Winches and Cables

Sort by

Miller Warn Winch 8" Tensioner

OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant pressure against your winch drum, which makes your wire rope wind smoother.

$266.99

Miller 5" x 5" Crossbar Riser Bracket Set

These Riser Brackets from Miller Industries are used when extra height is needed while towing. The riser brackets are manufactured in a welded design and incorporate a 1/2" grab hook welded to one side. With these brackets you will gain an extra 8.5" of height. Brackets will fit on a 5" x 5" heavy duty crossbar. These Riser Brackets are standard on 9055, Option for FIIIT, SDU, 5130, 5230 and 7035. Storage brackets for these riser brackets are not included.

$1,346.99

Miller Universal Fork Holder, 3.5"x4"

Miller offset fork adapter for 3.5" x 4" crossbars. This fork adapter is commonly used on Vulcan V30 Wreckers.

$736.99

Miller Chain Hook Adapter Set

Miller Industries chain hook adapter kit. These chain hook tow bar adapters are specifically designed to fit the cast profile fork holders of Century and Vulcan Heavy Duty Wreckers. They are used when lifting a load when chains are required. For more versatility they may moved back and forth on the crossbar to fit the size of the load being picked up. Sold as a pair.

$1,029.99

Miller DP Winch Half Round 13 3/4" Rub Bar

A 13-3/4" half round rub bar on the tensioner plate for DP winches.

$341.99

Miller Fold Down Bus Lift Storage System

This Miller Industries Tire Lift Storage Bracket folds down for easy access to either Part Number

$1,009.99

Miller Fifth Wheel King Pin Adapter 16 Ton Wreckers

This is a Miller Industries Pintle Hook and Fifth Wheel Adapter Kit. It is designed specifically for Miller 16 ton wreckers including the Vulcan V-30, Century 3212, Vulcan V-24 and Holmes 600R. It fits a 3" x 4" crossbar.

$1,949.99

Miller Loop Harness 21' Century 16 Series Gen II Carriers

Miller Industries' winch loop harness assembly for 21' Century and Vulcan 16 Series Generation 2 LCG Car Carriers.

$215.99

Miller DP Winches 14 1/2" Wide Drum Cable Tensioner Kit

A cable tensioner kit for DP winches with a 14-1/2" wide drum.

$760.99

Miller Bearing Pad Kit Steel LCG

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 10 and 12 Series Steel LCG Car Carrier. See Features for a list of parts that are included. This kit is for the Gen1 series beds

(2) 12-0308927-16 5/16"x16" LCG Subframe Bearing Pads
(2) 12-0308927-66 5/16"x66" LCG Subframe Bearing Pads
(2) 12-0308927-96 5/16"x96" LCG Subframe Bearing Pads
(38) 12-0403114 1/4-20x1"x82 Deg Torx Scres
(2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads

$876.99

Miller Offset Fork Holder Set for 4" x 4" Crossbar

These Low Profile Fork Holders are designed to fit a 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products . This fork holder set includes the right and left hand sides.

$2,298.99

Miller Forklift to Wheel Lift Attachment

The Eagle Fork-lift Attachment. Fast, damage free, car moving machine. Turns a forklift into a fast efficient yard truck! Move cars quickly from parking spots, within storage yards or salvage lots. All you need is a forklift. Just slide the forks into the receivers and you are ready to go. No hydraulics just a simple rotating mechanism which wraps around the car tires!

$6,289.99

Miller Chain Hook End Caps (4024), 4" Crossbar

Miller Industries Hook End Cap. Fits a Century 4024 Wrecker with a 4" crossbar. Sold as Pairs.

$726.99

Miller Riser Bracket

This Riser Bracket is standard on all rotators and optional of all other models. This riser bracket fits on a 4" crossbar. Sold as pair.

$1,148.99

Miller 16 Ton Fifth Wheel Assembly

This fifth wheel assembly from Miller Industries is used with 16 Ton Wreckers Pintle Hitch Adapters. This kit includes quick pin, handle grip, linch pin, 5th wheel bracket, lock pin and pivot pit adapter.

$862.99

Miller 25,000 lb. (50 - 75 Ton) Tire Lift

Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar). This New Tire Lift (124002808) Will Include The Upgraded Crossbar (124002838) When Ordered On With A New Wrecker Unit.

$6,716.99

Miller Dp O-Ring

DP freewheel piston o'ring , 9736 for S50 winch

$11.09

Miller Bearing Pad Kit Steel Carrier 21.5' / 22' 2"

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21'6" & 22'2" Stee l Car Carrier. See Features for a list of parts that are included.

$822.99

Miller Heavy Duty Tire Lift Storage Bracket (XP850 Side Puller)

This XP850 Bus Lift Storage System is from Miller Industries. Designed specifically for storage behind the XP850 Side Puller. Frame Mount. This system can be used with both

$2,760.99

Miller DP Winches Half Round 14 1/2" Rub Bar

A 14-1/2" half round rub bar on the tensioner plate for DP winches.

$357.99

Miller 47" Vulcan HD Pylon

47" H.D. Light Pylon with Wings and Aluminum Dress-Up Kit for 3212, V30 & V100(Vulcan Style). Does Not Include Optional light bars or Work Lights.

$3,595.99

Miller 6,000 LB Tire Lift Kit (4" x 4" Crossbars)

Miller Industries 6,000 Lb. Tire Lift System To Fit a 4" x 4" Crossbar. Fits 1624, CH20, 4024 Wrecker Models.

$4,110.99

Miller DP Winch Half Round 11" Rub Bar

This is a 11" half round rub bar on the tensioner plate for DP winches.

$473.99

Miller Heavy Duty "Euro" Style Bus Lift 5" x 5" Crossbar

Miller Industries has begun manufacturing a Tire Lift System for the North American market that was originally pioneered by Boniface Engineering of England several decades ago. This attachment will only be available with units offering the 5 x 5 crossbar. It is capable of towing vehicles from both the front and rear axles, in either single or dual tire applications. It offers versatility, with a wide range of adjustment for nearly all sizes of tire, as well as axle widths.

$5,623.99

Miller Towbar Adapter Chevron Autoloaders

These are towbar adapters that fit on the crossbar of a Chevron Autogrip wrecker by Miller Industries. These specialty attachments allow for proffessional and easy hookups when towing wrecked vehicles or trucks with steel bumpers. These adapters are sold as a pair and Chains are not included.

$1,431.99

Miller Offset Fork Holder

This is an offset fork holder from Miller Industries. These forks come on 25 ton and larger wreckers. This offset fork holder fits a 5" crossbar. Sold as pair.

$1,649.99

Miller Lift Fork Riser Set

Miller Industries Fork Risers for a 614. Fits a 3.5" x 3.5" Crossbar.

$850.99

Miller Curved Axle Fork Set

This replacement Curved Axle Fork Set from Miller Industries features a short front lead fork to easily fit under an axle. The rounded inner design fits nicely around the axle.

$931.99

Miller Offset Fork Set 6"

Miller Industries Offset Fork Adapter. This fork adapter will fit SDU units with a 6"x6" crossbar.

$1,164.99

Miller Decal-Winch Air Free Spool

This is a Miller decal-winch air free spool.

$27.49

Miller Cable Tensioner for 12,000 lb. Winches

This Cable Tensioner from Miller Industries is to be used with a 12,000 lb. winch. This is used on 10, 12 and 16 Series Carriers with the optional 12,000 lb. winch.

$181.99

Miller Bearing Pad Kit Steel 19' 6" Prior '10

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 19'6" Steel Car Carrier prior to 2010. See Features for a list of parts that are included.

$587.99

Miller Bearing Pad Kit Steel 20' 2" Prior '10

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 20'2" Steel Car Carrier Prior to 2010. See Features for a list of parts that are included.

$646.99

Miller Replacement 12,000 lbs Ramsey Winch

This is a replacement 12,000 lbs Ramsey winch used on Miller Carriers.

$4,868.99

Miller Bearing Pad Kit Steel Carrier 17' 6"

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 17'6" Steel Car Carrier. See Features for a list of parts that are included.

$780.99

Miller Bearing Pad Kit Right Approach 22' 2"

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 22'2" Right Approach Car Carrier. See Features for a list of parts that are included.

$1,102.99

Parker Ramsey H600 Winch / Century 1624 Wrecker Winch Motor

This is a replacement hydraulic motor that runs the hydraulic assembly on the Century 1624 medium duty wrecker equipped with a Ramsey H-600 winch from Miller Industries. To view which specific models this motor will fit, see Features below. To view the part schematics, see the Brochure tab.

$1,193.99

Miller Offset Fork Holder Extensions

The extensions were designed to provide extra width out of the lift fork adapters when needed. Place the extensions into the fork adapters, install the retaining bolts, slide to the desired width and it's ready to tow. Extensions sold by the pair and will only fit the low profile cast fork holders.

$1,391.99

Miller 25,000 lb. (50 - 75 Ton) Tire Lift

Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar).

$6,716.99

Parker 4 Ton Winch Motor

This is a replacement Parker winch motor. It is used on the hydraulic assembly of car carriers and wreckers equipped with 8,000 lb. winches. This winch motor is commonly used on hydraulic worm winches, such as Ramsey Winches. This motor is used on Century, Chevron, Champion, Challenger, Holmes, and Vulcan Car Carriers. It is also used on Century, Challenger, Champion, and Eagle light duty wreckers. To view what specific models this winch motor will fit, See Features below. To view the part schematics, see the Brochures tab.

$685.99

Miller 11" Cable Tensioner

This OEM Factory Replacement Cable Tensioner, from Miller Industries, will keep constant pressure against your winch drum, which mak es your wire rope wind smoother. This 11" wide tensioner is easy to install and keeps your cable from free spooling. It will fit Ram sey 8,000 lb. worm style winches on Century Car Carriers. This part can be used to replace Part Number 124001329.

$183.99

Jerr-Dan Carrier Tensioner Plate

Dimensions: 9 3/4" x 5" x 6"

$71.99

Miller Heavy Duty 8.5" Fairlead Roller

This 8.5" Heavy Duty Roller Fairlead from Miller Industries is for Century, Challenger, Champion and Vulcan Carrier Beds with a Ramsey Worm Style Winch. This fairlead fits 10 Series, 15 Series, 20 Series, 12 Series LCGs and 16 Series LCGs. This roller fairlead is designed to reduce cable wear, especially on sharp angle pulls. To view specific models of carrier this fairlead will fit see Features below. To view part schematics click on the Brochures tab.

$229.99

Miller DP Winch Tensioner Air Bag

This is a replacement air bag used on DP winch tensioners on all DP Winches.

$195.99

1/2 13 Hex Jam Nut Zp

This Hex Jam Nut from Miller Industries has a 1/2" diameter with 13 threads per inch. It isused on the Winch Clutch Control of 4-Ton Hydraulic Winches, H-246 and HD-200R. This winch assembly is used on several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.

$0.39

Miller Jam Nut Hex 3/8" 16 Winch Clutch Control

This Hex Jam Nut from Miller Industries is used on the Winch Clutch Control of 4-Ton Hydraulic Winches,

$0.29

Miller Winch Clutch Control Assembly Bent Rod

This Winch Clutch Control Assembly from Miller Industries makes reaching your Carrier Clutch Release easier than ever. It is used in the assembly of a Vulcan 10 Series Steel & Aluminum Car Carrier made after 2005. Please see the brochure tab for a breakdown.

$316.99

Miller DP Winch 13 3/4" Wide Drum Cable Tensioner Kit

This is a cable tensioner kit for DP winches with a 13-3/4" wide drum.

$975.99

Miller 5th Wheel Plate Attachment (Heavy Duty Wreckers)

This adapter requires

$768.99

Miller Screw 3/8 x 2 1/2 Winch Clutch Control

This Screw from Miller Industries is used in the Winch Clutch Control assembly of several Miller car Carriers. These include Century, Champion, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.

$6.89

Miller T Handle Winch Clutch Control

This T Handle from Miller Industries is used in the Winch Clutch Control assembly of several Miller car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.

$10.69

Miller Cable Tensioner Assembly H-400 Winch

This Cable Tensioner Assembly from Miller Industries is used on H-400 Ramsey Winch. This assembly is used on a Century 10 Series Car Carriers. Please see the brochure tab for a breakdown.

$306.99

Miller Bearing Pad Kit Steel 21' Prior '10

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.

(6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
(2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
(2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
(2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
(44) 12-0400367 1/4-20 Nylon Lock Nuts
(44) 12-0403009 1/4-20x1" Hold Down Screws
(10) 12-0403010 1-4-20x5/8" Self-Tapping Screws

$623.99

Miller DP Winch 12" Wide Drum Cable Tensioner Kit

This is a 12" cable tensioner kit for DP Model # 52864 winches and other DP winches with a 12" wide drum.

$865.99

Miller Industries Pivoting Springlift Fork Set

This self-aligning fork from Miller Industries attaches to the spring itself. The fork hinging action assures alignment while lifting. This part can be used to replace Part Numbers: 12-0801090 and 124001721.

$1,029.99

Miller Fluid Tube Ramsey Winch LCG Car Carrier

This is a replacement fluid tube for a LCG Car Carrier by Miller Industries. This tube connects the winch motor to the under body line beneath the bed of the car carrier.

$58.99

Miller Pintle Hook Adapter HD Wreckers

Note: Special Handling Fees Apply

This Pintle Hitch and Fifth Wheel Adapter from Miller Industries is designed to fit into the cast steel fork receivers. This will increase the versatility of your towing unit. Install it into the fork holders from the top of the wheel plate, or from the bottom using the King Pin Adapter. It also includes a Pintle Hook rated at 15 tons for maximum capacity when towing. This hitch also works as an adapter for the Miller Trailer Fifth Wheel Plate Part #124001833 and the Miller King Pin Attachment Part #124001948. (Does Not Fit 3212/V30) Shipped Loose. Fifth Wheel Plate and King Pin Attachments Not Included.

Use from the top of your fork holders with the 124001833 fifth wheel plate adapter
Use from the bottom of your fork holders with the 124001948 king pin adapter
Includes a pintle hook rated at 30,000 lbs. for towing

$1,163.99

Miller DP Winch Half Round 12" Rub Bar

A 12" half round rub bar on the tensioner plate for DP Model # 52864 winches and other DP winches with a 12" wide drum.

$268.99

Miller Spade Weldment Dock Stabilizer Tube 5" x 4"

This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.

$247.99

Miller Cable Tensioner Spring

This Cable Tensioner Spring from Miller Industries is used on the Cable Tensioner Assembly of a standard 4-Ton Winch. This assembly can be found on a Century, Champion, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

$24.99

1 - 60 of 111 items