Lifting, Rigging and Recovery Equipment

Zip's snatch blocks with a swivel shackle and 30 inches of chain provide versatility for tow operators at a recovery scene. The combination chain, snatch block and grab hook help change the direction of the tow or gain an advantage over the disabled vehicle. See the drop-down menu for available sizes and working load limits.

Zip's high-quality, low-cost snatch blocks are available in four rope sizes with working load limits up to 30,000 lbs. These blocks also feature a spring-loaded latch that adds a layer of safety to the recovery scene. See the drop-down menu for available sizes and working load limits.

Zip's high-quality, low-cost snatch blocks are available in three rope sizes with working load limits up to 16,000 lbs. These blocks also feature a swivel shackle that increases its versatility at the recovery scene. See the drop-down menu for available sizes and working load limits.

Zips Snatch Block replacement latch kits. The kits are available in seven sizes. See the drop-down menu for available sizes.

Zip's Snatch Block Storage Bracket. Designed specifically for the snatch blocks to be stored by the hook. The bracket can typically store up to 4 blocks at a time. 17.5" Long. Heavy Duty Aluminum Construction. Bolt-on installation.

This is a Zip's Custom aluminum snatch block and chain bracket. This bracket allows you to customize your toolbox to make you more efficient. This is a simple bolt-on bracket that has a variety of uses. It can hold your snatch blocks, your chains, or both. This bracket is 16" long.

Zip's 48" wooden recovery stick features an angled end for optimal positioning.

Zip's Built Spreader Bar Brackets store your spreader bar on top of the body sides of your heavy duty wreckers. They make securing your spreader bar easy with the use of bungee cords. The bungee cords are not included.

Zip's designed this steel tubular pylon to bolt onto In The Ditch s SP9000 Side Puller. Front oval cutouts accommodate marker lights on the driver and passenger side, and rear cutouts include stop/tail/turn lights and holes for three clearance lights. The wide surface area also provides a mounting platform for additional beacons and warning lights. Access holes on the underside aid in wiring. The pylon measures 102 wide and can be seen around vehicles loaded on the deck of a car carrier.

Wheel Lift Anchor Spade, Holmes DFT-200. The wheel lift spade is designed to fit over the outer tube of the wheel lift and use the downward force of the wheel lift to anchor the truck while winching.

Zip's Custom Hydraulic Rear Stiff Leg Kit. Designed for add-on installation on 12 ton or smaller light wreckers. Will fit on either conventional or self-loading small wreckers. Zip's custom legs features a compact design with an extra wide flipper foot. The kit includes hydraulic legs, flipper foot, built in tie-back anchor, low pull D-ring, electric control valve, wired lanyard controller. *Mid-Leg D-ring is available but NOT included in kit.

The Zips/Sava High Pressure Lift Bag Kit is used to lift the heaviest loads. This bag kit use maximum force in concentrated areas allowing for the user to work in tight spaces.

Zip's Standard Pylon For Miller Industries Side Pullers, Includes Two (2) Rear Facing 4.5" x 6" Oval Openings, and Two (2) One Each Side - 2.5" Outward Facing Openings, Away From The Side Of The Truck on The Left And Right Side. Measures 4.5 x 6 and has stop-tail-turn and marker light holes.

Zip's Built Spreader Bar Brackets store your spreader bar vertically on the body of your heavy duty wreckers. They make securing your spreader bar easy with the use of bungee cords. The bungee cords are not included.

When recovering a vehicle with a car carrier rollback, the Zip's Side Puller Recovery Tool allows your truck to remain parallel with the road and keeps traffic flowing, taking up less roadway with winch angles off the rear of the deck. The Zip's Side Puller Recovery Tool has a unique design that allows the operator quick and easy usage - no installation labor required! It can be locked into position utilizing the standard key slot holes along the rear approach plate on all Miller Industries 10, 12 and 16 Series STEEL car carriers. It is secured in place with a hitch pin and hairpin cotter pin.