW Direct. The switch panels are
20 amp rated and come in three sizes: 2 switches, 4 switches and 6 switches.
Due to precise operation in extreme heat or cold, these Series A Circuit
Breaker Switches from Power Up Products have become the vehicle industry
standard for control. They provide extreme reliability in system circuit
protection. These units can be reset by simply turning the switch off and back
on again.
Plug socket contacts complete the electrical connection of the AT Series plug
housing assembly. There are three different quality grades of contacts
available. All feature a copper alloy base with a standard stamped/formed
nickel plate, military solid crimp nickel, or gold-plate.
Going camping for the weekend? Make sure your truck s lighting system is up to
the challenge with this replacement 7-wire female RV plug. This screw-type
socket is primarily used in RV applications and includes seven flat blades. The
plug is constructed of molded PVC for impact resistance.
Engages electric motor for operating the hydraulics. Solenoid engages electric
vented (BAM24) and enclosed (BAM44) motors to operate hydraulics on auto
transport trailers.
Rubber boot with 15/32" thread, used with 15/32" mounting stem. Provides
protection from weather conditions. Provides protection from harsh weather
conditions.
Always have the right lighting connection for the trailer you are pulling or towing with your wrecker or car carrier. New from TowMate, the Adapta-Box offers four popular trailer wiring receptacles, so you can use the trailer’s factory marker lights and stop/tail/turn signals while moving through traffic.
Allows one person to test both male and female 7-round pin tractor-trailer plugs and more. In addition, the tester allows you to jump current to a dead circuit during emergencies so you can still drive your rig. Includes an extra jumper connector. It allows the jumping of current to a dead circuit for emergency situations so you can still drive the rig.
Universal Switch Panel, with all switches factory wired and ready to install.
This good-looking panel has enclosed housing, replaceable legends,
and LED backlighting. The biggest advantage of this panel is the circuit
breaker switch(s). Each individual switch protects itself with its own internal
circuit breaker. The new design allows this panel to be upgraded to a 5 or 6
switch panel just by adding switches and legends.
This is a Miller Industries 4-Way Socket. All sockets and plugs have contacts
that float for proper connection with mating receptacles. The terminals will
accept up to 12 gauge wire. A cable clamp will hold just about all cable sizes
firmly.
This heavy duty replacement Rocker Switch has a light on the switch. The face
is 1" wide and 1-5/8" long. Choose from several colors, including, red, blue,
green, white, amber, and red/amber.
The XGC4 56-Watt Power Adapter is a power supply for rapidly recharging NOCO
Genius Boost Ultra Safe Lithium Jump Starters. It safely recharges NOCO Genius
Boost Ultra Safe Lithium Jump Starters up to five times faster than traditional
USB wall or car chargers.
Get the Goodall Start All Jump Pack by Vanair 5,000A and never worry about a dead battery again. This powerful 12V device is a game-changer when it comes to jump-starting vehicles and other equipment. With an impressive power output of 5,000 amps and a whopping 66,000 Joules of energy in just 5 seconds, this jump pack packs a punch.
Buyers Products 7 terminal junction box provides an organized way to
terminate and consolidate your electrical wiring. Choose from 2 optionsa
polypropylene box with seven plain terminals or an ABS plastic box that
features seven color-coded terminals.
Similar to PCC6W, this switch box from Whelen offers six lighted, 25-amp SPST
switches, except the last on/off switch is replaced with a momentary switch.
Universal Switch Panel, with all switches factory wired and ready to install.
This good-looking panel has enclosed housing, replaceable legends,
and LED backlighting. The biggest advantage of this panel is the circuit
breaker switch(s). Each individual switch protects itself with its own internal
circuit breaker.
Switched Receptacles allow you to plug 12V DC accessories into the 15A receptacles once and conveniently switch them on and off at one location. Lighted switches indicates which accessory is in use so you know at a glance which accessories are on. Receptacles are
housed in black vinyl-coated steel. Options :Single Outlet is 3"L.Double Outlet is 4-1/4"L.
Bright colorblocking on the hood and sleeves adds sport appeal, while the 2x2 rib knit details make it modern. Colorfastness and minimal shrinkage means this soft sweatshirt will keep its great look and fit.
Features six mini rocker switches with red LED indicator lights. Includes switch box with universal bracket, mounting hardware, switch labels and 18"L pigtail with insulated quick connects for termination.
Custom In Dash Switch Panel, with all switches factory wired and ready to
install. This good-looking in-dash panel has finished face plate, replaceable
backlit legends, and lighted circuit breaker style switches. 1999 to current
Ford F350/450/550, mounts in the coin box.
With 50 percent more harness ports, alleviates the need for multiple boxes,
while allowing for the addition of more harness systems and increased lighting
needs. Larger box makes it easier to work on internal connections. Clear lid
offers easy viewing of connections without having to remove lid, saving time
when trying to identify lighting system problems. Dual ''Dog bone'' ground
strap feature allows 4 terminals to be common, replacing the need for multiple
junction boxes, offering additional cost savings. Silicone gasket on lid helps
to eliminate damage from moisture and corrosives within the box, reducing
costly repairs. Made of high impact, chemical resistant, approved insulating
plastic providing a long service life and eliminating the time and money needed
for repair and replacement. Mounted by four eyelet-reinforced holes in base of
box for increased durability. Contains 12 pre-tapped holes to accept
compression fittings or filler plugs allowing for greater configuration
versatility. Uses 50 Series compression fittings or 50830 filler plugs (6
included in kit).
12V DC Single pole, single throw latching, non-momentary rocker switch 5/8"H x 1-1/8"W x 1-1/2"D 20A 5-prong rocker switches for sw
itch panels SWP20, SWP30, SWP40, SWP60, SWT4A and SWT4B. 40A 5-prong rocker switch for switch panels SWP20, SWP30, SWP40, SWP60, SWT
4A and SWT4B.
With strategically placed mic clips and dual pen pockets, our tactical polo is designed for event staff, security and law enforcement. Built for performance, this snag-proof, moisture-wicking, odor-fighting shirt will keep you sharp and professional-looking on or off the job.
Ez Connectors R7-05 serves as the vehicle end of the original EZR7 product line and also functions as a dummy plug. It is designed for hard wire installation on the bumper of the vehicle. The unit includes 2 feet of cord on the vehicle, a mounting bracket, a dummy plug, butt connectors, sealant-type heat shrink tubing for a waterproof splice, and a tie wrap for securing it to the vehicle. When connecting, you remove the dummy plug from the vehicle socket and place it in the trailer plug holder.
Whether you need a switch for a light bar or anything else in your vehicle, these 12V Illuminated LED Rocker Switches are an economical option for integrating additional lighting or 12V equipment into your vehicle with ease. They come in an assortment of colors to suit any style.
The EZ Connector R7-07 is the trailer end of the EZR7 product line. It includes 4 feet of cable, a plug holder, butt connectors, sealant type heat shrink tubing for a watertight splice, and a heavy-duty tie wrap to secure the cable to the tongue.
This amazing new 8-Button Digital Switch Panel from Race Sport Lighting features some amazing switching capabilities for your complete lighting systems. Our new RS8BASP can control up to 8 auxiliary lighting systems and comes with a logo sheet to pick out the labels you want for the set up. The Panel is an Ultra slim touch design for easy installation in the sots you want in the vehicle. The blue indigo LED lighting is a nice touch on the face with the voltage meter displayed right in the middle of the panel to gauge your total voltage in the system. Run up to 30Amp Auxiliary lights on this system on the high amperage switches.Bonus - Hit the Button once, and turn the light on, hit the button twice and make any light strobe!
This 8 Bank Air Solenoid from Miller Industries is used on the assembly of
Century 1040B / SDU3 Heavy Duty Wreckers. See the brochure tab for breakdowns.