In The Ditch

In The Ditch now has Galvanized Steel Trash Cans. Made from galvanized steel, these trash cans are guaranteed to last for years. You can choose from a 6 gallon trash can or a 4 gallon trash can. Each of these sizes comes with a lid included. The 4 gallon trash can and lid can be used to replace miller part number 124002700.  

In The Ditch's Locking Simple Mount is a great low cost way to hold your Speed Dollies and keep them safe. This mount is the same as the Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Choose from the Standard or the XD Mounts. The Standard is made for 4.8 Tires and the XD is made for 5.70 tires. Sold as Each.

This is a locking pin for the simple mounts for In The Ditch.

In The Ditch Trash Can Mounts are made from aluminum and can be easily mounted to any carrier or vertical surface. These mounts are made from 1/8" aluminum and they come with pre-drilled mounting holes that will fit on their Pro Series Tool Boxes for easy installation. You can choose from a mount that will hold either a 4 gallon trash can or a 6 gallon trash can. The trash can and bungee cords are not included with these mounts. Shop for a

This "W" Mount from In The Ditch is great for those wanting an easy solution for quickly mounting and storing their break over bar and axles. This mount is ideal for mounting in the back of a pickup, on top of a tool box or on a wrecker deck. Mount can be locked by using a Pad-Lock, which is not included. The break over bar is secured in place with a thumbscrew. This mount is made from steel and comes with a black finish. Get your

In The Ditch designed their XD "Extreme Duty" Trash Can Mounts to hold up to 60 lbs. of weight. Not only will these mounts hold up to 60 lbs. of weight, but they look good and will last for years. You can choose from either a 6 gallon can XD mount or 4 gallon can XD mount. These mounts are made from 1/8" thick aluminum and they have a bungee cord already installed. Both of these mounts can easily be mounted to any vertical surface such as tool boxes, truck frames, or garage walls. There is no trash can included with these mounts but we do offer those too. Shop for your new

These completely redesigned Lumber Baskets from In The Ditch are available in three different lengths: 48", 60, and 70". All of these baskets are 11" tall and 8" deep. Mounting is a snap; just bolt the basket to the back of your tool box with six 5/16" bolts using the pre-drilled holes. In minutes you will have a great place to store extra lumber, tire chains or anything else that you can think of. These Lumber Baskets are made from aluminum and they have drain holes in the bottom that will help them last for decades.

Note: Special Handling Fees Apply for Specific Items

Cut tool box installation time by more than half with this In The Ditch's Quick Mount. This Quick Mount has been the perfect choice for those who have one of the new low profile car carrier beds. In The Ditch made the mounting arms longer so you can drop the box down further to clear low profile beds. The Quick Mount has a unique low profile which will allow them to work with either inboard or outboard tilt cylinders. This Quick Mount is made from steel and come in a tuff coat black finish.

Recommend 2 mounts for 24" to 60" tool boxes and 3 mounts for 70" on up tool boxes

• The Ditch Tool Box Quick Mounts Only (Brackets sold separately)
• Works well with new Low Profile Car Carrier Beds
• Made from steel with a tuff coat black finish
• Sold as each (Not a pair)


Dimensions For Mounts:
• ITD-1581- Height: 14 9/16" Width: 7 1/8" Length: 27 3/4"
• ITD-1584- Height: 16 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1588 and ITD-1588-GLV- Height: 18 1/2" Width: 5 1/4" Length: 32 1/2"
• ITD-1580 and ITD-1850-GLV- Height: 20 1/2" Width: 5 1/2" Length: 32 1/2"
Please see photos above for extra dimensions

Following Parts Sold Separately:

In In The Ditch Quick Mount Bracket - #ITD-6268
In The Ditch Mount Spacer (Only) - #ITD-6340

These Pro Series Dolly Bunks from In The Ditch fit all sizes and all brands of dollies with either 4.80 x 8 or 5.70 x 8 tires. Dolly bunks are made from 3/16" thick aluminum and will last for years. This set includes two complete bunks and two lockable retaining chains.

This Universal Mount system is a perfect choice for those wanting a low profile all-in-one mount that holds a Speed Dolly frame, axle and break over bar. The Universal Mount uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element wrecker bodies but can be used on any brand wrecker body. The Kit comes complete with everything needed to hold 2 Dolly frames, 1 break over bar and 2 axles and comes in our Tuff Coat Black Finish. Pick from the Standard or the XD Mounts. The Standard Mount is made for 2 Speed Dollies with 4.80 Tires. The XD Mount is made for 2 XD Dollies with 5.70 Tires. Sold as set.

Ever get tired of reaching into a toolbox or under a counter to pull out a heavy object? Introducing our Heavy Duty Storage Drawers made out of military grade aluminum. These drawers are rated at 500lbs and each slide has a lock in/out position to keep from closing as your trying to place an object in the drawer. We designed this guy to mount on any flat surface with vertical adjustment for various heights. We built a drill template into the tray for ease of installation. It also includes 5 adjustable dividers which allow you to separate your items. These draw systems are offered in 19", 25", 30" and 40" setups.

This cord holder is a great way to not only securely store your power cords and air hoses but also keep them organized and easy to access. These are also perfect for a variety of hammer types and sizes to keep them at the ready above your workbench. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Air Hose Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select proper mounting hardware for pegboard, wood, metal or even drywall. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Keep all your chains and snatch blocks organized and easily accessible with the In The Ditch Snatchblock and HD Chain Holders. Available in 9", 12", and 15" lengths to meet your storage needs. Mount them up on your wall, ready to use and professionally displayed. These racks have a 250 lb load rating, just remember that it s up to you to mount them securely to a strong enough surface to handle the weight. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Snatch Block and Chain Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select the appropriate hardware for your mounting surface. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted and actually worked.

This Broom and Shovel Rack is the perfect way to store your brooms and shovels. Mount this rack to the deck, wall, or roof for easy access. The angle of the mount can be adjusted to the angle that is most convenient for you. Come pre-drilled for bungee cords to make securing your brooms and shovels easy. The rack also comes with a bolt-on bracket that keeps your broom head or shovel head flat.

This Floor Jack Tray from In The Ditch is a perfect solution for storing a Floor Jack on the deck of a wrecker or inside a Tunnel Box. This Tray has a 13" x 26" tray for the jack and a 3" x 26" Tray for the jack handle incorporated into one mount.

In The Ditch Peg Board Mounted Aerosol Can Holders come in 3 different sizes: (1) Can (3) Can and (6) Can holders. Our spray can holders are a great way to not only store your aerosol cans, they work great to keep your aerosols organized and easy to access. Our peg board spray can storage racks are made from steel and are powder coated in a black finish. The hole spacing for mounting our aerosol storage racks are made so you can install them in peg board using our Quick Mount Peg Board Screw . Installing your spray can rack is simple, just line up the mounting holes with the peg board holes and install our peg board screws. It s that simple! No drilling, no measuring, no leveling and best of all you can reuse the peg board screw over and over with no damage to the peg board hole. If you want to install the aerosol holder on any flat surface, just the type of hardware for each mounting surface. You can mount with pegboard mounting screws, dry wall screws, metal screws or mount to wood with a wood screw, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Perfect accessory for the new 4th generation X-Series Axle. Pair this T-Handle Adapter with the ITD1411 Axle Slide Tunnel Box Mount to store your axles in an easy to reach area.

With all of the various modular composite body sides that are coming out, finding the best solution for mounting your tow dollies is becoming increasingly difficult. This product by In the Ditch will solve that problem. This modular speed mount bolts directly to the steel wrecker body, suspending the dolly cradle over the composite side. This mount features 22" of tilt, allowing you to accommodate the angle of many composite body styles. This mount comes in a Tuff Coat Black finish, and is equipped with the vice action lock, eliminating the chance of theft. This mount is sold individually and is only compatible with the In the Ditch Speed Dollies or SLS Speed Dollies.

This In The Ditch 5 Gallon Gas Can Mount is made from aluminum and holds a 5 gallon plastic fuel can. The mount is made from aluminum and it is easy to install. Gas can and bungees are not included, but we also offer those. Shop for

This 3-In-1 Hook Rack from In The Ditch has become very popular because with its modular design, the uses are limitless. Each hook has an inside depth of 2-3/4", making it just the right size for hard hats, extension cords, tape rolls, wire rolls, and so much more. Each 3-In-1 rack comes with 4 arms that can be installed in any of the 5 slots so you can choose where to put it. If you need a larger hook be sure to shop for the XL Modular Hook Rack, ITD-1249.

Drivers around the world wanted a way to crib a vehicle off the ground while repositioning frame forks or while securing the front axle in an under-reach. These Aluminum Tire Stands from In The Ditch are the answer. Each stand has an individual rating of 10,000 lbs. or 20,000 lbs. as a pair. These tire stands can be counted on as they have met the stringent ASME PALD-2009 Testing Standards.

This Axle Slide Tunnel Box Mount from In The Ditch has become a best seller. This mount is easy to install and easy to use; just bolt the mount to the top of your tunnel box. Axles have a tab factory installed that fits the slot in the mount. All you do is start the axle into the mount, push across, and your axle automatically locks into place. This mount will hold two axles and one break over bar. Shop for your

This Double Axle Rack from In The Ditch is perfect for those wanting to store their dolly axles and break over bear on one side of the truck. A great feature of the double axle rack is that it can be mounted on an incline; which is a big advantage when you have a wrecker with a rear sloping deck. The double axle rack comes with different mounting brackets, whether you have a flat mounting surface or a slopped deck you will have the right mounting bracket for you truck. With the AUTO-LOX system your axles easily fit in the mount and lock into place. The mounts are pre-drilled, lockable and come in a tuff coat black finish. We also offer a

These Shelf Kits from In the Ditch are available in three different sizes: 48" 60" and 70". Full length shelves will essentially double the useable space inside of your toolbox. Made from aluminum, these shelves are 14" deep. The shelves actually come as two half shelves with a vertical support, giving you the option to use them as a half shelf or full shelf. All necessary mounting hardware is included and there is no drilled required because of they come pre drilled.

This all new GoJak Mount from In The Ditch is for those who want to mount a GoJak to a flat surface. This mount is made from aluminum and will hold the 5,000 and 6,000 series GoJaks. Shop for your

Keep your tow dollies secure on the deck of your wrecker with this Vise Action Lock from In The Ditch. The replacement lock assembly fits multiple ITD mounts and includes the cylinder, key, catch and mounting hardware.

This revolutionary Scotch Block from In The Ditch is made from lightweight, high strength alloy steel. No more having the chain atta ched to the scotch block. This was designed with a reinforced chain pocket so you can use your own chain. Scotch block measures 16" wide x 14" long and comes with a tuff coat black finish. Shop our other

Note: Special Handling Fees Apply for Specific Items

These are replacement stainless steel panels for In The Ditch Quarter Fender and Storage Fenders. They are available in 4 sizes: 16.75", 24.25", 34.75", and 42.75". Choose your size and which side you want from the drop down menus.

• Choose from 4 different sizes: 16.75", 24.25", 34.75", and 42.75"
• Choose which side you want: drivers side or passenger side
• Panels Only - Does Not Include Fender
  
  Available in the following sizes
  
  

  Item #	Side	Size
  ITD-1334-L	DRIVER	34.75
  ITD-1335-L	DRIVER	42.75
  ITD-1367-L	DRIVER	24.24
  ITD-1334-R	PASSENGER	34.75
  ITD-1335-R	PASSENGER	42.75
  ITD-1367-R	PASSENGER	24.24

This Universal Storage Bracket from In The Ditch is perfect for holding two small 2.5 gallon jugs, a 5 gallon jug, a small tool box or just about anything that will fit in its 11-1/4" x 16-1/2" mounting surface. Multiple slots have also been included so straps or bungee cords can be used to secure your items to the mount. This mount will bolt directly to a tool box.

These Storage Fenders from In The Ditch provide great looks, aerodynamics, and secure storage all in one package. They were designed for those who want to keep their trash cans, fuel cans, tire chains, and tools out of site and secure from theft. We off these Storage Fenders in four different lengths: 42.75", 34.75", 24.25", and 16.75". Each storage fender is made from 1/8" thick aluminum and is designed to hold up to year of abuse. They are pre-drilled with mounting holes that align perfectly with the pre-drilled holes in the Pro Series Toolboxes. Installation is really easy, just remove the plastic plugs in the pre-drilled holes and bolt the Storage Fender to the tool box using the included bolt kit, it's that simple! We recommend that these Storage Fenders be mounted using the ITD-1580 20.5" Quick Mount.

This Slide In Jack Bracket from In The Ditch is made from aluminum and it is 13" wide and 25" long, so most floor jacks will slide in easily. This bracket is really going to save your back. Stop wrestling with your floor jack and install this bracket today. Installation is easy; just remove the back panel of the tool box and bolt the Slide In Jack Bracket in using the included hardware kit.

Note: Special Handling Fees Apply

This hybrid Car Carrier Dolly Mount from In The Ditch has a top portion that mounts to your tuck frame. This portion is made from 1/4" thick steel and comes in a Tuff Coat Black finish. The bottom portion of this mount, which holds your speed dolly, is made from 3/16" thick aluminum that can be adjusted to fit all 4:80 x 8 tires. There is also an integrated latch system that can be locked down with a pad lock to keep your dollies safe and secure.

• Made from steel and aluminum
• Height: 22-3/16"
• Width: 17-5/8"
• Length: 37-1/2"
• Comes in a Tuff Coat Black finish
• Sold as each
• For use with 4.80 Tires

This Universal Spring Tube Mount Cable Tie-Back from In The Ditch is a great way to attach the hook on a winch line when not in use . Each universal spring tube comes with a bolt on mounting tab and one weld on mounting tab. It?s your choice to weld the tab on or bolt it on. With different mounting options this is a truly universal mount that will fit hundreds of applications. Stop using bungee cords to keep your winch lines tight and buy a set of these universal spring tubes.

This Bungee Cord Holder is the easiest way to carry and store your bungees. Put 9?, 15? and 21? bungees on the holder and carry it in one hand. When you are done just hang the mount with bungees on the included mounting plate. Don?t forget to buy your bungee cords,

This Angled Cone Mount from In The Ditch is a perfect way to mount your traffic cones on a carrier or flatbed truck. The angle of the mount allows you to quickly access cones from under a fixed deck. The angled cone mount will hold up to six 18" traffic cones. This mount is part painted steel and part aluminum that will hold up to years of abuse.

This Air Line and Wiring Bracket from In The Ditch connects to any tool box to provide a covered channel to run wires out of the tool box for lighting. An airline can also be run through the bracket to provide an easy to access airline connection.

Update the Cam Lock on your In The Ditch Speed Tow dolly with this weld-on replacement part. The cam features positive lock positioning and simple lever operation to engage/disengage the cam to rotate dolly wheels from their storage position to the ground.

In The Ditch's Locking Short Simple Mount is a great low cost way to hold your Speed Dollies. This mount is the same as the Short Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Sold as Each.

Keep your tool box organized with this Lug Wrench Bracket from In The Ditch. This pre-drilled mount easily bolts to the inside of your tunnel box and allows operators to reach lug wrenches quickly. This handy bracket holds 2 standard size lug wrenches. Shop our selection of

This is an adjustable trash can and bucket mount from In the Ditch. It will adjust to hold any trash can or bucket from 3 gallons up to 10 gallons. Made from 1/8" thick aluminum, this mount has 5/16" mounting holes and comes with a 21" bungee cord. This will easily mount to any flat surface. Sold as 2 pieces to hold 1 can.

This Slide Out Drawer system is a perfect addition to our Pro Series Tool Box by In the Ditch. This system is a great way to get your truck organized. This slide out drawer takes just a few minutes to install using the pre-drilled holes in your Pro Series Tool Box Shelf. This drawer will take all the abuse that comes from day after day use. it is made from military grade aluminum and uses composite slide pads on the drawer. This slide out drawer has a 20 lb. load rating and will work great under tables, shelving, or just about anywhere you can think of adding a slide out drawer. This draw measures 15" wide by 13" deep by 4" tall.

This Dual Trash Can Mount from In The Ditch is an efficient way to mount two 4 gallon trash cans side by side. Shop our selection of

The Tilt-N-Slide under-body slide out Dolly storage mount from In The Ditch was designed to be low, fast and easy to use. One of the things drivers like about this Dolly mount is that the Dolly can be slid out and serviced without taking it out of the mount. Another feature is that it puts the Dolly in the perfect ergonomic position for the driver to lift up. This mount also has a pre-installed Vice Action Lock installed. The Tilt-N-Slide is made from steel and comes with a black finish.

In The Ditch Pro Series 18"H x 18"W or 24"H x 24"W Underbody Toolboxes are now available with the Power Lock Remote Control Locking Option. When it comes to making your living with your truck insist on the best, insist on In The Ditch on your next truck. With the introduction of our Power Lock option for our Pro Series Toolboxes you can now easily lock or unlock your toolboxes with just a single push of the wireless remote control. No need to waste time walking around and locking each box, no more struggling to see the lock at night, no more dealing with frozen locks, just push the button it’s that simple. The Power Lock option can also be wired into your truck’s electric door locks, so you can auto lock and auto unlock your Pro Series™ boxes when you unlock truck doors. When you unlock the toolboxes, you can also wire them, so the toolbox lights come on. In the Ditch has been working diligently on ways to make the professional towing operators’ life easier. As a professional tow truck operator your time is valuable and so is your equipment. Don’t take chances with either and insist that your truck gets equipped with In The Ditch Pro Series Tool Boxes with the Power Lock option. Must purchase fob and wiring harness separately.

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 3" width and are available in 6", 12", and 18" heights and depths. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board using our optional hardware tailor made for your application.

These Storage Fenders from In The Ditch provide great looks, aerodynamics, and secure storage all in one package. They were designed for those who want to keep their trash cans, fuel cans, tire chains, and tools out of site and secure from theft. We offer these Storage fenders in four different lengths: 42.75", 34.75", 24.25", and 16.75", just choose your desired size from the drop down. Also choose which side you want, right or left. Each storage fender is made from 1/8" thick aluminum and is designed to hold up to years of abuse. They are pre-drilled with mounting holes that align perfectly with the pre-drilled holes in the Pro Series Toolboxes. Installation is really easy, just remove the plastic plugs in the pre-drilled holes and bolt the Storage Fender to the tool box using the included bolt kit, it's that simple! We recommend that these Storage Fenders be mounted using the ITD-1580 20.5" Quick Mount.

Our Aluminum Wall Hooks are a versatile and easy option to organize your truck, shop, garage, or trailer. We offer hooks in 3", 5", and 7" lengths. The heavy-duty aluminum alloy construction gives these hooks a structural rating of 100lbs. Mounting options are nearly endless including pegboard, drywall, and any other flat surfaces. Load rating may be limited by the mounting surface.

These Tire Stand Mounts from In The Ditch are a great way to store your tire stands within easy reach. These mounts have a Cam-Lock locking feature that will hold your tire stand securely in the mount. The Cam-Lock location can be on the left or right side of the mount, specify which you prefer in the drop down option. There is also a provision on the mount so you can use a Pad Lock to protect your Tire Stand from theft.

These In The Ditch Toolbox Dividers are the perfect way to organize your underbody box. They are made in several different lengths and come with pre-drilled holes so installation is a snap! Take the time to divide your box so things stay where they belong and not in one frustrating pile. Toolbox Dividers come in five different lengths so we will have one for your box. Get organized today!

We offer models to hold 4", 6", 8", and 14" length ties and a combination organizer to hold all 4 lengths. Our combination zip tie holder is a great way to not only store all your zip ties, it works great to keep your ties organized and easy to access. Made from steel and with a powder coated in a black finish, so you know it s built tough. You can install our Zip Tie Holders on any flat surface in your garage or trailer. Choose pegboard mounting screws, dry wall screws, metal screws or wood screws to mount the zip tie mount, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

In The Ditch Drill and Power Tool Holders are made from aluminum and powder coated in a black finish to provide year after year of faithful service and a clean, sharp look. Mounting these power tool holders on any flat surface in your garage or trailer is easy, just select the appropriate hardware to match your mounting surface. You can choose dry wall screws, pegboard screws, metal screws, or wood screws to mount your cordless tool holders. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

Maximize the recovery capabilities of your car carrier rollback, light duty wrecker, or medium duty tow truck with the In the Ditch SP9000 Sidepuller. This is a SP9000 Sidepuller that is designed for those who want a more customized installation. Zip's provides you with the sidepuller, from In the Ditch, with everything except the valve body and hydraulic hoses. This gives you the option of providing your own custom hydraulic controls. Typically this application is for those who order their carrier or wrecker with factory installed sidepuller controls. When you order this SP9000 sidepuller it will come with the following: Center Recovery Boom Head, Outer Removable Recovery Boom Head, Light Bar Mounting Base, 9,000 lb Winch with Tensioner Plate, Winch Free Spool with Easy Reach Handle, 3/8" x 100' Wire Rope, Adjustable SP Mounting Base, Installation Hardware, Painted Tuff Coat Gloss Black Finish, Polished Stainless Steel Rear Panel, Decal Package, Operation Manual (also available online), and it will come on a shipping stand. To view a specifications sheet and operations manual, click on the brochure tab. Click on the video tab to see more about this amazing product.

This Single Axle Rack was designed for those wanting to mount a dolly axle on each side of the truck. Each rack will hold a telescoping aluminum axle and break over bar. They are sold as a set, which contains two single axle racks and one thumb screw to hold down the break over bar. This In the Ditch's AUTO-LOX system, the axle easily fits in the mount and locks into place with just a twist. Mounts are pre-drilled, lockable and come in a tuff coat black finish. We also offer a

This is a replacement compression latch with lock for drop down dolly boxes by In The Ditch. This latch comes with a chrome finish.

This Deck Mounted 2 Gallon Container holder is designed to work with most 2 Gallon containers. This Mount is made from Aluminum, includes a 21 Bungee Cord and can be mounted to any flat surface. (Note) If You intend only transporting Fuels, please check your local laws regard transporting Flammable Liquids

This pylon is designed to fit all SP series sidepullers. It is made from steel and comes standard with stainless steel mounting hardware. It features laser cut holes for mounting work lights and is painted in a tuff coat gloss black finish. This pylon will need to have the In the Ditch light pylon mounting base installed on the sidepuller in order to mount this pylon.

This Dolly Support Arm is a handy accessory for the ITD-MODULAR-MOUNTS by In the Ditch. Now you can have the choice of mounting your dolly axle parallel with the wrecker deck if you want. This support arm comes painted Tuff Coat Black and is made in the USA.

This is a polished stainless steel dress-up kit for the SP9000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

This Integrated Speed Mount from In The Ditch is similar to the Speed Mount except it has an Integrated Mount that can hold a break over-bar and aluminum axle. Locking the axle, break over bar and Speed Dolly is all done with the built in Vice Action Lock. There is a reason this is a top seller, its ease of use keeping the dolly frame, axle and break over bar in one spot. Made from steel with a Tuff Coat Finish you will get years of dependable service. We also offer regular

These Scotch Block Mounts from In The Ditch bolt to the bottom side of a wrecker tool box for convenient storage of Scotch Blocks. These mounts come with lynch pins, and they can also be locked with your own pad lock.