Lifting Bags, Landing Bags And

ITI Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

ITI Yellow Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck. These ITI Skates willdrastically reduce the moving resistance, eliminate tire damage and make your operator more efficient and safer. Simply wedge a skate under the tires of the vehicle and begin winching. In times when you are having difficulty wedging the skates beneath the tires or wheels, the large face and durable design of the ITI skate withstands being driven into place with a mallet. These lightweight skates perform well on most surfaces including gravel, asphalt and cement. Also, utilizing skates when loading vehicles will protect the deck of your bed or trailer from damage. A better customer service will be provided because the skates will minimize the scrapes and mars on the driveway or parking lot too!

ITI Yellow Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage. 4-in-1 Axle Caps fit most 8-bolt tandem and large single axles - the most popular hub on the road.

These Axle Forks from Miller Industries have a 2" wide opening. This new design features a shorter and tapered front lead fork to more easily get under a front axle eliminating the need for a double pick. It also has a tighter distance between the forks to grab the axle. The extra width reduces side-to-side movement and will fit most heavy steer axles.

Every heavy-duty tow operator should own a pair of these U-Bolt Lifting Attachments from AW Direct. This high-carbon steel attachment is designed for faster and easier rear hook-ups on medium- and heavy-duty trucks. The beveled receiver acts as a funnel to guide the U-bolt and nut from the spring saddle onto the fork. The extra height of 5" extender allows you to stay clear of air brake and air suspension parts. The shaft is three inches tall and has a diameter of 2". The diameter of the beveled guide on the attachment is 1-7/8".

Note: Special Handling Fees Apply for Specific Items

Tow like a pro with the 74-inch long Single Piece HD Tow Ramp! You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it's safe in your hands too. The 1 inch by 5 inch notch in this Tow Ramp enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car. This ramp gives 7 inches of lift and has a 5.2-degree angle of approach. It is designed for tires up to 8 inches wide. It can support up to 2,500 pounds for a total vehicle weight capacity of 10,000 pounds.

These ramps are constructed using an exclusive, patent process. They are 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong yet durable. The ramp will not slide, scratch, or otherwise damage any floor type. The reinforced bottom allows the ramp to be used on gravel or other rough surfaces that you may encounter along the side of the road.

Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.

• Tow Truck Flatbed Extension Ramps
• Sold as a pair
• Available in a single piece or in 2 pieces
• Dimensions: 74"L x 10"W x 7"H
• Lightweight - only 13.5 lbs
• Each ramp supports 2,500 lbs. Total vehicle capacity per pair: 10,000 lbs
• Highly durable, virtually indestructible, and very stable
• Easy to use, store and transport
• Unscootable! Won't slip or slide, no matter the surface
• Safer than using boards
• Provide a professional appearance when transporting exotic cars
• Load Corvettes, Porsches and other low profile cars without doing damage

Prevent the front wheels of a towed vehicle from turning while towing from the rear with this steering wheel lock from BA Products. The strap is equipped with two coated claw hooks to latch onto the steering wheel and the brake pedal. A cam or ratchet buckle cinches the two ends tight.

Tow like a pro with the 42.3" long Compact Single Piece HD Tow Ramp! You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it's safe in your hands too. The 1 inch by 5 inch notch in this Tow Ramp enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car. This compact ramp gives 4.5 inches of lift and has a 5.2-degree angle of approach. It is designed for tires up to 8 inches wide, and it can support up to 2,500 pounds for a total vehicle weight capacity of 10,000 pounds.

ITI Starter Ramp is made for Steel Beds or Aluminum Beds and bridges the gap between the tail of a flatbed car carrier or trailer ramp and the ground surface, creating an easy transition between uneven surfaces. This starter ramp is designed with a 90 degree notch for the tail to sit in place. The low load angle the ramp provides prevents unnecessary damage to high-end vehicles or equipment with low clearance issues.

This ITI Height Extender is designed to work in tandem with the ITI Control Arm Skate (Item #

These Double Tire Skates are made by Turtle Plastics. They are 6.5" wide x 17" long. The rope handle is for handling only and it is not designed to be used as an attachment or pulling point.

This patented design from In The Ditch has a universal fit that allows you to use one hitch on different trucks. This hitch will be a real money maker for your truck. Stop sending two trucks to do the job of one. With this power hitch you can bring the customers pickup in on the deck and bring the trailer in on the wheel lift. The power hitch fits any wheel lift with 3" x 3" up to 4" x 4" crossbars, and works perfect on wreckers or carriers. The power hitch includes a 5th wheel hitch and goose neck ball. The power hitch pins on and off in minutes and has a 12,500 lb. rating.

Tow a variety of light-duty and recreational trailers with your Miller car carrier with this convenient receiver kit from Zip’s. The powder-coated bracket bolts on to the crossbar of your carrier’s wheel lift and will fit any 10 Series, 12 Series LCG or 16 Series LCG Gen II Miller car carrier models built after September of 2016.

Utilizing the Pocket Plug Container Skate from ITI makes loading or moving shipping containers slick and easy! Place this patented sea container skate beneath the corner of the container - fitting the raised plug nicely into the oblong pocket of the container. The skate's rounded ends eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

ITI Low Profile Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. This skate is perfect for use with high-end vehicles with low clearance concerns. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

This 3" Short Fork from Miller Industries is used to pick up from the leaf spring, axle or fame of a truck. These forks are made from one piece of cast alloy steel. This process has made the yield strength increase almost two fold while making the weight almost 30% lighter. The fork has a 3" wide opening with a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the cutout.

These Low Profile Fork Holders are designed to fit a 5" x 5" or 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products.

The Magna Tech Best-Lift Forklift to Wheel-Lift Towing Attachment is a handy tool to manage cars and maintain organization in any storage tow lot, impound lot, salvage yard or auto auction. Turn your forklift into a fast, efficient and damage free way tool to move cars and pick-up trucks around the lot. Simply slide the forks into the receives of the attachment and you are ready to go. This operates mechanically with no hydraulics required by wrapping spring loaded arms directly around the vehicle's tires. A forklift with a minimum of a 5,000 lb capacity is required.

The 124002634 Lift Eye Attachment is designed for front lifts on many models of the RTS, GMC, and NOVA buses and rear picks on the MCI-9. The rear eye on an MCI ,GL, and GL3 series can be utilized for a rear pick. The eyelet that is bolted on to the jack pad point on many RTS, GMC, and NOVA buses is pinned into the lift eye attachment for a front pick.

The extensions were designed to provide extra width out of the lift fork adapters when needed. Place the extensions into the fork adapters, install the retaining bolts, slide to the desired width and it's ready to tow. Extensions sold by the pair and will only fit the low profile cast fork holders.

ITI Trailer Jack Skate is used when loading or moving trailers. Place the trailer jack pedestal shoe or wheel into the pocket of the skate. The slick surface of the skate allows for more easily moving a trailer by hand - without having to lift the tongue of the trailer off the ground. It also protects parking lots, driveways and warehouse floors from damage or marring. You can utilize this skate when loading a disabled vehicle with a trailer hitch, too! As the vehicle makes the approach up the incline of a trailer or car carrier, this skate can be placed below the hitch to prevent the hitch from gouging the road surface or parking lot, causing unnecessary damage. The slick surface of the skate makes moving objects easy!

Cast Steel Alloy Forks, these forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.

Spacers for use with the Century forks from Miller Industries. This attachment was designed to be used when the front axle you are picking up is narrower than the throat of the fork you are using. Simply slide the adapter over one ear of the fork and you have created 1" narrower opening in your fork without having to carry extra attachments in your tow vehicle. Remember to always use safety chains.

This 7"H Stand extends your fork to reach higher lift points and provides extra clearance for oil pans, etc. Stand fits most stingers on the market and accepts 2"D shafted forks.

This fork from Miller Industreis is Cast Steel Alloy. These forks are made in one piece using a special process in cast steel. The yield strength has been increased almost two fold while making them almost 30% lighter than the old design forks.

These Fork Holders are designed to fit a 3 1/2" x 3 1/2" F6500 crossbar.The T-handles are sold separately part# 12-0306564. They are made from the same special cast steel alloy material as the other Miller products. This fork holder replaces part number 12-0712749.

This Short 5" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 5" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.

Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage. 10-pc. Motorcoach Set fits most major motorcoaches, buses and RVs.

Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage.14-pc. Axle Cap Set includes the most commonly used medium- and large-sized covers.

This cast steel alloy Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. Making these forks from one piece of cast steel has increased the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 5" wide opening, 2" diameter shaft and has a 6-1/4" clearance between the fork holder and the bottom of the fork cutout.

The Super Duty Axle Fork lifts any 2002+ Ford Super Duty with round front axles. The fork features a 2"D x 4"H shaft which fits any 2"-dia. receiver hole. Made from high-tensile steel for strength and durability.

This ITI Universal Container Skate makes loading and moving shipping containers easier. When the corner pockets are not accessible, this flat, low profile skate is the tool to use since you can place it anywhere along the bottom of the sea container. The container sits on the flat area of the skate and is winched into position. The skate's tapered end eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

Cast Steel Alloy Forks from Miller Industries are used when clearance is needed on a vehicle with a low front end. These forks are made in one piece using a special cast steel process. There is a 5" wide opening at the top of the fork and the shaft has a diameter or 2". There is a 9" clearance between the fork holder and the bottom of the fork cutout. The yield strength has been increased while making them almost 30% lighter than the old fork designs.

This Short 4-1/2" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.

Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy

AW Direct provides a replacement dual fork receivers.

• Hole Diameter: 2-3/16"
• Fits 5x5 or 6x4 Crossbars
• Adjusts to any width along the crossbar
• Receivers can be flipped for additional height
• Two fork holes on receivers for more finite adjustments
• Receivers held firmly in place with a T-handled bolt
• Sold in Pairs

ITI Axle Tube Height Extender works in tandem with the ITI Standard Control Arm Skate (Item #

This U-Bolt Lifting Attachment is designed for faster and easier rear hookups on many tractors. The attachment is centered on one of the rear U-bolts on each side and then the underlift is raised. The U-bolt attachment lifts on the bolt saddle while the U-bolt and nut guide it into position. These attachments are designed for Rear Lift Only. 1 Pair Included in Kit.

Don t leave the shop without this heavy-duty front tow Starter kit from AW Direct. This entry-level package includes a Quick Connect air coupler kit to supply air to brake and suspension components on the disabled truck. The included Miller short tapered axle fork set eliminates double picks by providing just enough axle clearance on the leading edge. This essential kit also includes a pair of medium-duty tie-down straps to secure the front axle to the underlift and a cam-style steering wheel lock to prevent the front wheels from shifting while under tow. See below for kit components and individual part numbers.

This cast steel alloy Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. Making these forks from one piece of cast steel has increased the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 4-1/2" wide opening, 2" diameter shaft and has a 6-1/4" clearance between the fork holder and the bottom of the fork cutout.

These Riser Brackets from Miller Industries are used when extra height is needed while towing. The riser brackets are manufactured in a welded design and incorporate a 1/2" grab hook welded to one side. With these brackets you will gain an extra 8.5" of height. Brackets will fit on a 5" x 5" heavy duty crossbar. These Riser Brackets are standard on 9055, Option for FIIIT, SDU, 5130, 5230 and 7035. Storage brackets for these riser brackets are not included.

Short Forks are used for lifting axles, springs, cross members or chassis frames. Fork features a 2"D x 4"H shaft, which fits any 2" dia. securement slot. Made from high-tensile steel.

An Axle Fork from Miller Industries is designed with an offset to clear the housing while still offering you all of the strength and durability you need. This fork is cast out of alloy steel and is much lighter than the conventional style of welded forks. These forks can be used with Mack and other trucks and has dimensions of a 6" wide opening, 3-1/2" clearance and a 2" diameter shaft.

The pivoting head on this Self-Aligning Spring Fork adjusts to fit spring assemblies on towed vehicles. Fork features a pre-drilled, four-hole pattern to give the lock pin a tight fit on any vehicle. Standard 2" shaft fits most stingers.

These Quad Tire Skates are made by Turtle Plastics. They are 13" wide x 17" long. The rope handle is for handling only and it is not designed to be used as an attachment or pulling point.

Ancra International Steering Wheel Lock Strap

ITI XL Big and Tall Automotive Skates are ideal to use when moving, loading and unloading a locked, disabled or wrecked car or truck with larger tire dimensions. This XL skate is 5 inches longer than the standard "Big & Tall" skate - perfect for the oversized pick-up truck tires. It is also great for use with equipment or tractors with larger tires.

10 bolt cover for the ZF rear found on Novabus and the new MCI DF45 motorcoach.

Miller Industries chain hook adapter kit. These chain hook tow bar adapters are specifically designed to fit the cast profile fork holders of Century and Vulcan Heavy Duty Wreckers. They are used when lifting a load when chains are required. For more versatility they may moved back and forth on the crossbar to fit the size of the load being picked up. Sold as a pair.  

This Reese Receiver Wheel Lift Adapter from Miller Industries is used on GEN2 Car Carriers. This removable adapter is specifically designed to be mounted on Miller's Century, Champion, Chevron and Vulcan conventional Car Carrier Wheel Lifts, which have the built-in ball hitch receiver/towball tongue. This 2" universal receiver accepts and pintle or ball hitch with a 2" tube. It is accepted on 10 Series,12 Series LCG and 16 Series GEN2 LCG 4K standard wheel lifts. All of the mounting hardware is included on this adapter. This part can be used to replace Part Number 12-0905029.

ITI Crossmember Container Skate makes loading and moving shipping containers easier. When the corner pockets are not accessible due to dirt, mud or debris - this handy skate is the tool to use. Simply find a crossmember on the bottom side of the sea container and place the crossmember into the 4x4 pocket and winch into position. The skate's tapered end eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

This Trailer Hitch Adapter from Miller industries is for the Century 300 series Express. It allows you to tow a trailer with a ball type hitch behind your wheel lift.

This adapter requires

This 7.25" Medium Round Axle Fork from Miller Industries is used to pick up the axle or frame of a truck. It has a 7.25" wide opening, 2" diameter shaft, and 6.5" between the fork holder and the bottom of the cutout.

To expand your lifting capabilities your Century can be equipped with the optional wheel lift grid system. This system is available to fit the 4", 5", and 6" crossbars. It is capable of towing vehicles from both the front and rear axles, in either single or dual tire applications. It offers versatility, with a wide range of adjustment for nearly all sizes of tire, as well as axle widths.

The Flush End Container Skate from ITI makes loading or moving shipping containers slick and easy! This container skate is unique in that it is designed to sit flush to every edge of the shipping container. This allows for closer front-to-back storage of the containers when in a storage yard without introducing a tripping hazard. This patented skate has a low-profile design allowing a lower overall height of the container when loaded on a trailer or a flatbed on a truck. Place the container skate beneath the corner of the container - fitting the raised plug nicely into the oblong pocket of the container. The skate's rounded ends eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

ITI Axle Tube Height Extender works in tandem with the ITI Standard Control Arm Skate (Item #

This set of two XTenders can only be used with 7-inch lift HD Tow Ramps to further lower the angle of approach. Simply place the XTenders on top of the Tow Ramps and drive on up! The XTenders can also be inverted for use as a "œhumper" ramp to get a bit of additional lift when needed. They are 10 inches wide and 35 inches long, weighing 6 pounds each.

This Miller Industries Tire Lift Storage Bracket folds down for easy access to either Part Number

Short Forks are used for lifting axles, springs, cross members or chassis frames. The fork dimensions are 2.5"W x 3.75"H, which fits any 2.5" dia. securement slot. Made from high-tensile steel.