Used Truck Marketplace

Towing Instructions

Free Shipping!

800-222-6047

Side Pullers and Recovery Tools

Sort by

Zip's Snatch Block with Chain and Grab Hook

Zip's snatch blocks with a swivel shackle and 30 inches of chain provide versatility for tow operators at a recovery scene. The combination chain, snatch block and grab hook help change the direction of the tow or gain an advantage over the disabled vehicle. See the drop-down menu for available sizes and working load limits.

$59.99 – $164.99

Zip's Snatch Block with Swivel Hook

Zip's high-quality, low-cost snatch blocks are available in four rope sizes with working load limits up to 30,000 lbs. These blocks also feature a spring-loaded latch that adds a layer of safety to the recovery scene. See the drop-down menu for available sizes and working load limits.

$36.99 – $384.99

All-Grip Snatch Blocks w/ Chain and Grab Hook

Make the time it takes to winch a wreck shorter with the All-Grip Snatch Blocks with a Chain and Grab Hook. With its 30” chain, this assembly offers an easy attachment point. Plus, it makes it easier to adjust the direction of the winch without having to adjust your truck.

$68.99 – $203.99

B/A Products Snatch Blocks w/ Chain and Grab Hook

These Snatch Blocks have a Swivel Shackle attached to a chain. The chain also has a Grab Hook attached at the end of it. Use snatch blocks to change the direction or gain a mechanical advantage over the load being moved. B/A's snatch blocks all feature bronze bushings with grease fittings.

$87.99 – $203.99

B/A Products Snatch Blocks w/ Latched Swivel Hook

Note: Special Handling Fees Apply for Specific Items

$51.99 – $599.99

SafeAll Snatch Block with Swivel Hook

Snatch blocks from SafeAll serve as essential rigging and recovery tools for a variety of industries. The pulley, sheaves and swivel hook combine to provide a critical pivot point to change the angle and direction of a pull or increase the winch capacity under a load. Strength-tested for durability, these snatch blocks can be used in off-road recoveries, towing scenarios and material handling.

$39.99 – $424.99

Zip's Side Puller Recovery Tool

When recovering a vehicle with a car carrier rollback, the Zip's Side Puller Recovery Tool allows your truck to remain parallel with the road and keeps traffic flowing, taking up less roadway with winch angles off the rear of the deck. The Zip's Side Puller Recovery Tool has a unique design that allows the operator quick and easy usage - no installation labor required! It can be locked into position utilizing the standard key slot holes along the rear approach plate on all Miller Industries 10, 12 and 16 Series STEEL car carriers. It is secured in place with a hitch pin and hairpin cotter pin.

$559.99

SafeAll Snatch Block with Chain & Grab Hook

Snatch blocks from SafeAll work great for a variety of applications. They consist of a single pulley or sheave protected by two outer teardrop-shaped side plates. A release pin with a cotter key sandwiches the plates together over the pulley. Remove both to access the inner pulley and insert the winch line.

$64.99 – $179.99

Zip's Snatch Block with Swivel Shackle

Zip's high-quality, low-cost snatch blocks are available in three rope sizes with working load limits up to 16,000 lbs. These blocks also feature a swivel shackle that increases its versatility at the recovery scene. See the drop-down menu for available sizes and working load limits.

$34.99 – $140.99

B/A Products Snatch Blocks w/ Chain and Twist Lock Grab Hook

These Snatch Blocks have a Swivel Shackle with a 30" x 5/16" Grade 70 Chain. The chain also has a Twist Lock Grab Hook attached at the end of it. Use snatch blocks to change the direction or gain a mechanical advantage over the load being moved. B/A's snatch blocks all feature bronze bushings with grease fittings.

$96.99 – $234.99

Sava High-Pressure Lifting Bags

Note: Special Handling Fees Apply for Specific Items

High Pressure Heavy Lifting Bags for lifting the heaviest loads; up to 74 US tons. Use when maximum lifting force is needed in low clearance situations. Exerts up to 116 pounds per square inch of contact surface. Solid brass and thick Kevlar-cord reinforced rubber pneumatic lifting system minimizes risk, sparks and damage caused by mechanical or hydraulic devices.

Sizes: 6" - 37"
Working Pressure: 8 BAR (116 PSI)
Max Lifting Capacity: 1.2 - 77.4 US Ton (8 BAR)
Max Lifting Height: 3.1" - 20.5"
Stackable up to 2 Bags
Thin Design
Extreme Durability
Stackable up to 2 Bags
Unique Anti-Slip Surface
Reflective Corner Markings
Clear & Distinctive Labels
Strong Manipulation Handles
Cone Shaped Protective Edges
36 month manufacturer warranty from date of purchase

Sold as Each

Product Specifications

Part Number	Type	Dimensions (LxWxH)	Weight	Working Pressure	Air Requirement	Max Lift Capacity	Max Lift Height
77973	SLK1	6" x 6" x 1"	1.2 lbs	116 psi	0.2 cu. ft.	1.2 US Tons	3.1"
77974	SLK3	9" x 9" x 1"	3 lbs	116 psi	0.5 cu. ft.	3 US Tons	5.1"
77975	SLK6	12" x 12" x 1"	4 lbs	116 psi	1.5 cu. ft.	6.1 US Tons	6.3"
76734	SLK10	15" x 15" x 1"	8 lbs	116 psi	3 cu. ft.	11.1 US Tons	8.3"
76735	SLK14	18" x 18" x 1"	11 lbs	116 psi	5.4 cu. ft.	14.9 US Tons	9.8"
76736	SLK21	22" x 22" x 1"	15 lbs	116 psi	10.5 cu. ft.	23.2 US Tons	11.8"
76737	SLK25	24" x 24" x 1"	20 lbs	116 psi	14.7 cu. ft.	27.7 US Tons	13.4"
76738	SLK33	27" x 27" x 1"	24 lbs	116 psi	21.9 cu. ft.	36.3 US Tons	15"
76739	SLK45	31" x 31" x 1"	31 lbs	116 psi	32.5 cu. ft.	49.1 US Tons	16.5"
SAVA-76794	SLK55	34" x 34" x 1"	40 lbs	116 psi	46.1 cu. ft.	60.5 US Tons	18.5"
SAVA-573241	SLK70	37" x 37" x 1"	50 lbs	116 psi	53.2 cu. ft.	77.4 US Tons	20.5"

$301.99 – $3,028.99

McKissick Evolution Series Snatch Blocks Miller Exclusive

The 420 Champion Series snatch blocks from McKissick are perfect for heavy duty rigging operations because they greatly improve your winches function and pulling power. The hooks and side plates are made from forged alloy steel that is also heat treated. This makes the blocks exceptionally durable while keeping them as light as possible. Each of these sizes will fit a 3/4" - 7/8" wireline. The opening feature permits the insertion of a rope line while the block is suspended from a gin-pole. The side plates on these snatch blocks have been designed to eliminate the possibility of a rope jamming.

$1,363.99 – $2,262.99

AW Direct Ice Claw

This Ice Claw keeps you safe in icy conditions. Designed to fit 3-1/2" x 3-1/2" or 3" x 3" crossbars which are commonly found on car carriers and light-duty tow trucks.

$132.99

All-Grip Snatch Block w/ Swivel Hook

Leaving tools behind is a pain. That’s why the All-Grip Snatch Block w/ Swivel Hook is painted hi-vis green so you can’t miss it. The snatch block also comes with a hook latch so it’s ready to be used right out of the box. Finally, this snatch block combines a forged hook and yokes, increasing its strength and durability.

$76.99 – $446.99

In The Ditch Wire Rope Tie Back Spring Tube

The ITD Wire Rope Tie-Back Spring Tube is perfect for securing the winch-line from your central boom, and prevents the line from dangling or bouncing around. Can be used on both the SP9000 and the SP12000.

$76.99

Yoke Snatch Blocks w/ Swivel Hook

These Snatch Blocks from Yoke come with a Swivel Hook and Heavy Duty Latch. Yoke snatch blocks are manufactured from the highest quality tensile steel. Bronze bushings and grease fittings allow for ease of use and extended sheave life. All blocks are 100% Magnaflux tested and are supplied with a model number, wire rope size, working load limit and usage warnings.

$167.99 – $586.99

In The Ditch Alloy Scotch Block

This revolutionary Scotch Block from In The Ditch is made from lightweight, high strength alloy steel. No more having the chain atta ched to the scotch block. This was designed with a reinforced chain pocket so you can use your own chain. Scotch block measures 16" wide x 14" long and comes with a tuff coat black finish. Shop our other

$284.99

SafeAll Snatch Block with Swivel Shackle

Snatch blocks from SafeAll are a great tool in towing and recovery scenarios, off-road recreational use and material handling operations. These snatch blocks have been strength-tested for durability. Each one is dual labeled with its capacity rating and rope size.

$39.99 – $154.99

Crosby S-4320 Latch Kit

This is a latch replacement set for different hooks.

$13.99 – $84.99

Zip's Miller Car Carriers Custom Anchor Spade

Zip's Built Anchor Spade is a custom-fit accessory designed for Miller Industries 10 Series and 12 Series LCG Car Carriers. This spade fits over the rear bed stabilizer pad of the car carrier. This attachment fits both the Right and Left Stabilizer Leg.

$329.99 – $377.99

B/A Products Spreader Bar Lifting Strap Kit

This is the fast and safest way to lift a vehicle. This kit was created to help you professionally lift a vehicle up to 13,320 lbs. carefully and securely from an accident scene. There are multiple ways to attach to the casualty using terminal connections. The straps have 36" of 1/4" grade 80 chain on one end to pass through the small holes of import vehicles wheels and connect back to the twist lock grab hook.

$856.99

Diversified Products Medium Duty Steel Scotch Blocks

These heavy-duty Steel Scotch Chocks anchor to light- and medium-duty trucks for extra holding power. Constructed with 1/4"-thick steel, chocks feature a serrated edge for increased gripping power. A 3-1/2'L chain anchors to your truck to prevent overrunning chock. Sold in pairs.

$290.99

Dica Safety Tech Heavy Duty Outrigger Pads

Dica Safety Tech Outrigger Pads are engineered from top to bottom and built using propietary engineered thermoplastic formula for improved performance that meets your everday needs.

$176.99 – $1,213.99

Zips Snatch Block Replacement Latch Kits

Zips Snatch Block replacement latch kits. The kits are available in seven sizes. See the drop-down menu for available sizes.

$4.39 – $7.99

Zip's Custom Aluminum Snatch Block Bracket

Zip's Snatch Block Storage Bracket. Designed specifically for the snatch blocks to be stored by the hook. The bracket can typically store up to 4 blocks at a time. 17.5" Long. Heavy Duty Aluminum Construction. Bolt-on installation.

$84.60

SafeAll Roll King

SafeAll's Roll King is an adjustable rollover stick to use when overturning vehicles which have come to rest on their roofs. A professional grade tool for the professional Towing & Recovery Operator!

$399.99 – $514.99

Scotch Block and Spade Blade 15 1/2"

Improve grip on icy or slippery surfaces on a scotch block, wheel lift or stabilizer spade with this replacment blade from Zip's AW Direct.

$64.00

Zip's Custom Aluminum Snatch Block and Chain Bracket

This is a Zip's Custom aluminum snatch block and chain bracket. This bracket allows you to customize your toolbox to make you more efficient. This is a simple bolt-on bracket that has a variety of uses. It can hold your snatch blocks, your chains, or both. This bracket is 16" long.

$90.00

Dica Safety Tech Medium Duty Outrigger Pads

Dica Safety Tech Outrigger Pads are engineered from top to bottom and built using propietary engineered thermoplastic formula for improved performance that meets your everday needs.

$138.99 – $555.99

McKissick Snatch Block Model 418 Light Champion

The McKissick Snatch Block Model 418 Light Champion is very sturdy. The hook, yoke and swivel tee are all made of forged steel. Despite that, it is significantly lighter than other snatch blocks that are made of non-alloy material.

$265.99 – $1,031.99

Skookum Snatch Blocks w/ Swivel Hook

Wreckers have evolved, now so has the Snatch Block! These are lightweight blocks weighing between 19 and 44 lbs depending on your size. These blocks are for use with winch cable or synthetic rope. All of these blocks come with a latched forged swivel hook. These innovative lightweight hooks combine a custom high strength alloy with a low profile design, creating a tremendous weight to strength ratio. They have a 4:1 design factor. The composite sheaves are made with a material blend that is specifically designed for increased strength and durability. These Skookum Snatch Blocks are made in the USA.

$2,152.99

NRC Adjustable Spreader Bar

This short spreader bar is easy enough for one guy to handle and set up. It comes with 3 sections that are rated for 60,000 lbs. at 7'6" at 60 degrees. At full extension, 12'4", they are rated for 35,200 lbs. at 60 degrees. Size of holes are 1 1/2"

$1,899.99

B/A Products Snatch Blocks w/ Swivel Shackle

Specifications:

Available in the following sizes

Item #	Sheave Size	WLL	Chain Grade	Wire Rope Size
6I-2T3SW	3"	2 Ton	Grade 70	5/16" - 3/8"
6I-4T4SW	4.5"	4 Ton	Grade 100	3/8" - 1/2"

$74.99 – $122.99

Yoke Alloy 12 Ton Snatch Blocks w/ Swivel Hook

These Yoke Snatch Block are made from all alloy, making it 40% lighter than standard snatch blocks. Block fits rope sizes 3/4" - 7/8". They are bronze bushed with grease fittings, have a latched swivel hook and closed die forged steel sheaves. The forged components are 100% Magnaflux Inspected. Each block is fatigue rated and date coded, and they meet all requirements of ASME B30.26.

$904.99 – $1,103.99

In The Ditch SP9000 Sidepuller

Maximize the recovery capabilities of your car carrier rollback, light duty wrecker, or medium duty tow truck with the In the Ditch SP9000 Sidepuller. This is a SP9000 Sidepuller that is designed for those who want a more customized installation. Zip's provides you with the sidepuller, from In the Ditch, with everything except the valve body and hydraulic hoses. This gives you the option of providing your own custom hydraulic controls. Typically this application is for those who order their carrier or wrecker with factory installed sidepuller controls. When you order this SP9000 sidepuller it will come with the following: Center Recovery Boom Head, Outer Removable Recovery Boom Head, Light Bar Mounting Base, 9,000 lb Winch with Tensioner Plate, Winch Free Spool with Easy Reach Handle, 3/8" x 100' Wire Rope, Adjustable SP Mounting Base, Installation Hardware, Painted Tuff Coat Gloss Black Finish, Polished Stainless Steel Rear Panel, Decal Package, Operation Manual (also available online), and it will come on a shipping stand. To view a specifications sheet and operations manual, click on the brochure tab. Click on the video tab to see more about this amazing product.

$11,594.99 – $14,212.99

In The Ditch Pylon SP Series Sidepullers

This pylon is designed to fit all SP series sidepullers. It is made from steel and comes standard with stainless steel mounting hardware. It features laser cut holes for mounting work lights and is painted in a tuff coat gloss black finish. This pylon will need to have the In the Ditch light pylon mounting base installed on the sidepuller in order to mount this pylon.

$512.99 – $547.99

Miller Wheel Lift Anchor Spade (FI DFT-400 I-400)

This Miller Industries Wheel Lift Anchor Spade fits Century Formula I, Holmes DFT-400, and Challenger I-400. The wheel lift spade is designed to fit over the outer tube of the wheel lift and use the downward force of the wheel lift to anchor the truck while winching.

$379.99

In The Ditch Alloy Scotch Block Mounts

These Scotch Block Mounts from In The Ditch bolt to the bottom side of a wrecker tool box for convenient storage of Scotch Blocks. These mounts come with lynch pins, and they can also be locked with your own pad lock.

$63.99

In The Ditch SP9000 Sidepuller Dress Up Kit

This is a polished stainless steel dress-up kit for the SP9000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

$99.99

Dica Safety Tech Super Duty Outrigger Pads

Dica Safety Tech Outrigger Pads are engineered from top to bottom and built using propietary engineered thermoplastic formula for improved performance that meets your everday needs.

$294.99 – $441.99

CM Latch Kit for New Profile Eye Hook, 2 Ton

Please Note: Product Discontinued - ALL SALES FINAL!

$11.99 – $32.99

Miller Spreader Bar Kit Long

Miller Industries Spreader Bar Kit. Miller Industries has developed a new spreader bar to work in conjunction with their full integrated and rotator product lines. Designed for use in all types of heavy and light duty lifting applications, this unique spreader bar allows for executing straight vertical lifts without damaging or collapsing the sides of the casualty.

$4,154.99

All-Grip Snatch Block w/ Swivel Shackle

With its sturdy shackle, the McKissick Snatch Block Model 419P offers a reliable connection. Not to mention this snatch block meets or exceeds all requirements of ASME B30.26. As a result, you know this snatch block will hold up.

$51.99 – $89.99

SavaTech Compressor Air Hose Adapter

This coupling adapter from Savatech allows you to attach a lifting bag airline to a standard air compressor coupler.

$139.99

CM Latch Kit for Swivel/Old Profile Eye Hook, 2 Ton

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Use these spring-loaded latches with swivel hooks and older-profile eye hooks that have a single hole near the eye. Ideal for keeping chain bridle on the cable.

Versatile: Use with swivel hooks and older-profile eye hooks that have a single hole near the eye

$10.07

Miller Spreader Bar Mounting Brackets

These Spreader Bar Storage Brackets From Miller Industries are a great way to store you spreader bar on the top of your body side on a heavy duty wrecker. Sold as Pair.

$154.99

Miller Dual Snatch Block Storage Kit 2017+

Miller Industries dual snatch block storage kit fits 2017 and newer, and is a great way to store your snatch blocks. This snatch block mount holds 2 Snatch Blocks. Aluminum Construction with simple bolt-on installation. Snatch Blocks and Dri-Dek not included.

$312.99

McKissick Snatch Block Model 416 w/ Latched Swivel Hook

The McKissick Snatch Block Model 416 w/ Latched Swivel Hook is very sturdy. The hook, yoke and swivel tee are all made of forged steel, and together, they remain significantly lighter than other snatch blocks that are made of non-alloy material.

$1,068.99 – $1,909.99

Miller Century Heavy Duty Wrecker Diagonal Jack Legs Grader Replacement Blade

This Miller replacement grader blade is used on the rear outriggers of all Century Heavy Duty Integrated Wreckers. This is the blade used on Century Wrecker Models: 4024, 5130, 5230, 7035, and 9055.

$52.56

Buyers Rubber Outrigger Pad 18" x 18"

Constructed of 2" solid rubber these outrigger pads have a textured surface to help with slippage and a built-in handle for ease of carrying. Ideal for protecting concrete and paved surfaces. Can also be used offroad to help keep outriggers from sinking into the ground.

$119.99

In The Ditch Stainless Steel Rear Accent Panel SP8500/SP9000 without Integrated Controls

This is a replacement rear accent panel for the SP8500/SP9000 Sidepuller. The panel is made out of polished stainless steel, with a mirrored finish.

$358.99

Sava Inflation Hoses

Sava inflation hoses can be used with the Sava lift bags. These hoses are available in 2 sizes and 4 different colors. This offers versatility for all jobs and the ability to identify the proper hose during operation.

$139.99 – $279.99

B/A Products High-Pressure Matjack Air Bags

These MatJack high pressure air bags are steel reinforced. These air bags come with 3 different lift capacities. These lift bag are sold as each, they are available in a 13 ton lift capacity, a 22 ton lift capacity, or a 32 lift capacity. All 3 of these air bags have a 120 P.S.I. working pressure. These bags are great on a recovery scene where you don't have enough clearance to use a standard jack.

$1,121.99 – $1,700.99

Scotch Block and Spade Blade 16"

Replacement Blade, wheel lift spade and stiff leg. 16" long with 4 mounting holes.

$41.00

Green Pin Snatch Block with Hook

The Green Pin Snatch Block HK is a light-weight snatch block type 601HK with a hook attached. The snatch block has a smooth, uninterrupted pull due to the conical roller bearings. The coating of the Green Pin Snatch Block HK ensures long-term durability, even under harsh conditions. It is available in a range with a working load limit from 2 up to 15 ton.

$231.99 – $2,839.99

Buyers Poly Outrigger Pad 24" x 24"

Constructed of 1" thick durable, high density polyethylene, these outrigger pads have a textured surface to help with slippage and rope style handle for ease of carrying. This lightweight pad is half the weight of rubber. It is ideal for protecting concrete and paved surfaces. Can also be used offroad to help keep outriggers from sinking into the ground.

$141.99

Zip's Rollover Recovery Stick

Zip's 48" wooden recovery stick features an angled end for optimal positioning.

$17.99

Miller Approach Plate Roller Guide

This new approach plate roller guide attachment is for 10, 12, and 16 Series Steel car carriers. This new attachment enables 180 degrees of light-duty recovery capability at the back of the carrier. The roller guide attaches to the approach plate and fits steel car carrier beds only that are 2018 and newer. This roller guide attachment is designed to be used with 3/8" and 7/16" wire rope and it is rated for 3,500 lbs. of line pull. The roller guide attachment is engineered to the highest standards of durability, and is constructed of fabricated steel with zinc plating for corrosion resistance.

$924.99

B/A Products Compact Lifting Beam

Lightweight and non-sparking; the Compact Lifting Beam can upright tankers, tank trailers, or buses! Just insert through man-ways, attach rigging, and lift!

$3,139.99

Miller Century Wreckers Outrigger Blade 19 1/2"

This Outrigger Blade from Miller Industries is a Wheel Lift Attachments. It is used on the assembly of Century, Challenger and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

$51.67

1 - 60 of 182 items