Slings

Synthetic endless round slings are lightweight and pliable for easy rigging and storage. They are made from polyester yarn covered by a double wall tubular jacket. They are seamless and have a soft cover that won't scratch a load's surface. Slings are color-coded for different capacities to be more convenient when you need to make a fast decision on the job.

These B/A Synthetic Super Slings are super strong, versatile and are offered in 4 sizes to suit your individual needs. They are an endless loop style with a full length floating protective sleeve that provides protection against damage and wear to the sling.

These Grade 70 Chain Assemblies are 5/16" and include a 15" j-hook at one end and a grab hook and mini j-hook on the other end. The forged, heat treated steel has excellent wear and abrasion resistance.

Corner protectors are a must for all straps that contact loads. A seemingly dull edge can become a knife when the strap is put in tension. This part can be used to replace Part Numbers: 270412, 270SLEEVE, 38-CP4.

These Zinc Plated 5/16" X 8' Chain assemblies include a Grab Hook,Mini-J, & T-Hook at one end and a Long J-Hook at the other end for hook up options.

This grade 70 Ultimate Axle Chain is 5/16" x 3' and comes with a grab hook on one end and a 8" j-hook on the other end. The Ultimate Axle Chains allow you to quickly and easily chain up forward axles of tractors when performing a rear tow. Also check out part number

These chain assemblies come equipped with a Twist Lock Grab Hook connected at one end of the chain. Some standard uses for this assembly are chain to chain hooking, equipment safety, tie-down, over-the-road safety and vehicle stabilization, but this style of hook is not for overhead lifting. B/A's patented Twist Lock design is easy to install and easy to use. It has the most secure latch on the market which prevents accidental release of the chain from the hook connection and inadvertent re-hooking. These hooks can be used in place of slip hooks.

Note: Special Handling Fees Apply for Specific Items

These Grade 100 chain assemblies include a Non-Cradle Grab Hook at each end for length adjustability. Grade 100 has excellent wear a nd abrasion resistance. These Chain Assemblies are come in Hi-Vis Yellow to help keep your recovery scene safe.

• Grade: 100
  
  Available in the following sizes
  
  

  Size	Size	Working Load Limit
  11-38G1010NCG-HV	3/8" x 10'	8,800 lbs.
  11-38G1020NCG-HV	3/8" x 20'	8,800 lbs.
  11-12G1010NCG-HV	1/2" x 10'	15,000 lbs.
  11-12G1020NCG-HV	1/2" x 20'	15,000 lbs.

This Low Profile V-Chain has two 2' legs with an 8" j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.

These Grade 100 Chain Assemblies come with a Twist Lock Cradle Grab Hook attached to each end of each chain. B/A's patented Twist Lock design is easy to install and easy to use. It has the most secure latch on the market which prevents accidental release of the chain from the hook connection and inadvertent re-hooking. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting. These chain assemblies are Hi-Vis to make it safer at a recover scene.

These B/A Synthetic Super Slings are super strong, versatile and are offered in 4 sizes to suit your individual needs. They Have an Eye on each end and have a full length floating protective sleeve that provides protection against damage and wear to the sling. Please Note: Product Discontinued - ALL SALES FINAL! Discontinued items are not eligible for return. View Returns Policy

B/A's recovery straps are the premier straps in the industry. Made from double ply webbing, they offer the best in strength, yet this soft pliable webbing conforms and supports the load - making your recovery job easier. All straps are made with heavy duty polyester and have lined eyes for superior wear protection.

This Low Profile V-Chain has two legs with a r-hook, t-hook and mini j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.

The Guardian Angle by B/A Products provides reinforcement to the corners of trailer or box trucks when up righting overturns with synthetic web slings. This product provides a smooth surface for synthetic web slings to contact and slide allowing the strap to find home when tension is applied reducing the possibility of the strap catching on a 90 degree edge of your typical aluminum angle and rolling it away from the trailer. The rounded edge also helps to eliminate cut or torn straps. This product includes a safety catch strap and ratchet to keep the angle from falling and causing property damage or injury.

Please Note: Product Discontinued - ALL SALES FINAL!

The highly durable 12" Steel Triangle is an excellent addition to nearly any type of vehicle recovery job. Offering optimal reliability for where you need it the most, this durable piece of yellow zinc steel is more than capable of providing you with exactly the kind of strength you need to get the job done right. It can easily handle a working load limit of 32,000 lbs., making it a great tool to have around for the vehicle towing job.

This round sling kit is perfect when you can't use chain in the wheels. This kit includes four 4 foot green round slings, four Cordura sleeves and four round sling hooks, to pass through rims of larger vehicles creating a terminal connection.

This V-Chain has two 2' legs with a 15" j-hook and mini j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. The pear link provides a dedicated 60 degree pull-point which not only allows for a higher work load limit but enables a safer environment for both the operator and hardware, as it lowers the risk of the hook or other attachment from sliding completely around.

This Heavy Duty Chain Kit from B/A Products is for all of your rigging and recovery needs with Heavy Wreckers, but it also has many other uses as well. The kit includes 5/16" and 3/8" Grade 80 Chain, 1/2" Grade 100 Chain, and two 5/16"-3/8" Grade 100 Ratchet Binders. These chains offer high working load limits and are certified for overhead lifting.

This chain assembly comes equipped with a Twist Lock Grab Hook connected on each end. Some standard uses for this assembly are chain to chain hooking, equipment safety, tie-down, over-the-road safety and vehicle stabilization, but this style of hook is not for overhead lifting. B/A's patented Twist Lock design is easy to install and easy to use. It has the most secure latch on the market which prevents accidental release of the chain from the hook connection and inadvertent re-hooking. These hooks can be used in place of slip hooks.

This is a 5/8", Grade 100 chain kit by B/A. This kit includes (2) 10' long chains and (2) 15' long chains. Both sets of chains have cradle grab hooks on each end.

B/A's recovery straps are the premier straps in the industry. Made from single ply webbing, they offer the best in strength, yet this soft pliable webbing conforms and supports the load - making your recovery job easier. All straps are made with heavy duty polyester and have lined eyes for superior wear protection.

This is a 4" plastic corner protector from Miller Industries.

Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy. B/A's recovery straps are the premier straps in the industry. Made from single ply webbing, they offer the best in strength, yet this soft pliable webbing conforms and supports the load - making your recovery job easier. All straps are made with heavy duty polyester and have lined eyes for superior wear protection.

• Size: 6"
• Length: 30'
• Eye Width: 3"
• WLL, Vertical: 16,300 lbs.
• WLL, Choker: 13,000 lbs.
• WLL, Basket: 32,600 lbs.

Please Note: Product Discontinued - ALL SALES FINAL!