Equipment and Trailer Parts

Sort by

Century and Vulcan Carriers - Seal Kit Bed Tilt Cylinder

This Seal Kit from Miller Industries is used on the Bed Tilt Cylinder

$227.99

Actuator 12V Keyless Latch

Please Note: Product Discontinued - ALL SALES FINAL!

$54.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 806 / 807 Auto Grip

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$106.99

Miller Base End Wheel Lift Tilt Cylinder Pin Vulcan 806 / 807 Auto Grip

This is the Wheel Lift Tilt Cylinder Upper Pin for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$192.99

Vulcan 880 / 890 Crossbar 3.5" x 3.5"

This is a complete crossbar assembly less the wheel retainers by Miller Industries for the Vulcan 880/890 Series.

$3,249.99

Retainer / Snap Ring 1" External Vulcan 880 / 890 Wreckers

This is a 1" Heavy Duty extended retaining / snap ring that is used on the boom and underlift of wreckers.

$2.39

Vulcan 807 Aluminum Bronze Wheel Lift Bushing

This is an aluminum bronze bushing for a wheel lift pivot pin on a Vulcan 807 by Miller Industries.

$90.99

Vulcan Wear Pad Bottom V60 and V70

Bottom wear pads for the underlift on a Vulcan V60 or V70 wrecker.

$20.79

Vulcan 890 Right Wheel Grid

Note: Special Handling Fees Apply

Wheel Grid assembly, right hand, fits Vulcan 850 & 890 wheel lifts. Uses 8501000 l-arm. This part can be used to replace Part Number, 8500500.

Fits on 4" x 4" square tube
Vulcan patented strapless system
6,000lbs lift rating

$557.99

Vulcan 800 Series and Carriers - Grid Right 3.5"

Note: Special Handling Fees Apply

This Wheel Grid Assembly from Miller Industries is a right hand assembly that fits 3.5" x 3.5" square tubes. The wheel grid has a Vu lcan patented strapless system that is used on the Crossbar and Outer Crosstube Assembly of Vulcan 804, 806, 870, and 880 wheel lift s, as well as Vulcan Car Carriers. This wheel grid accepts L-Arm 8700180. Click here for the left hand version of this wheel grid 8800800.

Vulcan patented strapless system
Lift rating of 4,000 lbs.
Accepts L-Arm 8700180
Get the right hand version of this wheel gird, 8800800

Fits:
2010-Current Vulcan Modular 804 Wreckers
2010-Current Vulcan Modular 806 Wreckers
Vulcan 804, 860, 870, and 880 wheel lifts
Vulcan car carriers

$857.99

Vulcan Wear Pad Outer Stinger 880 / 890 / 805 / 896 / 897

This is a wheel lift wear pad bar for the outer stinger on light duty Vulcan wreckers by Miller Industries. There are 2 wear pads per wheel lift and they are located on the upper, outside portion of the stinger. The Vulcan models this wear pad will fit are: Vulcan Modular 880/890, 880/890, 805, 896/897. See Brochures for reference charts.

$12.84

Miller Boom Lift Cylinder 3.5" Bore x 10.44" Stroke Holmes Vulcan

This is the Wrecker Boom Lift Cylinder on the Holmes 440SL, Vulcan 810 Intruder, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 3.5" bore with a 10.44" stroke. This lift cylinder connects to the subframe weldment and to the outer wrecker boom weldment. This is the cylinder that raises the boom of the wrecker up and down. This lift cylinder is also referred to as the boom elevation cylinder. To see which specific models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

$1,318.99

Miller Snap Ring 1" External Vulcan Modular 880 / 890

This is a 1" Snap Ring by Miller Industries. This snap ring is used on the wheel lift extend cylinder pin. This snap ring secures the pin in place. To view the part schematic click on the Brochure tab.

$2.39

Miller Base End Boom Lift Cylinder Pin Holmes Vulcan

This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.

$71.99

Miller Base End Wheel Lift Tilt Cylinder Pin Vulcan 810 Power Tilt

This is the Wheel Lift Tilt Cylinder Pin for the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.

$216.99

Vulcan Crossbar 3.5"

Note: Special Handling Fees Apply

This is a 3.5" square crossbar by Miller Industries designed for Vulcan 804, 806, 860, 870, and 880 series wheel lifts and Vulcan car carrier wheel lifts. It uses VUL-880K1 pivot pin kit. See Features for related parts and brochures for reference chart. This part can be used to replace Part Number 8700150.

3 1/2" x 3 1/2" square tube
Accepts 8800800 & 8800900 outer crosstubes
Uses VUL-DK1 detent ball kit
Vulcan 804, 806, and 880/890 Series

Related Parts:
Pivot Pin Kit VUL-880K2
Crosstubes (CROSSTUBES3.5)

$935.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 810 Intruder

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 810 Intruder light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the wheel lift tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$85.99

Vulcan 850 and 890 Crossbar 4" x 4"

Note: Special Handling Fees Apply

Crossbar, Vulcan 850 and 890 series wheel lifts, uses the VUL-890K1 pivot pin kit. This part can be used to replace Part Number 850020300.

4 X 4 square tube
Accepts 8900400 & 8900500 outer crosstubes
Uses VUL-DK1 detent ball kit
Length: 64"
Width: 4"
Height: 8.5"

$1,050.99

Vulcan Wheel Lift Pivot Pin 3" Pin '05 and Older

This is a crossbar pivot pin for a 3.5" Vulcan Crossbar

$61.99

Miller Rear Wheel Lift Extend Cylinder Pin Vulcan 800 Series

This is the Wheel Lift Extend Cylinder Rear Pin for the Vulcan 800 Series light duty wreckers by Miller Industries. This includes the 880 / 890 Series, Modular 880 / 890 Series and the 896 / 897 Series. This pin is used to connect the wheel lift extend cylinder to the wheel lift inner boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

$69.99

Miller Lower Tilt and Lift Cylinder Pin Vulcan 800 Series

This is the Wheel Lift Tilt Cylinder Lower Pin on the Vulcan 880 / 890 Series and the Vulcan 896 / 897 Series light duty wreckers by Miller Industries. This pin is also used to attach the wrecker boom lift cylinder to the subframe weldment on the Vulcan 896 / 897 Series wrecker. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$123.99

Century Up / Down Spacer Bar Vulcan 800 Series

This is the spacer bar by Miller Industries that is located on the up/down portion of the outer stinger weldment on a Vulcan Light Duty Wreckers. This spacer bar will fit on the following models: Vulcan Modular 880/890, 880/890, 896/897. There are two of these spacer bars for each wheel lift. See features for related hardware and see brochures for reference charts. Sold as Each.

$52.99

Miller Rod End Boom Lift Cylinder Pin Vulcan 805 / 806 / 807 / 810

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$93.99

Miller Front Wheel Lift Extend Cylinder Pin Vulcan 880 / 890 Series

This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This pin is used to connect the wheel lift extend cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

$32.39

Miller Lower Wheel Lift Cylinder Pin Vulcan 880 / 890 Series

This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This is the lower pin and it goes through the rod end of the cylinder. This cylinder connects the lift cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$82.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 812 and 810

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 812 Intruder and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$91.99

Miller Boom Extend Cylinder Pin Vulcan 880 / 890 / 806

This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 880 / 890 Series and the Vulcan 806 Series light duty wreckers by Miller Industries. This pin is used to secure the boom extend cylinder to the inner wrecker boom weldment. To view the part schematic click on the Brochure tab.

$43.19

Miller Steel Wheel Lift L-Arm Drivers Wheel Lift-Vulcan 896 and 897 MD Wreckers

This zinc-plated mild steel L-Arm from Miller Industries fits the driver side of the wheel lift on Vulcan 896 and 897 medium-duty wreckers. Otherwise known as a tire restraint or wheel retainer, the 2" x 3" rectangular tube fits the 12-4008001 outer crosstubes and offers adjustment holes and a grated tire scoop pan for tire securement.

$485.99

Miller Upper Wheel Lift Cylinder Pin Vulcan 880 / 890 Series

This is the Upper Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This is the upper pin and it goes through the base end of the cylinder. This cylinder connects the lift cylinder to the wheel lift tilt column weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

$43.19

Miller Wheel Lift Tilt Cylinder Vulcan 806 / 807 Auto Grip

This is the Wheel Lift Tilt Cylinder for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This is the cylinder that tilts the wheel lift of your wrecker up and down. This cylinder is attached to the wrecker outer boom weldment and the wheel lift outer boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$2,084.99

Miller Wheel Lift Tilt Cylinder Vulcan 880 / 890 Series

This is the Wheel Lift Tilt Cylinder for the Vulcan 880 / 890 Series light duty wreckers by Miller Industries. This cylinder allows your wheel lift to tilt up and down. This cylinder connects to the wheel lift tilt column and the subframe of the wrecker. To view the part schematic click on the Brochure tab.

$2,179.99

Miller Base End Wheel Lift Lift Cylinder Pin Vulcan 896 / 897

This is the Upper Lift Cylinder Pin on the Wheel Lift of the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the wheel lift tilt column. To view the part schematic click on the Brochure tab.

$81.99

Vulcan 896 / 897 Crossbar 4.5" x 4.5"

Crossbar, Vulcan 896 & 897 wheel lift

$1,050.99

Vulcan Up / Down Wear Pad Holder 880 / 890 and 896 / 897

This is a wear pad holder on the up/down portion of the wheel lift by Miller Industries. It is bolted on by tow bolts and there are 2 wear pad holders per wheel lift. This wear pad holder fits the following wreckers: Vulcan 880/890, Modular 880/890 and 896/897. See Features for related hardware and Brochures for reference charts.

$30.39

Miller Boom Lift Cylinder 8 Ton Vulcan 880 / 890

This is the Wrecker Boom Lift Cylinder for the Vulcan 880 / 890 Series light duty wreckers by Miller Industries. This cylinder attaches to the outer wrecker boom weldment and the subframe of the wrecker. This cylinder raises the boom of your wrecker up and down. This cylinder can also be referred to as the boom elevation cylinder. To view the part schematic click on the Brochure tab.

$2,837.99

Miller Extend Front Cylinder Pin Heavy Duty Vulcan

This is a replacement front mounting pin weldment for the extend cylinder on heavy duty Vulcan wreckers. This pin fits the V-60, V-70, V-90, and V-100 heavy duty wreckers by Miller Industries. This pin attaches the wheel lift stinger extend cylinder to the wheel lift folding boom weldment. To view part schematics please click on the Brochure tab.

$299.99

Miller Steel Wheel Lift L-Arm Driver Wheel Lift - Vulcan 896 and 897 MD Wreckers

This adjustable L-Arm from Miller Industries fits the driver side of the wheel lift on Vulcan 896 and 897 medium-duty wreckers. Otherwise known as a tire restraint or wheel retainer, this zinc-plated mild steel 2" x 3" rectangular tube fits the 12-4008001 outer crosstube. The L-Arm is angled in and downward to create additional clearance on smaller vehicles. The scoop style tire pan is also grated for improved grip.

$597.99

Miller Boom Lift Cylinder Vulcan V-50

This is a replacement boom lift cylinder for the Vulcan V-50 heavy duty wrecker by Miller Industries. This cylinder attaches to the subframe and outer boom weldment of your wrecker. This cylinder is designed to fit both the right and left side of the wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

$5,195.99

Miller Boom Lift Cylinder Vulcan 805 / 806 / 807 Auto Grip

This is the Wrecker Boom Lift Cylinder for the Vulcan 805, Vulcan 806, and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This is the cylinder that raises the wrecker boom up and down. This cylinder attaches to the wrecker subframe weldment and to the wrecker outer boom weldment. This cylinder is also referred to as the boom elevation cylinder. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$2,217.99

Miller Base End Wheel Lift Tilt Cylinder Pin Vulcan 805

This is the Wheel Lift Tilt Cylinder Upper Pin on the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.

$82.99

Miller Front Boom Extend Cylinder Pin Vulcan 880 / 890

This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 880 / 890 Series light duty wrecker by Miller Industries. This pin has a 1-1/4" diameter and a length of 6-5/8". This pin is used to secure the boom extend cylinder to the outer wrecker boom weldment. To view the part schematic click on the Brochure tab.

$114.99

Century and Vulcan Carriers - Seal Kit Bed Tilt Cylinder

This Seal Kit from Miller Industries is used on the Bed Tilt Cylinder

$130.99

Miller Steel L-Arm Bracket Replacement - Vulcan 896, 897 and V30 Light and MD Wreckers

This painted steel L-Arm bracket from Miller Industries is a replacement weldment for the wheel lift on Vulcan 896, 897 and V30 light- and medium-duty wreckers. This receiver mounts to the passenger side wheel grid and secure the L-Arm, otherwise known as a scoop, wheel retainer or tire restraint.

$702.99

Miller Wheel Lift Extend Cylinder Vulcan 880 / 890 Series

This is the Wheel Lift Extend Cylinder on the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This cylinder connects the inner and outer wheel lift boom weldments together. This cylinder is what extends the wheel lift stinger out and in. To see which specific models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

$1,037.99

Miller Boom Extend Cylinder Vulcan V-60 V-70 V-90 and V-100 HD Wreckers

This is a replacement boom extension cylinder for the Vulcan V-60, V-70, V-90, and V-100 heavy duty wreckers by Miller Industries. This cylinder connects to the inner and outer boom weldments and extends the inner boom weldment away from the wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

$6,069.99

Miller Rod End Wheel Lift Tilt Cylinder Pin Vulcan 805

This is the Wheel Lift Tilt Cylinder Lower Pin on the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$40.59

Miller Wheel Lift Cylinder Vulcan 896 / 897 Series

This is the Lift Cylinder on the Wheel Lift of the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This is the cylinder that raises and lowers the wheel lift of your wrecker. This cylinder attaches to the wheel lift outer boom weldment and the wheel lift tilt column. To view the part schematic click on the Brochure tab.

$2,198.99

Miller Rod End Boom Extend Cylinder Pin Vulcan 896 / 897

This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This cylinder pin goes through the rod end of the cylinder. This pin connects the boom extend cylinder to the wrecker inner boom weldment. To view the part schematic click on the Brochure tab.

$65.99

Miller Base End Boom Extend Cylinder Pin Vulcan 896 / 897

This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This cylinder pin goes through the base end of the cylinder. This pin connects the boom extend cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.

$73.99

Miller Wheel Lift Extend Cylinder Vulcan 805

This is the Wheel Lift Extend Cylinder for the Vulcan 805 light duty wrecker by Miller Industries. This cylinder attaches to the wheel lift outer and inner booms. This is the cylinder that extends the wheel lift in and out on your wrecker. To view the part schematic click on the Brochure tab.

$2,321.99

Miller Base End Wheel Lift Extend Cylinder Pin Vulcan 896 / 897

This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This pin goes through the base end of the extend cylinder. This pin connects the wheel lift extend cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$82.99

Miller Rod End Wheel Lift Extend Cylinder Pin Vulcan 805

This is the Wheel Lift Extend Cylinder Pin for the Wheel Lift of the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the rod end of the cylinder. This pin is used to attach the wheel lift extend cylinder to the wheel lift inner boom weldment. To view the part schematic click on the Brochure tab.

$81.99

Miller Boom Extend Cylinder Rear Pin Vulcan V-100 HD Wreckers

This is a replacement boom extension cylinder rear pin for the Vulcan V-100 heavy duty wrecker by Miller Industries. This pin connects the boom extend cylinder to the inner boom weldment of your wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

$90.99

Miller Rod End Boom Lift Cylinder Pin Holmes Vulcan

This is the Wrecker Boom Lift Cylinder Pin on the Holmes 440SL, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the boom lift cylinder to the main boom of the wrecker. To see which specific models this pin will fit see Features below. To view part schematics click on the Brochure tab.

$97.99

Miller Rod End Wheel Lift Cylinder Pin Vulcan 896 / 897

This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$100.99

Miller Base End Wheel Lift Extend Cylinder Pin Vulcan 805

This is the Wheel Lift Extend Cylinder Pin for the Wheel Lift of the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the base end of the cylinder. This pin is used to attach the wheel lift extend cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

$118.99

Miller Wheel Lift Extend Cylinder Vulcan 896 / 897

This is the Wheel Lift Extend Cylinder for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This is the Cylinder that extends the boom of your wheel lift out and in. This cylinder attaches to the wheel lift outer and inner boom weldments. To view the part schematics click on the Brochure tab.

$2,901.99

Miller Wheel Lift Tilt Cylinder Vulcan 805

This is the Wheel Lift Tilt Cylinder for the Vulcan 805 Series light duty wrecker by Miller Industries. This is the cylinder that tilts the wheel lift of the wrecker up and down. This cylinder attaches to the wheel lift outer boom weldment and the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.

$2,912.99

Miller Wheel Lift Tilt Cylinder Vulcan 896 / 897

This is the Wheel Lift Tilt Cylinder on the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This is the cylinder that tilts the wheel lift up and down on your wrecker. This cylinder attaches to the wrecker subframe and to the wheel lift tilt column. To view the part schematic click on the Brochure tab.

$6,434.99

Vulcan 880/890 Boom Pivot Pin

This is the boom pivot pin wedment for a Vulcan 880/890 Wrecker by Miller Industries.

$230.99

1 - 60 of 67 items