Winches

Zip’s AW Direct stocks a variety of high-quality winches you can count on to provide the pulling power you need for any rigging, lifting and recovery situation. Rely on such trusted manufacturers as Warn, Ramsey and Mile Marker to supply the right winches for your ATVs and off-road vehicles. Truck and trailer winches and industrial winches for cranes and wreckers are also available here. Gear options include hydraulic worm and planetary drives with manual clutch, air clutch and remote clutch. Choose from short drum, long drum and standard drum with A-Rotation, B-Rotation, Clockwise and Counterclockwise motion. Manual cable hoists, hand winches and come-along winches can also be found online at Zip's AW Direct.

Sort by

Miller 5" x 5" Crossbar Riser Bracket Set

These Riser Brackets from Miller Industries are used when extra height is needed while towing. The riser brackets are manufactured in a welded design and incorporate a 1/2" grab hook welded to one side. With these brackets you will gain an extra 8.5" of height. Brackets will fit on a 5" x 5" heavy duty crossbar. These Riser Brackets are standard on 9055, Option for FIIIT, SDU, 5130, 5230 and 7035. Storage brackets for these riser brackets are not included.

$1,346.99

Miller Universal Fork Holder, 3.5"x4"

Miller offset fork adapter for 3.5" x 4" crossbars. This fork adapter is commonly used on Vulcan V30 Wreckers.

$736.99

Miller Chain Hook Adapter Set

Miller Industries chain hook adapter kit. These chain hook tow bar adapters are specifically designed to fit the cast profile fork holders of Century and Vulcan Heavy Duty Wreckers. They are used when lifting a load when chains are required. For more versatility they may moved back and forth on the crossbar to fit the size of the load being picked up. Sold as a pair.

$1,029.99

Miller Fold Down Bus Lift Storage System

This Miller Industries Tire Lift Storage Bracket folds down for easy access to either Part Number

$1,009.99

Miller Fifth Wheel King Pin Adapter 16 Ton Wreckers

This is a Miller Industries Pintle Hook and Fifth Wheel Adapter Kit. It is designed specifically for Miller 16 ton wreckers including the Vulcan V-30, Century 3212, Vulcan V-24 and Holmes 600R. It fits a 3" x 4" crossbar.

$1,949.99

Miller Offset Fork Holder Set for 4" x 4" Crossbar

These Low Profile Fork Holders are designed to fit a 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products . This fork holder set includes the right and left hand sides.

$2,298.99

Miller Forklift to Wheel Lift Attachment

The Eagle Fork-lift Attachment. Fast, damage free, car moving machine. Turns a forklift into a fast efficient yard truck! Move cars quickly from parking spots, within storage yards or salvage lots. All you need is a forklift. Just slide the forks into the receivers and you are ready to go. No hydraulics just a simple rotating mechanism which wraps around the car tires!

$6,289.99

Miller Chain Hook End Caps (4024), 4" Crossbar

Miller Industries Hook End Cap. Fits a Century 4024 Wrecker with a 4" crossbar. Sold as Pairs.

$726.99

Miller Riser Bracket

This Riser Bracket is standard on all rotators and optional of all other models. This riser bracket fits on a 4" crossbar. Sold as pair.

$1,148.99

Miller 16 Ton Fifth Wheel Assembly

This fifth wheel assembly from Miller Industries is used with 16 Ton Wreckers Pintle Hitch Adapters. This kit includes quick pin, handle grip, linch pin, 5th wheel bracket, lock pin and pivot pit adapter.

$862.99

Miller 25,000 lb. (50 - 75 Ton) Tire Lift

Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar). This New Tire Lift (124002808) Will Include The Upgraded Crossbar (124002838) When Ordered On With A New Wrecker Unit.

$6,716.99

Miller Heavy Duty Tire Lift Storage Bracket (XP850 Side Puller)

This XP850 Bus Lift Storage System is from Miller Industries. Designed specifically for storage behind the XP850 Side Puller. Frame Mount. This system can be used with both

$2,760.99

Miller 6,000 LB Tire Lift Kit (4" x 4" Crossbars)

Miller Industries 6,000 Lb. Tire Lift System To Fit a 4" x 4" Crossbar. Fits 1624, CH20, 4024 Wrecker Models.

$4,110.99

Miller Heavy Duty "Euro" Style Bus Lift 5" x 5" Crossbar

Miller Industries has begun manufacturing a Tire Lift System for the North American market that was originally pioneered by Boniface Engineering of England several decades ago. This attachment will only be available with units offering the 5 x 5 crossbar. It is capable of towing vehicles from both the front and rear axles, in either single or dual tire applications. It offers versatility, with a wide range of adjustment for nearly all sizes of tire, as well as axle widths.

$5,623.99

Miller Towbar Adapter Chevron Autoloaders

These are towbar adapters that fit on the crossbar of a Chevron Autogrip wrecker by Miller Industries. These specialty attachments allow for proffessional and easy hookups when towing wrecked vehicles or trucks with steel bumpers. These adapters are sold as a pair and Chains are not included.

$1,431.99

Miller Offset Fork Holder

This is an offset fork holder from Miller Industries. These forks come on 25 ton and larger wreckers. This offset fork holder fits a 5" crossbar. Sold as pair.

$1,649.99

Miller Lift Fork Riser Set

Miller Industries Fork Risers for a 614. Fits a 3.5" x 3.5" Crossbar.

$850.99

Miller Curved Axle Fork Set

This replacement Curved Axle Fork Set from Miller Industries features a short front lead fork to easily fit under an axle. The rounded inner design fits nicely around the axle.

$931.99

Miller Offset Fork Set 6"

Miller Industries Offset Fork Adapter. This fork adapter will fit SDU units with a 6"x6" crossbar.

$1,164.99

Miller Replacement 12,000 lbs Ramsey Winch

This is a replacement 12,000 lbs Ramsey winch used on Miller Carriers.

$4,868.99

Miller Offset Fork Holder Extensions

The extensions were designed to provide extra width out of the lift fork adapters when needed. Place the extensions into the fork adapters, install the retaining bolts, slide to the desired width and it's ready to tow. Extensions sold by the pair and will only fit the low profile cast fork holders.

$1,391.99

Miller 25,000 lb. (50 - 75 Ton) Tire Lift

Miller Industries 25,000 lb. Tire Lift For The Century 7035, 9055 and Rotator Series, Vulcan V-70, V-100 and Challenger's Complete Line of Towing and Recovery units (5" x 5" Crossbar).

$6,716.99

Miller 5th Wheel Plate Attachment (Heavy Duty Wreckers)

This adapter requires

$768.99

Miller Industries Pivoting Springlift Fork Set

This self-aligning fork from Miller Industries attaches to the spring itself. The fork hinging action assures alignment while lifting. This part can be used to replace Part Numbers: 12-0801090 and 124001721.

$1,029.99

Miller Pintle Hook Adapter HD Wreckers

Note: Special Handling Fees Apply

This Pintle Hitch and Fifth Wheel Adapter from Miller Industries is designed to fit into the cast steel fork receivers. This will increase the versatility of your towing unit. Install it into the fork holders from the top of the wheel plate, or from the bottom using the King Pin Adapter. It also includes a Pintle Hook rated at 15 tons for maximum capacity when towing. This hitch also works as an adapter for the Miller Trailer Fifth Wheel Plate Part #124001833 and the Miller King Pin Attachment Part #124001948. (Does Not Fit 3212/V30) Shipped Loose. Fifth Wheel Plate and King Pin Attachments Not Included.

Use from the top of your fork holders with the 124001833 fifth wheel plate adapter
Use from the bottom of your fork holders with the 124001948 king pin adapter
Includes a pintle hook rated at 30,000 lbs. for towing

$1,163.99

Miller Replacement 8,000 lbs Winch with Air Shift

Miller Industries replacement 8,000 lbs winch with air shift. This winch is used with Chevron Car Carriers.

$2,762.99

Miller 8000SP2 Winch w/ Tensioner

Hydraulic recovery winch.

$2,705.99

Warn 15 Series Planetary Winch - Miller Carrier

$6,290.99

WINCH, 4T WORMGEAR HD234

$1,694.99

Miller Century Formula l 411 / 412 Worm Winch

This is a worm winch for small wreckers like the Century Formula I, 411 wrecker by Miller Industries. See Brochures for a reference chart.

$1,694.99

Miller Replacement Car Carrier Winch

This Ramsey 8,000 lbs winch is used on many Century, Vulcan, Champion, and Challenger Car Carriers. For common replacement winches please see the HD-200R and H-246 listed on zips.com.

$1,694.99

1 - 31 of 31 items

Winches for Every Application

Winches are essential tools for towing, recovery, industrial work, and trailer operations. Whether you’re outfitting a tow truck, flatbed, trailer, or off-road vehicle, having the right winch ensures safe and reliable pulling power. At Zip’s, we carry a wide range of winches for sale from trusted brands like Ramsey Winch, Warn Industries, and Mile Marker, with models suited for trucks, trailers, and industrial applications.

Why Choose a Winch

A truck winch or tow truck winch is more than just a pulling device—it’s a vital piece of equipment that provides safety, control, and efficiency. Choosing the right winch for your application depends on several factors:

Pulling Capacity: Winches are available in capacities ranging from 8,000 lbs to over 30,000 lbs, making them suitable for light-duty trailers all the way to heavy-duty industrial recovery.
Gear Types: Both planetary and worm gear winches are available, with planetary designs offering faster line speeds and worm gears delivering greater control under load.
Applications: Flatbed operators often rely on flatbed winches for secure loading, while industrial users may need high-capacity winches for construction, mining, or utility work.
Power Source: Winches are powered manually, electrically, or hydraulically, giving you flexibility depending on your equipment setup.

Types of Winches Available

We stock a complete range of winches to meet different professional and recreational needs:

Hydraulic Winches – Best suited for heavy-duty towing and industrial recovery work.
Electric Winches – Versatile and widely used for trucks, trailers, and off-road vehicles.
Manual Winches – Simple and reliable, ideal for lighter loads and portable use.

Each type has unique advantages, and you’ll find them organized into sub-categories for easier selection.

Trusted Winch Brands

Quality matters when it comes to safety and performance. That’s why we carry top brands known for their innovation and reliability:

Ramsey Winch – Industry leader in hydraulic and industrial winches.
Warn Industries – Known for rugged winches trusted in recovery and off-road applications.
Mile Marker – Affordable and dependable winches designed for both trucks and trailers.

Winch Parts and Accessories

To keep your winch in peak condition, explore our full selection of winch parts. From replacement cables and hooks to mounting hardware and lubricants, we stock everything needed to maintain safe and reliable performance.

Helpful Resources

Not sure which winch is right for your truck or trailer? Our blog covers everything from sizing to maintenance:

FAQ: Winches

What size winch do I need for my truck or trailer?
A good rule of thumb is to choose a winch rated for at least 1.5 times the weight of the vehicle or load you’ll be pulling.

What’s the difference between planetary and worm gear winches?
Planetary gear winches offer faster line speeds and compact designs, while worm gear winches provide smoother control and better load holding.

Can I use the same winch for towing and industrial applications?
Many heavy-duty winches are versatile, but always match the winch’s line pull and design to your specific application for safety.

How do I maintain my winch?
Regular inspection, lubrication, and proper cable care extend the life of your winch. Refer to our How to Maintain Your Winch guide for best practices.

Do you carry winches for trailers?
Yes, we stock a range of trailer winches designed for secure loading and transport, including options for flatbeds and enclosed trailers.