Towing Tools
Showing 75 items
Clear all filters
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Miller Bus Lift Eye Attachment
The 124002634 Lift Eye Attachment is designed for front lifts on many models of the RTS, GMC, and NOVA buses and rear picks on the MCI-9. The rear eye on an MCI ,GL, and GL3 series can be utilized for a rear pick. The eyelet that is bolted on to the jack pad point on many RTS, GMC, and NOVA buses is pinned into the lift eye attachment for a front pick.
$367.99
–
$877.99
Miller Short Axle Fork - 5" Wide Opening
This Short 5" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 5" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.
$253.99
–
$445.99
Miller Medium Axle Fork - 5" Wide Opening
This cast steel alloy Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. Making these forks from one piece of cast steel has increased the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 5" wide opening, 2" diameter shaft and has a 6-1/4" clearance between the fork holder and the bottom of the fork cutout.
$268.99
–
$472.99
Miller Dual Fork Receiver Set
Miller Industries newly redesigned and field-tested dual fork receiver set offers heavy-duty tow operators the advantage of four fork positions on their crossbars, allowing them to achieve the desired clearance and weight distribution on their underlifts during front-pick tows.
$2,499.99
–
$4,013.99
Miller U-Bolt Lifting Attachment Set
This U-Bolt Lifting Attachment is designed for faster and easier rear hookups on many tractors. The attachment is centered on one of the rear U-bolts on each side and then the underlift is raised. The U-bolt attachment lifts on the bolt saddle while the U-bolt and nut guide it into position. These attachments are designed for Rear Lift Only. 1 Pair Included in Kit.
$628.99
Miller Tall Axle Fork - 5" Wide Opening
Cast Steel Alloy Forks from Miller Industries are used when clearance is needed on a vehicle with a low front end. These forks are made in one piece using a special cast steel process. There is a 5" wide opening at the top of the fork and the shaft has a diameter or 2". There is a 9" clearance between the fork holder and the bottom of the fork cutout. The yield strength has been increased while making them almost 30% lighter than the old fork designs.
$346.99
–
$617.99
Miller 5" x 5" Crossbar Riser Bracket Set
These Riser Brackets from Miller Industries are used when extra height is needed while towing. The riser brackets are manufactured in a welded design and incorporate a 1/2" grab hook welded to one side. With these brackets you will gain an extra 8.5" of height. Brackets will fit on a 5" x 5" heavy duty crossbar. These Riser Brackets are standard on 9055, Option for FIIIT, SDU, 5130, 5230 and 7035. Storage brackets for these riser brackets are not included.
$1,346.99
Miller Offset Chain Hook Adapter Version 2 for Dual Fork Holders
Miller Industries has improved the design of its offset chain hook adapter by adding a second pin for stability and reinforcing the chain hook block for additional strength. This updated version now slides into two holes on a heavy-duty fork holder found on 5" x 5" crossbars on Century, Vulcan and Holmes underreaches.
$1,296.99
Miller Universal Fork Holder, 3.5"x4"
Miller offset fork adapter for 3.5" x 4" crossbars. This fork adapter is commonly used on Vulcan V30 Wreckers.
$736.99
Miller Chain Hook Adapter Set
Miller Industries chain hook adapter kit. These chain hook tow bar adapters are specifically designed to fit the cast profile fork holders of Century and Vulcan Heavy Duty Wreckers. They are used when lifting a load when chains are required. For more versatility they may moved back and forth on the crossbar to fit the size of the load being picked up. Sold as a pair.
Â
$1,029.99
Miller Heavy Duty Tire Lift Attachment Crossbar
To expand your lifting capabilities your Century can be equipped with the optional wheel lift grid system. This system is available to fit the 4", 5", and 6" crossbars. It is capable of towing vehicles from both the front and rear axles, in either single or dual tire applications. It offers versatility, with a wide range of adjustment for nearly all sizes of tire, as well as axle widths.
$5,141.99
–
$5,828.99
Miller Fold Down Bus Lift Storage System
This Miller Industries Tire Lift Storage Bracket folds down for easy access to either Part Number
$1,009.99
Miller Fifth Wheel King Pin Adapter 16 Ton Wreckers
This is a Miller Industries Pintle Hook and Fifth Wheel Adapter Kit. It is designed specifically for Miller 16 ton wreckers including the Vulcan V-30, Century 3212, Vulcan V-24 and Holmes 600R. It fits a 3" x 4" crossbar.
$1,949.99
Miller King Pin Tow Plate / Trailer Recovery Loop
This King Pin Tow Plate Recovery Loop from Miller Industries was designed to be attached to the fifth-wheel pin on a large trailer so that it can be towed without the presence of a tractor. Slide the plate on to the pin, attach your chains, secure them to your sling and lift. Use your safety chains anytime you are towing for maximum security and safety. This part has replaced part number 124001674.
$319.99
Miller 4" x 4" Crossbar Riser Bracket 8" Lift
This riser bracket is for a 4" by 4" crossbar used on a Century 3024 and 4024. They accept most 2" diameter forks and are used when extra height is needed for towing.
$605.99
Miller Fork Adapter for 3" X 3" Crossbar Fork Holder
This is a replacement 3" x 3" fork adapter.
$371.99
Miller Reese Receiver Adapter (Gen 1 Car Carrier Wheel Lifts)
This Reese Receiver Wheel Lift Adapter from Miller Industries is used on Car Carriers. This removable adapter is specifically designed to be mounted on Miller's Century, Champion, Chevron and Vulcan conventional Car Carrier Wheel Lifts, which have the built-in ball hitch receiver. This 2" universal receiver accepts and pintle or ball hitch with a 2" tube. It is accepted on 10 Series, 12 Series LCG and 16 Series LCG GEN1 built before Sept. 2016 standard wheel lifts. All of the mounting hardware is included on this adapter. For a complete
Pintle Hook Receiver Kit see part # ZP-CC-PHK. This part can be used to replace Part Number 12-0809073.
$540.99
Miller Trailer Ball Kit
The Century trailer ball adapter kit is designed for Century car carriers that have the ear welded on the back side of the crossbar. The kit includes a 2" ball and a wrench for installing and removing ball.
$84.99
Miller Offset Fork Holder Set for 4" x 4" Crossbar
These Low Profile Fork Holders are designed to fit a 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products . This fork holder set includes the right and left hand sides.
$2,298.99
Miller Medium Offset Axle Fork Set - 6" Wide Opening
These 7.25" Medium Round Axle Forks from Miller Industries are used to pick up the axle or frame of a truck. They have a 7.25" wide opening, 2" diameter shaft, and 6.5" between the fork holder and the bottom of the cutout.
$582.99
Miller Ball Bracket Trailer Hitch Adapter (Century F6500 / DFT-650)
This Trailer Hitch Adapter from Miller Industries is used on a Century Formula 6500 and Holmes DFT-650 Wheel Lift. It allows you to tow a trailer with a ball type hitch behind your wheel lift. This adapter installs quickly and it is small enough to fit in your toolbox when it is not being used.
$382.99
Miller Forklift to Wheel Lift Attachment
The Eagle Fork-lift Attachment. Fast, damage free, car moving machine. Turns a forklift into a fast efficient yard truck! Move cars quickly from parking spots, within storage yards or salvage lots. All you need is a forklift. Just slide the forks into the receivers and you are ready to go. No hydraulics just a simple rotating mechanism which wraps around the car tires!
$6,289.99
Miller Chain Hook End Caps (4024), 4" Crossbar
Miller Industries Hook End Cap. Fits a Century 4024 Wrecker with a 4" crossbar.
Sold as Pairs.
$726.99
Miller Riser Bracket
This Riser Bracket is standard on all rotators and optional of all other models. This riser bracket fits on a 4" crossbar. Sold as pair.
$1,148.99
Miller 16 Ton Fifth Wheel Assembly
This fifth wheel assembly from Miller Industries is used with 16 Ton Wreckers Pintle Hitch Adapters. This kit includes quick pin, handle grip, linch pin, 5th wheel bracket, lock pin and pivot pit adapter.
$862.99
Miller Trailer Hitch Adapter Ball Bracket Formula I
This Trailer Hitch Adapter from Miller Industries is used on a Century Formula I Wheel Lift that was made after March of 1996. It allows you to tow a trailer with a ball type hitch behind your wheel lift. The Hitch installs quickly and it is small enough to fit in your tool box when it is not being used. Also fits a Holmes DFT-400 and Challenger I-400 Wheel Lift.
$382.99
Miller 25,000 lb. (50 - 75 Ton) Tire Lift
Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator
Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and
Recovery units (5" x 5" Crossbar). This New Tire Lift (124002808) Will Include
The Upgraded Crossbar (124002838) When Ordered On With A New Wrecker Unit.
$6,716.99
Miller End Cap Chain Adapter (16 Ton Wreckers)
Miller Industries End Cap Chain Hook Adapter for Vulcan V30, Century 3212, and Holmes 600R 16 Ton Wreckers with low profile 3" x 4" crossbar.
$384.99
Miller Medium Duty Truck Hitch
This Medium Duty Truck Hitch from Miller Industries has superior strength and durability. This might be the best tow bar design ever because it incorporates the use of extra-large spacer bars, a smooth faced crossbar and cam locks on the spacer bars for easier use. The crossbar comes with 1/2" grab hooks at the end for extra heavy duty lifting, and 3/4" shackles for attaching your winch cable to. Mounting brackets sold separately.
$4,784.99
Miller Heavy Duty Tire Lift Storage Bracket (XP850 Side Puller)
This XP850 Bus Lift Storage System is from Miller Industries. Designed specifically for storage behind the XP850 Side Puller. Frame Mount. This system can be used with both
$2,760.99
Miller 6,000 LB Tire Lift Kit (4" x 4" Crossbars)
Miller Industries 6,000 Lb. Tire Lift System To Fit a 4" x 4" Crossbar. Fits 1624, CH20, 4024 Wrecker Models.
$4,110.99
Miller King Pin Tow Plate Storage Bracket
This is a King Pin Tow Plate Storage Bracket from Miller Industries.
$251.99
Century Trailer Ball Adapter Formula 1 Wheel Lift
This trailer hitch adapter is for Century Formula 1 Wheel Lifts. It was manufactured before March of 1996. This adapter will allow you to tow a trailer with a ball type hitch behind your wheel lift. It installs quickly and is small enough to fit into your tool box with it is not in use. This hitch adapter comes with a 2" trailer ball, mounting bolts and a primed adapter. This trailer ball adapter also fits Holmes DFT-400 and Challenger I-400 wheel lifts that were manufactured before March of 1996 and Century/Champion car carriers that
were manufactured before January 2000.
$280.99
Miller Heavy Duty "Euro" Style Bus Lift 5" x 5" Crossbar
Miller Industries has begun manufacturing a Tire Lift System for the North
American market that was originally pioneered by Boniface Engineering of
England several decades ago. This attachment will only be available with units
offering the 5 x 5 crossbar. It is capable of towing vehicles from both the
front and rear axles, in either single or dual tire applications. It offers
versatility, with a wide range of adjustment for nearly all sizes of tire, as
well as axle widths.
$5,623.99
Miller Towbar Adapter Chevron Autoloaders
These are towbar adapters that fit on the crossbar of a Chevron Autogrip
wrecker by Miller Industries. These specialty attachments allow for proffessional and easy hookups when towing wrecked vehicles or trucks with steel bumpers. These adapters are sold as a pair and Chains are not included.
$1,431.99
Miller Offset Fork Holder
This is an offset fork holder from Miller Industries. These forks come on 25 ton and larger wreckers. This offset fork holder fits a 5" crossbar. Sold as pair.
$1,649.99
Miller Lift Fork Riser Set
Miller Industries Fork Risers for a 614. Fits a 3.5" x 3.5" Crossbar.
$850.99
Miller Curved Axle Fork Set
This replacement Curved Axle Fork Set from Miller Industries features a short front lead fork to easily fit under an axle. The rounded inner design fits nicely around the axle.
$931.99
Miller Offset Fork Set 6"
Miller Industries Offset Fork Adapter. This fork adapter will fit SDU units with a 6"x6" crossbar.
$1,164.99
Miller Tow Bar
This Towbar from Miller Industries comes complete with mounting hardware. This medium duty towbar will fit a Century Formula I and 6500. It is designed to pin into the tailboard on a Formula I or 6500 body in the existing tow sling brackets. It comes complete with hookup chains and rubber doughnuts on the crossbar to help eliminate damage.
$3,130.99
Miller Tow Sling for Formula I, 411 and 412 Wreckers
This Tow Slings from Miller Industries are designed for specific applications. The Century 411 & 412 brand sling has 29-1/4" slide arms. These slings are supplied with all necessary hardware and sling chains.
$4,133.99
Miller Express Modular Tow Sling
Tow Sling for Express Modular Bodies, with Storage Brackets, 3,500 lb. Capacity. Century Brand with Two Chains (5/16" x 10' Grade 43 Chain, Zinc Plated, Forged J, T, & Grab Hooks).
$4,340.99
Miller Offset Fork Holder Extensions
The extensions were designed to provide extra width out of the lift fork adapters when needed. Place the extensions into the fork adapters, install the retaining bolts, slide to the desired width and it's ready to tow. Extensions sold by the pair and will only fit the low profile cast fork holders.
$1,391.99
Miller 25,000 lb. (50 - 75 Ton) Tire Lift
Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator
Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and
Recovery units (5" x 5" Crossbar).
$6,716.99
Miller Short Tapered Axle Fork - 2" Wide Opening
These Axle Forks from Miller Industries have a 2" wide opening. This new design features a shorter and tapered front lead fork to more easily get under a front axle eliminating the need for a double pick. It also has a tighter distance between the forks to grab the axle. The extra width reduces side-to-side movement and will fit most heavy steer axles.
$180.99
–
$355.99
Miller Short Axle Fork - 3" Wide Opening
This 3" Short Fork from Miller Industries is used to pick up from the leaf spring, axle or fame of a truck. These forks are made from one piece of cast alloy steel. This process has made the yield strength increase almost two fold while making the weight almost 30% lighter. The fork has a 3" wide opening with a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the cutout.
$154.99
–
$360.99
Miller Tall Axle Fork - 3" Wide Opening
Cast Steel Alloy Forks, these forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.
$251.99
–
$582.99
Miller Spring Lift Fork Attachment Retaining Pin
Miller Industries Retaining Pin for Pivoting Spring Forks.
$45.09
Miller Heavy Duty Fork Receivers T-Handle
Aluminum T-handle, 5/8" NC thread. Used to secure Miller Heavy Duty Wrecker Fork Receivers. Fits Century and Vulcan Heavy Duty Wrecker Attachments. This part can be used to replace Part Number 12-0800590.
$21.29
Miller Medium Axle Fork - 3" Wide Opening
This fork from Miller Industreis is Cast Steel Alloy. These forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.
$207.99
–
$378.99
Miller Fork Adapter 3 1/2" x 3 1/2" Crossbar Fork Holder
These Fork Holders are designed to fit a 3 1/2" x 3 1/2" F6500 crossbar.The T-handles are sold separately part# 12-0306564. They are made from the same special cast steel alloy material as the other Miller products. This fork holder replaces part number 12-0712749.
$408.99
Miller T-Handle
This T-Handle from Miller Industries is used on the Wheel Lift Assembly of several Miller Car Carriers. Please see the features below for a list of carriers, and see the brochure tab for breakdowns.
$9.99
Miller Short Axle Fork- 4.5" Wide Opening
This Short 4-1/2" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.
$169.99
–
$445.99
Miller Medium Axle Fork - 4.5" Wide Opening
This cast steel alloy Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. Making these forks from one piece of cast steel has increased the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, 2" diameter shaft and has a 6-1/4" clearance between the fork holder and the bottom of the fork cutout.
$240.99
–
$472.99
Miller Reese Receiver Adapter (Gen 2 Car Carrier Wheel Lifts)
This Reese Receiver Wheel Lift Adapter from Miller Industries is used on GEN2 Car Carriers. This removable adapter is specifically designed to be mounted on Miller's Century, Champion, Chevron and Vulcan conventional Car Carrier Wheel Lifts, which have the built-in ball hitch receiver/towball tongue. This 2" universal receiver accepts and pintle or ball hitch with a 2" tube. It is accepted on 10 Series,12 Series LCG and 16 Series GEN2 LCG 4K standard wheel lifts. All of the mounting hardware is included on this adapter. This part can be used to replace Part Number 12-0905029.
$539.99
–
$540.99
Miller Short Offset Axle Fork - 6" Wide Opening
An Axle Fork from Miller Industries is designed with an offset to clear the housing while still offering you all of the strength and durability you need. This fork is cast out of alloy steel and is much lighter than the conventional style of welded forks. These forks can be used with Mack and other trucks and has dimensions of a 6" wide opening, 3-1/2" clearance and a 2" diameter shaft.
$240.99
–
$472.99
Miller Auto-Load Trailer Ball Adapter Kit
This Trailer Hitch Adapter from Miller industries is for the Century 300 series Express. It allows you to tow a trailer with a ball type hitch behind your wheel lift.
$382.99
–
$457.99
Filter
1 - 60 of 75 items
